iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60282-1:2001

(Main)

High-voltage fuses -- Part 1: Current-limiting fuses

High-voltage fuses -- Part 1: Current-limiting fuses

Applies to all types of high-voltage current-limiting fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz and of rated voltages exceeding 1 000 V. Note: -For the correct operation of the striker of the fuse-link in combination with the tripping device of the switching device, see EN 60420.

Hochspannungssicherungen -- Teil 1: Strombegrenzende Sicherungen

Fusibles à haute tension -- Partie 1: Fusibles limiteurs de courant

S'applique à tous les types de coupe-circuit à fusibles limiteurs de courant haute tension destinés à être utilisés à l'extérieur ou à l'intérieur sur des réseaux à courant alternatif 50 Hz et 60 Hz et dont les tensions nominales sont supérieures à 1 000 V. Note: - Pour le fonctionnement correct du percuteur de l'élément de remplacement lié au dispositif d'ouverture d'un appareil mécanique de connexion, voir la EN 60420.

High-voltage fuses - Part 1: Current-limiting fuses

General Information

Status
Withdrawn
Publication Date
31-Jan-2001
Withdrawal Date
29-Feb-2004
ICS
29.120.50 - Fuses and other overcurrent protection devices
Technical Committee
EVA - Fuses
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Mar-2004
Due Date
01-Mar-2004
Completion Date
01-Mar-2004
Ref Project
EN 60282-1:1996 - High-voltage fuses - Part 1: Current-limiting fuses

Relations

Amended By
SIST EN 60282-1:2001/A2:2001 - High-voltage fuses -- Part 1: Current-limiting fuses
Effective Date
29-Jan-2023
Amended By
SIST EN 60282-1:2001/A1:2001 - High-voltage fuses -- Part 1: Current-limiting fuses
Effective Date
21-Sep-2010
Amended By
SIST EN 60282-1:2001/A2:2001 - High-voltage fuses -- Part 1: Current-limiting fuses
Effective Date
21-Sep-2010
Replaced By
SIST EN 60282-1:2004 - High-voltage fuses -- Part 1: Current-limiting fuses
Effective Date
28-Jan-2023
Amended By
SIST EN 60282-1:2001/A1:2001 - High-voltage fuses -- Part 1: Current-limiting fuses
Effective Date
28-Jan-2023
Amended By
SIST EN 60282-1:2001/A1:2001 - High-voltage fuses -- Part 1: Current-limiting fuses
Effective Date
07-Jun-2022
Amended By
SIST EN 60282-1:2001/A2:2001 - High-voltage fuses -- Part 1: Current-limiting fuses
Effective Date
07-Jun-2022
Revised
SIST EN 60282-1:1995 - High-voltage fuses -- Part 1: Current-limiting fuses
Effective Date
13-May-2010
Replaces
SIST EN 60282-1:1995 - High-voltage fuses -- Part 1: Current-limiting fuses
Effective Date
07-Jun-2022

Buy Standard

EN 60282-1:2001EN 60282-1:2001
PreviousNext
Standard
EN 60282-1:2001
English language
92 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 60282-1:2001 - Manjkajo strani: 112, 114, 116, 118, 120.EN 60282-1:2001 - Manjkajo strani: 112, 114, 116, 118, 120.
PreviousNext
Standard
EN 60282-1:2001 - Manjkajo strani: 112, 114, 116, 118, 120.
English language
84 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60282-1:2001
01-februar-2001
Nadomešča:
SIST EN 60282-1:1995
High-voltage fuses - Part 1: Current-limiting fuses
High-voltage fuses -- Part 1: Current-limiting fuses
Hochspannungssicherungen -- Teil 1: Strombegrenzende Sicherungen
Fusibles à haute tension -- Partie 1: Fusibles limiteurs de courant
Ta slovenski standard je istoveten z: EN 60282-1:1996
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
SIST EN 60282-1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 2 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 3 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 4 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 5 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 6 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 7 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 8 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 9 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 10 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 11 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 12 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 13 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 14 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 15 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 16 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 17 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 18 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 19 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 20 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 21 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 22 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 23 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 24 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 25 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 26 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 27 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 28 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 29 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 30 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 31 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 32 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 33 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 34 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 35 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 36 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 37 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 38 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 39 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 40 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 41 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 42 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 43 ----------------------
SIST EN 60282-1:2001

---------------------- Page: 44 -----------
...

SLOVENSKI STANDARD
SIST EN 60282-1:2001
01-februar-2001
1DGRPHãþD
SIST EN 60282-1:1995
High-voltage fuses - Part 1: Current-limiting fuses
High-voltage fuses -- Part 1: Current-limiting fuses
Hochspannungssicherungen -- Teil 1: Strombegrenzende Sicherungen
Fusibles à haute tension -- Partie 1: Fusibles limiteurs de courant
Ta slovenski standard je istoveten z: EN 60282-1:1996
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
SIST EN 60282-1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 2 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 3 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 4 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 5 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 6 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 7 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 8 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 9 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 10 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 11 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 12 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 13 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 14 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 15 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 16 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 17 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 18 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 19 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 20 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 21 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 22 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 23 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 24 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 25 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 26 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 27 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 28 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 29 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 30 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 31 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 32 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 33 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 34 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 35 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 36 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 37 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 38 ----------------------

SIST EN 60282-1:2001

---------------------- Page: 39 ----------------------

SIST EN 60282-1:2001

-----------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST HD 60269-2:2013/A1:2023(Amendment)
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K (IEC 60269-2:2013/A1:2016)
HD 60269-2:2013/A1:2022

