SIST EN 4165-013:2025

Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard

This document specifies cable clamps for 2 and 4 module connectors, series 2 and series 3 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.

Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise, Betriebstemperatur 175 °C konstant - Teil 013: Gehäuse mit Zugentlastung für Steckverbinder mit 2 und 4 Modulen, Serie 2 und Serie 3 - Produktnorm

Dieses Dokument legt die Gehäuse mit Zugentlastung für Steckverbinder mit 2 und 4 Modulen, Serie 2 und Serie 3, fest, die in der Familie der elektrischen Rechtecksteckverbinder verwendet werden, Betriebstemperatur 175 °C konstant.

Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température d'utilisation 175 °C continu - Partie 013 : Serre-câbles 2 et 4 modules pour connecteurs, série 2 et série 3 - Norme de produit

Le présent document spécifie les serre-câbles série 2 et série 3, pour les connecteurs à 2 et 4 modules, utilisés dans la famille des connecteurs électriques rectangulaires modulaires, température d'utilisation 175 °C continu.

Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna temperatura 175 °C - 013. del: Kabelske objemke z 2 ali 4 moduli za konektorje, serija 2 in serija 3 - Standard za proizvod

Ta dokument določa kabelske objemke z 2 ali 4 moduli za konektorje, serija 2 in serija 3, ki se uporabljajo v družini pravokotnih električnih konektorjev pri stalni delovni temperaturi 175 °C.

General Information

• Status: Published
• Public Enquiry End Date: 22-Feb-2022
• Publication Date: 08-Dec-2024
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 02-Dec-2024
• Due Date: 06-Feb-2025
• Completion Date: 09-Dec-2024
• Ref Project: EN 4165-013:2024 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard

Relations

• Revised: SIST EN 4165-013:2017 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and 3 - Product standard
• Effective Date: 19-Jan-2023

Overview

EN 4165-013:2024 is a CEN (ASD‑STAN) product standard for cable clamps used with aerospace rectangular modular electrical connectors (series 2 and series 3). The standard covers cable clamp designs for 2‑module and 4‑module connectors and explicitly applies to systems rated for a continuous operating temperature of 175 °C. EN 4165-013:2024 updates and supersedes the 2016 edition, adds the operating temperature to the scope, and clarifies marking and optional designs.

Key topics and requirements

• Scope: Cable clamps for 2 and 4 module connectors, series 2 and series 3, within the EN 4165 family; continuous operating temperature 175 °C.
• Design classes: Covers classes W, F (for 2‑ and 4‑module clamps) and C (lighter designs), with specific figures and optional variants.
• Dimensions and masses: Drawn dimensions are specified in figures; example mass limits from the standard:
  • 2‑module (W/F): max 23.1 g
  • 4‑module (W/F): max 34 g
  • 2‑module (C): max 4.5 g
  • 4‑module (C): max 5.9 g
• Intermateability: Maximum envelope dimensions for intermateability are provided - 2 modules: 40.4 mm max; 4 modules: 70.9 mm max (figures differ by class).
• Marking and designation: Mandatory marking includes the identity block (designation per Clause 6), date of manufacture (year‑week), and manufacturer name or trademark.
• Normative references and technical specification: Conformance is linked to EN 4165‑001 (technical specification) and EN 4165‑002 (performance and contact arrangements); technical performance must comply with EN 4165‑001.
• Regulatory status: Approved February 2024; to be adopted as national standard by CEN members (implementation deadline May 2025).

Applications and users

EN 4165-013:2024 is targeted at professionals working with high‑temperature aerospace electrical installations, including:

• Aerospace connector and cable clamp manufacturers
• Electrical/mechanical design engineers and connector system designers
• Procurement and specification writers for airframe and avionics suppliers
• Maintenance, repair and overhaul (MRO) teams and certification authorities

Typical uses include specifying and sourcing cable clamps that ensure mechanical strain relief, correct envelope fit, and compatibility (intermateability) with series 2 and 3 rectangular modular connectors in high‑temperature aerospace environments.

Related standards

• EN 4165-001 - Technical specification for the EN 4165 connector family
• EN 4165-002 - Specification of performance and contact arrangements
• Other EN 4165 parts addressing connector interfaces and performance

Keywords: EN 4165-013:2024, cable clamp, rectangular modular connector, aerospace connectors, operating temperature 175 °C, series 2, series 3, intermateability, connector design, EN 4165.

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2025
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna
temperatura 175 °C - 013. del: Kabelske objemke z 2 ali 4 moduli za konektorje,
serija 2 in serija 3 - Standard za proizvod
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature
175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and
series 3 - Product standard
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise,
Betriebstemperatur 175 °C konstant - Teil 013: Gehäuse mit Zugentlastung für
Steckverbinder mit 2 und 4 Modulen, Serie 2 und Serie 3 - Produktnorm
Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température
d'utilisation 175 °C continu - Partie 013 : Serre-câbles 2 et 4 modules pour connecteurs,
série 2 et série 3 - Norme de produit
Ta slovenski standard je istoveten z: EN 4165-013:2024
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4165-013
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2024
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 4165-013:2016
English Version
Aerospace series - Connectors, electrical, rectangular,
modular - Operating temperature 175 °C continuous - Part
013: Cable clamp 2 and 4 modules for connectors, series 2
and series 3 - Product standard
Série aérospatiale - Connecteurs électriques Luft- und Raumfahrt - Elektrischer
rectangulaires modulaires - Température d'utilisation Rechtecksteckverbinder in modularer Bauweise -
175 °C continu - Partie 013 : Serre-câbles 2 et 4 Betriebstemperatur 175 °C konstant - Teil 013:
modules pour connecteurs, série 2 et série 3 - Norme Gehäuse mit Zugentlastung für Steckverbinder mit 2
de produit und 4 Modulen, Serie 2 und Serie 3 - Produktnorm
This European Standard was approved by CEN on 5 February 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4165-013:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Cable clamp . 4
5.1 For 2 modules classes W and F . 4
5.2 For 4 modules classes W and F . 5
5.3 For 2 modules class C. 6
5.4 For 4 modules class C. 7
5.5 Cable clamp class . 8
5.6 Intermateability for series 2 and series 3 . 8
6 Designation .
...