SIST EN 140101-806:2008/A1:2014

Detail Specification: Fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads

This blank detail specification is a supplementary  document to the sectional specification and  contains requirements for style and layout and  minimum content of detail specifications. Detail  specifications not complying with these  requirements shall not be considered as being in  accordance with European standards nor shall  they be so described.

Bauartspezifikation: Schicht-Festwiderstände niedriger Belastbarkeit - Metallschichtwiderstände auf hochwertiger Keramik, mit konformer Umhüllung und axialen oder vorgeformten Anschlüssen

Spécification particulière: Résistances fixes à couche et à faible dissipation - Résistances à couche métallique sur céramique de qualité supérieure, moulée ou disposant d'un revêtement enrobant, avec des sorties préformées ou axiales

Podrobna specifikacija: Fiksni plastni upori majhnih moči - Upori s kovinsko plastjo na visokokakovostni keramiki, z običajno prevleko ali zaliti, osni ali predoblikovani izvodi - Dopolnilo A1

Različni parametri tega sestavnega dela so natančno opredeljeni v tej specifikaciji. Neopredeljeni parametri so lahko pri posameznih sestavnih delih različni.

General Information

• Status: Published
• Publication Date: 08-Dec-2013
• ICS: 31.040.10 - Fixed resistors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 05-Dec-2013
• Due Date: 09-Feb-2014
• Completion Date: 09-Dec-2013
• Ref Project: EN 140101-806:2008/A1:2013 - Detail Specification: Fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads

Relations

• Amends: SIST EN 140101-806:2008 - Detail Specification: Fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads
• Effective Date: 12-Feb-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 140101-806:2008/A1:2014
01-januar-2014
3RGUREQDVSHFLILNDFLMD)LNVQLSODVWQLXSRULPDMKQLKPRþL8SRULVNRYLQVNR
SODVWMRQDYLVRNRNDNRYRVWQLNHUDPLNL]RELþDMQRSUHYOHNRDOL]DOLWLRVQLDOL
SUHGREOLNRYDQLL]YRGL'RSROQLOR$
Detail Specification: Fixed low power film resistors - Metal film resistors on high grade
ceramic, conformal coated or molded, axial or preformed leads
Bauartspezifikation: Schicht-Festwiderstände niedriger Belastbarkeit -
Metallschichtwiderstände auf hochwertiger Keramik, mit konformer Umhüllung und
axialen oder vorgeformten Anschlüssen
Spécification particulière: Résistances fixes à couche et à faible dissipation -
Résistances à couche métallique sur céramique de qualité supérieure, moulée ou
disposant d'un revêtement enrobant, avec des sorties préformées ou axiales
Ta slovenski standard je istoveten z: EN 140101-806:2008/A1:2013
ICS:
31.040.10 Fiksni upor Fixed resistors
SIST EN 140101-806:2008/A1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 140101-806:2008/A1:2014

---------------------- Page: 2 ----------------------

SIST EN 140101-806:2008/A1:2014

EUROPEAN STANDARD
EN 140101-806/A1

NORME EUROPÉENNE
November 2013
EUROPÄISCHE NORM

ICS 31.040.10


English version


Detail Specification: Fixed low power film resistors -
Metal film resistors on high grade ceramic, conformal coated or molded,
axial or preformed leads



Spécification particulière: Résistances Bauartspezifikation: Schicht-
fixes à couche et à faible dissipation - Festwiderstände niedriger Belastbarkeit -
Résistances à couche métallique sur Metallschichtwiderstände auf hochwertiger
céramique de qualité supérieure, moulée Keramik, mit konformer Umhüllung und
ou disposant d'un revêtement enrobant, axialen oder vorgeformten Anschlüssen
avec des sorties préformées ou axiales






This amendment A1 modifies the European Standard EN 140101-806:2008; it was approved by CENELEC on
2013-10-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 140101-806:2008/A1:2013 E

---------------------- Page: 3 ----------------------

SIST EN 140101-806:2008/A1:2014
EN 140101-806:2008/A1:2013 2
Co
...