oSIST prEN ISO 13628-1:2024

Oil and gas industries including low carbon energy - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO/DIS 13628-1:2023)

ISO 13628-1:2005 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment. ISO 13628-1:2005 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard. The complete subsea production system comprises several subsystems necessary to produce hydrocarbons from one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floating or subsea) or onshore, or to inject water/gas through subsea wells. ISO 13628-1:2005 and its related subsystem standards apply as far as the interface limits described in Clause 4. Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are not specifically discussed because of their limited use. However, the information presented is applicable to those types of equipment.

Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger - Auslegung und Betrieb von Unterwasser-Fördersystemen - Teil 1: Allgemeine Anforderungen und Empfehlungen (ISO/DIS 13628-1:2023)

Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone - Conception et exploitation des systèmes de production immergés - Partie 1: Exigences générales et recommandations (ISO/DIS 13628-1:2023)

L'ISO 13628-1:2005 fournit des exigences générales et des recommandations pour le développement de systèmes de production immergés complets, de la phase de conception jusqu'au démantèlement et à l'abandon. L'ISO 13628-1:2005 est un document cadre régissant les autres parties de l'ISO 13628 qui traitent de manière plus détaillée des exigences relatives aux sous-systèmes faisant généralement partie d'un système de production immergé. Néanmoins, dans certains domaines (par exemple, conception du système, structures, manifolds, dispositifs de levage, couleur et marquage), des exigences plus détaillées sont incluses dans la présente norme, car ces sujets ne sont pas couverts par une norme de sous-système. Le système de production immergé complet comprend plusieurs sous-systèmes nécessaires pour produire des hydrocarbures à partir d'un ou plusieurs puits sous-marins et les transférer vers une installation de traitement donnée située en mer (fixe, flottante ou immergée) ou à terre, ou pour injecter de l'eau/du gaz dans les puits sous-marins. L'ISO 13628-1:2005 et les normes de sous-systèmes connexes, s'appliquent jusqu'aux limites d'interface décrites à l'Article 4. Les équipements spéciaux, tels que les «split trees», les têtes de production et les manifolds des chambres atmosphériques, ne sont pas spécifiquement décrits du fait de leur usage limité. Toutefois, les informations fournies sont applicables à ces types d'équipement.

Naftna in plinska industrija, vključno z nizkoogljično energijo - Načrtovanje in upravljanje proizvodnje v podmorskih sistemih - 1. del: Splošne zahteve in priporočila (ISO/DIS 13628-1:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 26-Feb-2024
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 03-Jan-2024
• Due Date: 22-May-2024
• Ref Project: prEN ISO 13628-1 - Oil and gas industries including low carbon energy - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO/DIS 13628-1:2023)

Relations

• Revises: SIST EN ISO 13628-1:2006 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:2005)
• Effective Date: 11-Oct-2023
• Revises: SIST EN ISO 13628-1:2006/A1:2014 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations - Amendment 1: Revised Clause 6 (ISO 13628-1:2005/Amd 1:2010)
• Effective Date: 11-Oct-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 13628-1:2024
01-februar-2024
Naftna in plinska industrija, vključno z nizkoogljično energijo - Načrtovanje in
upravljanje proizvodnje v podmorskih sistemih - 1. del: Splošne zahteve in
priporočila (ISO/DIS 13628-1:2023)
Oil and gas industries including low carbon energy - Design and operation of subsea
production systems - Part 1: General requirements and recommendations (ISO/DIS
13628-1:2023)
Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger - Auslegung und
Betrieb von Unterwasser-Fördersystemen - Teil 1: Allgemeine Anforderungen und
Empfehlungen (ISO/DIS 13628-1:2023)
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone -
Conception et exploitation des systèmes de production immergés - Partie 1: Exigences
générales et recommandations (ISO/DIS 13628-1:2023)
Ta slovenski standard je istoveten z: prEN ISO 13628-1
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
oSIST prEN ISO 13628-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13628-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 13628-1:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13628-1
ISO/TC 67/SC 4 Secretariat: ANSI
Voting begins on: Voting terminates on:
2023-12-06 2024-02-28
Oil and gas industries including low carbon energy —
Design and operation of subsea production systems —
Part 1:
General requirements and recommendations
ICS: 75.180.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 13628-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 13628-1:2024
ISO/DIS 13628-1:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13628-1
ISO/TC 67/SC 4 Secretariat: ANSI
Voting begins on: Voting terminates on:

Oil and gas industries including low carbon energy —
Design and operation of subsea production systems —
Part 1:
General requirements and recommendations
ICS: 75.180.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 13628-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 13628-1:2024
ISO/DIS 13628-1:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope .
...