SIST EN 822:2013
(Main)Thermal insulating products for building applications - Determination of length and width
Thermal insulating products for building applications - Determination of length and width
This European Standard specifies the equipment and procedures for determining the thickness of full-size products. It is applicable to thermal insulating products.
Wärmedämmstoffe für das Bauwesen - Bestimmung der Länge und Breite
Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung der Länge und Breite von Produkten in Liefermaßen fest. Sie gilt für Wärmedämmstoffe.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la longueur et de la largeur
La présente Norme européenne spécifie l'équipement et les modes opératoires permettant de déterminer la longueur et la largeur des produits en vraies dimensions. Elle s’applique aux produits isolants thermiques.
Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje širine in dolžine
Ta evropski standard določa opremo in postopke za ugotavljanje debeline izdelkov naravne velikosti. Uporablja se za toplotnoizolacijske proizvode.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 822:2013
01-julij-2013
1DGRPHãþD
SIST EN 822:1997
Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje širine in
dolžine
Thermal insulating products for building applications - Determination of length and width
Wärmedämmstoffe für das Bauwesen - Bestimmung der Länge und Breite
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la
longueur et de la largeur
Ta slovenski standard je istoveten z: EN 822:2013
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN 822:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 822:2013
---------------------- Page: 2 ----------------------
SIST EN 822:2013
EUROPEAN STANDARD
EN 822
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2013
ICS 91.100.60 Supersedes EN 822:1994
English Version
Thermal insulating products for building applications -
Determination of length and width
Produits isolants thermiques destinés aux applications du Wärmedämmstoffe für das Bauwesen - Bestimmung der
bâtiment - Détermination de la longueur et de la largeur Länge und Breite
This European Standard was approved by CEN on 15 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 822:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 822:2013
EN 822:2013 (E)
Contents Page
Foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle. 5
5 Apparatus . 5
6 Test specimens . 5
7 Procedure . 6
8 Calculation and expression of results . 7
9 Accuracy of measurement . 7
10 Test report . 7
2
---------------------- Page: 4 ----------------------
SIST EN 822:2013
EN 822:2013 (E)
Foreword
This document (EN 822:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating
materials and products”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2013, and conflicting national standards shall be
withdrawn at the latest by September 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 822:1994.
The revision of this standard contains no major changes, only minor corrections and clarifications of an
editorial nature.
This European Standard is one of a series of standards which specify test methods for determining
dimensions and properties of thermal insulating materials and products. It supports a series of product
standards for thermal insulating materials and products which derive from the Council Directive of
21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member
States relating to construction products (89/106/EEC) through the consideration of the essential requirements.
This European Standard has been drafted for applications in building but it may also be used in other areas
where it is relevant.
This European test standard is one of the following group of interrelated standards on test methods for
determining dimensions and properties of thermal insulation materials and products, all of which fall within the
scope of CEN/TC 88:
EN 822, Thermal insulating products for building applications — Determination of length and width
EN 823, Thermal insulating products for building applications — Determination of thickness
EN 824, Thermal insulating products for building applications — Determination of squareness
EN 825, Thermal insulating products for building applications — Determination of flatness
EN 826, Thermal insulating products for building applications — Determination of compression behaviour
EN 1602, Thermal insulating products for building applications — Determination of the apparent density
EN 1603, Thermal insulating products for building applications — Determination of dimensional stability
under constant normal laboratory conditions (23 °C/50 % relative humidity)
EN 1604, Thermal insulating products for building applications — Determination of dimensional stability
under specified temp
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje širine in dolžineWärmedämmstoffe für das Bauwesen - Bestimmung der Länge und BreiteProduits isolants thermiques destinés aux applications du bâtiment - Détermination de la longueur et de la largeurThermal insulating products for building applications - Determination of length and width91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:FprEN 822kSIST FprEN 822:2012en,fr,de01-september-2012kSIST FprEN 822:2012SLOVENSKI
STANDARD
kSIST FprEN 822:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 822
June 2012 ICS 91.100.60 Will supersede EN 822:1994English Version
Thermal insulating products for building applications - Determination of length and width
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la longueur et de la largeur
Wärmedämmstoffe für das Bauwesen - Bestimmung der Länge und Breite This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 88.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 822:2012: EkSIST FprEN 822:2012
FprEN 822:2012 (E) 2 Contents Page Foreword .31Scope .52Normative references .53Terms and definitions .54Principle .55Apparatus .56Test specimens .57Procedure .68Calculation and expression of results .69Accuracy of measurement .610Test report .7 kSIST FprEN 822:2012
FprEN 822:2012 (E) 3 Foreword This document (FprEN 822:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 822:1994.
The revision of this standard contains no major changes only minor corrections and clarifications of editorial nature.
This European Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in building but it may also be used in other areas where it is relevant. This EN test standard is one of the following group of interrelated standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which come within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications — Determination of length and width EN 823, Thermal insulating products for building applications — Determination of thickness EN 824, Thermal insulating products for building applications — Determination of squareness EN 825, Thermal insulating products for building applications — Determination of flatness EN 826, Thermal insulating products for building applications — Determination of compression behaviour EN 1602, Thermal insulating products for building applications — Determination of the apparent density EN 1603, Thermal insulating products for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.