IEC 60269-2:2013 provides supplementary requirements for fuses for use by authorized persons and are generally designed to be used in installations where the fuse-links are accessible to, and may be replaced by, authorized persons only. Fuses for use by authorized persons according to the following fuse systems also comply with the requirements of the corresponding subclauses of IEC 60269-1, unless otherwise defined in this standard. This standard is divided into fuse systems, each dealing with a specific example of standardized fuses for use by authorized persons:  - Fuse system A: Fuses with fuse-links with blade contacts (NH fuse system),  - Fuse system B: Fuses with striker fuse-links with blade contacts (NH fuse system),  - Fuse system C: Fuse-rails (NH fuse system),  - Fuse system D: Fuse-bases for busbar mounting (NH fuse system),  - Fuse system E: Fuses with fuse-links for bolted connections (BS bolted fuse system),  - Fuse system F: Fuses with fuse-links having cylindrical contact caps (NF cylindrical fuse system),  - Fuse system G: Fuses with fuse-links with offset blade contacts (BS clip-in fuse system),  - Fuse system H: Fuses with fuse-links having 'gD' and 'gN' characteristic (class J and class time delay and non time delay fuse types),  - Fuse system I: gU fuse-links with wedge tightening contacts,  - Fuse system J: Fuses with fuse-links having 'gD class CC' and 'gN class CC' characteristics (class CC time delay and non-time delay fuse types),  - Fuse system K: gK fuse-links with blade for bolted connections - High fuse-link ratings from 1 250 A up to 4 800 A (master fuse-links). This fifth edition of IEC 60269-2 cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  1. fuse systems A and B: modified values for the power dissipation of NH aM fuse-links;  2. fuse systems A and B: introduction of dimension r for NH fuse-links;  3. addition of new fuse system K: gK fuse-links with contacts for bolted connections.   Key Words: fuse systems A to K,  requirements for fuses

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP IEC TR 60269-5:2022/AMD1:2023(Main)
Amendment 1 - Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
IEC TR 60269-5:2014/AMD1:2020
  • Technical report
    16 pages
    English language
    sale 15% off
  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60269-3:2010/A2:2023(Amendment)
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F (IEC 60269-3:2010/A2:2019)
HD 60269-3:2010/A2:2022

2018-05-14 PC: TC to finalize the finalize Annex ZA, ZZ and Risk assessment

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP IEC TR 60269-5:2022(Main)
Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
IEC TR 60269-5:2014

IEC/TR 60269-5:2014 serves as an application guide for low-voltage fuses, shows how current-limiting fuses are easy to apply to protect today's complex and sensitive electrical and electronic equipment. This guidance specifically covers low-voltage fuses up to 1 000 V a.c. and 1 500 V d.c. designed and manufactured in accordance with IEC 60269 series. This guidance provides important facts about as well as information on the application of fuses. This second edition cancels and replaces the first edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- recommendations for fuse operations in high altitudes added,
- more details for operational voltages added,
- recommendations for photovoltaic system protection added,
- numerous details improved Keywords: application guide for low-voltage fuses, current-limiting fuses

  • Technical report
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    116 pages
    English and French language
    sale 15% off
SIST
SIST EN IEC 60282-1:2020(Main)
High-voltage fuses - Part 1: Current-limiting fuses (IEC 60282-1:2020)
EN IEC 60282-1:2020

This part of IEC 60282 applies to all types of high-voltage current-limiting fuses designed for
use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz and of rated
voltages exceeding 1 000 V.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60282-4:2020(Main)
High-voltage fuses - Part 4: Additional testing requirements for high-voltage expulsion fuses utilizing polymeric insulators (IEC 60282-4:2020)
EN IEC 60282-4:2020

This part of IEC 60282 applies to expulsion fuses complying with IEC 60282-2 and specifies
additional testing requirements for fuses employing a cutout fuse-base that utilizes polymeric
insulators.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60127-3:2015/A1:2020(Amendment)
Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-3:2015/A1:2020
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60644:2010/A1:2020(Amendment)
Specification for high-voltage fuse-links for motor circuit applications (IEC 60644:2009/A1:2019)
EN 60644:2009/A1:2019
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60691:2017/A1:2019(Amendment)
Thermal-links - Requirements and application guide (IEC 60691:2015/A1:2019)
EN 60691:2016/A1:2019

"Compliant" assessment received on 2018-07-20
The project can be published and offered for its citation in the OJEU.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60127-8:2019(Main)
Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection (IEC 60127-8:2018)
EN IEC 60127-8:2018

This part of IEC 60127 relates to fuse resistors with particular overcurrent protection rated up
to AC 500 V and/or DC 500 V for printed circuits and other substrate systems, used for the
protection of electric appliances, electronic equipment and component parts thereof, normally
intended to be used indoors.
It does not apply to fuse resistors with particular overcurrent protection for appliances
intended to be used under special conditions, such as in a corrosive or explosive atmosphere.
The object of this part of IEC 60127 is
a) to establish uniform requirements for fuse resistors with particular overcurrent protection
so as to protect appliances or parts of appliances in the most suitable way;
b) to define the performance of the fuse resistors with particular overcurrent protection, so as
to give guidance to manufacturers of electrical appliances and electronic equipment and to
ensure replacement of fuse resistors with particular overcurrent protection by those of
similar dimensions and characteristics;
c) to establish uniform test methods for fuse resistors with particular overcurrent protection,
so as to allow verification of the values (for example rated dissipation, functioning
characteristic and rated breaking capacity values) specified by the manufacturer.
Manufacturers of fuse resistors with particular overcurrent protection shall ensure on their
own responsibility that their products comply with the requirements of the resistor-related
standards IEC 60115-1, IEC 60115-4-101 and IEC 60115-4-1021.
This part of IEC 60127 applies in addition to the requirements of IEC 60127-1.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day