SIST EN ISO 11680-1:2001

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Update of the target dates following mail from Duranton 960305.

Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfung für motorbetriebene Hochentaster - Teil 1: Geräte mit integriertem Verbrennungsmotor (ISO 11680-1:2000)

Anwendungsbereich
Dieser Teil der ISO 11680 enthält sicherheitstechnische Anforderungen und die Feststellung deren Übereinstimmung für die Gestaltung und Konstruktion von handgehaltenen Hochentastern (nachfolgend als ?Hochentaster" bezeichnet) mit integriertem Verbrennungsmotor als Antrieb, die mit einer Antriebswelle zur Kraftübertragungen auf die Schneidgarnitur ausgestattet sind. Die behandelten Schneidgarnituren sind Sägeketten, scherenartige Schneidvorrichtungen und rotierende Kreissägeblätter.
Dieser Teil der ISO 11680 beschreibt Verfahren für die Beseitigung oder Verringerung von Gefährdungen, die durch ihren Einsatz entstehen. Außerdem legt er die Art der Informationen für sichere Arbeitsweisen fest, die vom Hersteller zur Verfügung zu stellen sind. Das Risiko des Kontaktes oder der unmittelbaren Nähe zu Starkstromleitungen wird abgesehen von Warnhinweisen und Hinweisen in der Betriebsanleitung in dieser Norm nicht behandelt. Zu diesem Risiko müssen Prüfmethoden und Anforderungen erarbeitet werden.
Die Liste der signifikanten Gefährdungen, die Maßnahmen zur Verminderung des Risikos erfordern, ist im Anhang A enthalten.
Die Gefährdung der Umwelt wird in dieser Norm nicht in Betracht gezogen.
Dieser Teil der ISO 11680 gilt in erster Linie für Hochentaster, die nach dem Ausgabedatum der Norm hergestellt worden sind.

Matériel forestier - Exigences de sécurité et essais pour les perches élagueuses a moteur - Partie 1: Machines équipées d'un moteur a combustion interne intégré (ISO 11680-1:2000)

Stroji za gozdarstvo - Varnostne zahteve in preskušanje za motorne žage za obvejevanje z drogom - 1. del: Stroji z integriranim motorjem z notranjim zgorevanjem (ISO 11680-1:2000)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2001
• Withdrawal Date: 11-Mar-2009
• ICS: 65.060.80 - Forestry equipment
• Technical Committee: IMKG - Machinery for agriculture and forestry
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 24-Feb-2009
• Due Date: 19-Mar-2009
• Completion Date: 12-Mar-2009
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: EN ISO 11680-1:2000 - Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)

Relations

• Corrected By: SIST EN ISO 11680-1:2001/AC:2004 - Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)
• Effective Date: 22-Dec-2008
• Replaced By: SIST EN ISO 11680-1:2012 - Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:201
• Effective Date: 14-Dec-2011
• Replaced By: SIST EN ISO 11680-1:2009 - Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)
• Effective Date: 08-Jun-2022
• Corrected By: SIST EN ISO 11680-1:2001/AC:2004 - Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)
• Effective Date: 08-Jun-2022
• Replaced By: SIST EN ISO 11680-1:2009 - Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)
• Effective Date: 01-May-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11680-1:2001
01-december-2001
Stroji za gozdarstvo - Varnostne zahteve in preskušanje za motorne žage za
obvejevanje z drogom - 1. del: Stroji z integriranim motorjem z notranjim
zgorevanjem (ISO 11680-1:2000)
Machinery for forestry - Safety requirements and testing for pole-mounted powered
pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)
Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfung für motorbetriebene
Hochentaster - Teil 1: Geräte mit integriertem Verbrennungsmotor (ISO 11680-1:2000)
Matériel forestier - Exigences de sécurité et essais pour les perches élagueuses a
moteur - Partie 1: Machines équipées d'un moteur a combustion interne intégré (ISO
11680-1:2000)
Ta slovenski standard je istoveten z: EN ISO 11680-1:2000
ICS:
65.060.80 Gozdarska oprema Forestry equipment
SIST EN ISO 11680-1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11680-1:2001

---------------------- Page: 2 ----------------------

SIST EN ISO 11680-1:2001
EUROPEAN STANDARD
EN ISO 11680-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2000
ICS 65.060
English version
Machinery for forestry - Safety requirements and testing for pole-
mounted powered pruners - Part 1: Units fitted with an integral
combustion engine (ISO 11680-1:2000)
Matériel forestier - Exigences de sécurité et essais pour les Forstmaschinen - Sicherheitstechnische Anforderungen
perches élagueuses à moteur - Partie 1: Machines und Prüfung für motorbetriebene Hochentaster - Teil 1:
équipées d'un moteur à combustion interne intégré (ISO Geräte mit integriertem Verbrennungsmotor (ISO 11680-
11680-1:2000) 1:2000)
This European Standard was approved by CEN on 27 July 2000.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2000 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11680-1:2000 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11680-1:2001
Page 2
EN ISO 11680-1:2000
Foreword
Corrected 2001-09-05
The text of the International Standard ISO 11680-1:2000 has been prepared by Technical
Committee ISO/TC 23 "Tractors and machinery for agriculture and forestry" in collaboration
with Technical Committee CEN/TC 144 "Tractors and machinery for agriculture and forestry",
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by February 2001, and conflicting national
standards shall be withdrawn at the latest by February 2001.
This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements
of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of
this standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of the International Standard ISO 11680-1:2000 was approved by CEN as a
European Standard without any modification.
NOTE: Normative references to International Standards are listed in annex ZA (normative).

---------------------- Page: 4 ----------------------

SIST EN ISO 11680-1:2001
Page 3
EN ISO 11680-1:2000
Annex ZA
(normative)
Normative references to international publications with their relevant European
publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publicatio
...