SIST EN 2997-002:2016
(Main)Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 002: Specification of performance and contact arrangements
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 002: Specification of performance and contact arrangements
This European Standard defines the performance and contact arrangements of circular electrical connectors, coupled by threaded ring. It also lists the product standards and models available for selection in this series.
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C konstant, 200 °C konstant, 260 ° C Spitze - Teil 002: Leistungsdaten und Kontaktanordnungen
Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d'utilisation - 65 °C à 175 °C continu, 200 °C continu, 260 °C en pointe - Partie 002 : Spécification de performances et d'arrangements des contacts
Aeronavtika - Konektorji, električni, okrogli, priključeni z navojnim obročkom, odporni ali neodporni proti ognju, s stalno delovno temperaturo med –65 °C in 175 °C, stalno 200 °C, najvišjo 260 °C - 002. del: Specifikacija lastnosti in razporeditev kontaktov
Ta evropski standard določa lastnosti in razporeditev kontaktov okroglih električnih konektorjev, priključenih z navojnim obročkom. Prav tako navaja standarde za izdelke in modele, ki so na izbiro v tej seriji.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NRQWDNWRYLuft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C konstant, 200 °C konstant, 260 ° C Spitze - Teil 002: Leistungsdaten und KontaktanordnungenSérie aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d'utilisation - 65 °C à 175 °C continu, 200 °C continu, 260 °C en pointe - Partie 002 : Spécification de performances et d'arrangements des contactsAerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 002: Specification of performance and contact arrangements49.060Aerospace electric equipment and systems31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 2997-002:2016SIST EN 2997-002:2016en,fr,de01-november-2016SIST EN 2997-002:2016SLOVENSKI
STANDARDSIST EN 2997-002:20121DGRPHãþD
SIST EN 2997-002:2016
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2997-002
September
t r s x ICS
v {ä r x r Supersedes EN
t { { yæ r r tã t r s tEnglish Version
Aerospace series æ Connectorsá electricalá circulará coupled by threaded ringá fireæresistant or non fireæresistantá operating temperatures æ
x w
¹C to
s y w
¹C continuousá
t r r
¹C continuousá
t x r
¹C peak æ Part
r r tã Specification of performance and contact arrangements Série aérospatiale æ Connecteurs électriques circulaires à accouplement par bague filetéeá résistant au feu ou noná températures d 5utilisation æ
x w
¹C à
s y w
¹C continuá
t r r
¹C continuá
t x r
¹C en pointe æ Partie
r r t ã Spécification de performances et d 5arrangements des contacts
Luftæ und Raumfahrt æ Elektrische Rundsteckverbinder mit Schraubkupplungá feuerbeständig oder nicht feuerbeständigá Betriebstemperaturen æ
x w
¹C bis
s y w
¹C konstantá
t r r
¹C konstantá
t x r
¹ C Spitze æ Teil
r r tã Leistungsdaten und Kontaktanordnungen This European Standard was approved by CEN on
v April
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
t { { yæ r r tã t r s x ESIST EN 2997-002:2016
EN 2997-002:2016 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope .4 2 Normative references .4 3 Model description and codification of models .6 4 Terms and definitions .8 5 Operating conditions .8 6 Connector type codes . 10 7 Polarization . 12 8 Housing sizes and contact arrangements . 13 9 Contacts . 22 10 Sealing plugs . 22 11 Cable outlets . 22 12 Tooling . 22 13 Assembly and wiring instruction . 22
SIST EN 2997-002:2016
EN 2997-002:2016 (E) 3 European foreword This document (EN 2997-002:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall be withdrawn at the latest by March 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 2997-002:2012. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 2997-002:2016
EN 2997-002:2016 (E) 4 Introduction This family of connectors is derived from MIL-DTL-83723 series III, type T with which it is intermateable. 1 Scope This European Standard defines the performance and contact arrangements of circular electrical connectors, coupled by threaded ring. It also lists the product standards and models available for selection in this series. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-202, Aerospace series — Elements of electrical and optical connection — Test methods — Part 202: Contact resistance at rated current EN 2591-209, Aerospace series — Elements of electrical and optical connection — Test methods — Part 209: Current temperature derating EN 2997-001, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 001: Technical specification EN 2997-003, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 003: Square flange receptacle — Product standard EN 2997-004, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 004: Jam-nut mounted receptacle — Product standard EN 2997-005, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 005: Hermetic square flange receptacle — Product standard EN 2997-006, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 006: Hermetic jam-nut mounted receptacle — Product standard EN 2997-007, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 007: Hermetic receptacle with round flange attached by welding or brazing — Product standard SIST EN 2997-002:2016
EN 2997-002:2016 (E) 5 EN 2997-008, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 008: Plug — Product standard EN 2997-009, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 009: Protective cover for receptacle — Product standard EN 2997-010, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 010: Protective cover for plug — Product standard EN 2997-011, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 011: Dummy receptacle — Product standard EN 2997-012, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 012: Jam-nut for jam-nut receptacles — Product standard EN 2997-013, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 013: O-ring seal for jam-nut receptacles — Product standard EN 2997-014, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 014: Square flange receptacle with integrated accessory — Product standard EN 2997-015, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 015: Jam-nut mounted receptacle with integrated accessory — Product standard EN 2997-016, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak — Part 016: Plug with integrated accessory — Product standard EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of contacts EN 3155-004, Aerospace series — Electrical contacts used in elements of connection — Part 004: Contacts, electrical, male, type A, crimp, class T — Product standard EN 3155-005, Aerospace series — Electrical contacts used in elements of connection — Part 005: Contacts, electrical, female, type A, crimp, class T — Product standard EN 3155-018, Aerospace series — Electrical contacts used in elements of connection — Part 018: Contacts, electrical, male, type A, crimp, class S — Product standard EN 3155-019, Aerospace series — Electrical contacts used in elements of connection — Part 019: Contacts, electrical, female, type A, crimp, class S — Product standard EN 3155-080, Aerospace series — Electrical contacts used in elements of connection — Part 080: Contacts, size 22 for EN 2997, electrical, male, type A, crimp, class T — Product standard SIST EN 2997-002:2016
EN 2997-002:2016 (E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.