oSIST prEN IEC 60115-8:2024/oprAA:2024
(Amendment)Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
This part of IEC 60115 is applicable to fixed surface mount resistors for use in electronic equipment.
These resistors are typically described according to types (different geometric shapes) and styles (different dimensions)
and product technology. These resistors have metallized terminations and are primarily intended to be mounted directly
onto a circuit board.
The object of this document is to specify preferred ratings and characteristics and to select from IEC 60115-1, the
appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements
for this type of resistor
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 8: Rahmenspezifikation - Oberflächenmontierbare (SMD) Festwiderstände
Résistances fixes utilisées dans les équipements électroniques - Partie 8: Spécification intermédiaire - Résistances fixes pour montage en surface
Stalni upori za elektronsko opremo - 8. del: Področna specifikacija - Fiksni upori za površinsko montažo - Dopolnilo AA
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Stalni upori za elektronsko opremo - 8. del: Področna specifikacija - Fiksni upori
za površinsko montažo - Dopolnilo AA
Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed
surface mount resistors
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 8:
Rahmenspezifikation - Oberflächenmontierbare (SMD) Festwiderstände
Résistances fixes utilisées dans les équipements électroniques - Partie 8: Spécification
intermédiaire - Résistances fixes pour montage en surface
Ta slovenski standard je istoveten z: prEN IEC 60115-8:2024/prAA:2024
ICS:
31.040.10 Fiksni upor Fixed resistors
oSIST prEN IEC 60115- en
8:2024/oprAA:2024
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 60115-8:2024
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
October 2024
ICS 31.040.10 -
English Version
Fixed resistors for use in electronic equipment - Part 8: Sectional
specification - Fixed surface mount resistors
Résistances fixes utilisées dans les équipements Festwiderstände zur Verwendung in Geräten der Elektronik
électroniques - Partie 8: Spécification intermédiaire - - Teil 8: Rahmenspezifikation - Oberflächenmontierbare
Résistances fixes pour montage en surface (SMD) Festwiderstände
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60115-8:2024; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2025-01-03.
It has been drawn up by CLC/TC 40XB.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 79288 Ref. No. prEN IEC 60115-8:2024/prAA:2024 E
prEN 60115-8:2024/prAA:2024
Contents Page
1 1 Modification to Annex X . 4
2 2 Addition of Annex ZA . 4
3 Annex ZA (normative) Normative references to international publications with their
4 corresponding European publications . 5
5 3 Addition of a new Annex ZX. 5
6 Annex ZB (informative) Cross-references for references to the prior revision of this document
7 6
prEN 60115-8:2024/prAA:2024
8 European foreword
9 This document (prEN IEC 60115-8:2024/prAA:2024) has been prepared by CLC/TC 40XB, “Resistors”.
10 This document is currently submitted to the Enquiry.
11 The following dates are proposed:
• latest date by which the existence of this document (doa) dor + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of an
identical national standard
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.