SIST EN 140401-804:2011/AC:2012

Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25

Various parameters of this component are precisely specified in this specification. Unspecified parameters may vary from one component to another. The following combinations of temperature coefficient, tolerance on rated resistance shall be used for qualification approval according to 2.2.1 and quality conformance inspection according to 2.3. Resistance values of E-series according to IEC 60063 shall be used. The qualification of resistance values below or beyond the specified resistance values is permitted, if they fulfill the requirements of the closest stability class.

Bauartspezifikation: SMD Schicht-Festwiderstände niedriger Belastbarkeit mit hoher Stabilität - Rechteckig - Stabilitätsklassen 0,1; 0,25

Spécification particulière: Résistances fixes à couche de haute stabilité et à faible dissipation CMS - Rectangulaires - Catégories de stabilité 0,1; 0,25

Podrobna specifikacija: Zelo stabilni fiksni plastni upori majhnih moči za površinsko montažo (SMD) - Pravokotni - Razreda stabilnosti 0,1 in 0,25

Različni parametri tega sestavnega dela so natančno opisani v tej specifikaciji. Nedoločeni parametri se lahko razlikujejo med sestavnimi deli. Naslednje kombinacije temperaturnega koeficienta in tolerance nazivne upornosti se uporabljajo za odobritev kvalifikacije v skladu s točko 2.2.1 ter prevzemno kontrolo v skladu s točko 2.3. Uporabljajo se vrednosti upornosti serije E v skladu s standardom IEC 60063. Dovoljena je kvalifikacija vrednosti upornosti pod ali nad določenimi vrednostmi, če izpolnjujejo zahteve najbližjega razreda stabilnosti.

General Information

• Status: Withdrawn
• Publication Date: 16-Jan-2012
• Withdrawal Date: 08-May-2023
• ICS: 31.040.10 - Fixed resistors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 09-May-2023
• Due Date: 01-Jun-2023
• Completion Date: 09-May-2023
• Ref Project: EN 140401-804:2011/AC:2011 - Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25

Relations

• Amends: SIST EN 140401-804:2011 - Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25
• Effective Date: 01-Mar-2012
• Revised: SIST EN 140401-804:2011/AC:2012 - Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25
• Effective Date: 06-May-2014
• Corrects: SIST EN 140401-804:2011 - Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25
• Effective Date: 28-Feb-2012
• Replaced By: SIST EN 140401-804:2011/AC:2012 - Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25
• Effective Date: 29-May-2012
• Replaced By: SIST EN 140401-804:2011/AC:2012 - Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25
• Effective Date: 29-Jan-2023
• Corrects: SIST EN 140401-804:2011 - Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25
• Effective Date: 29-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bauartspezifikation: SMD Schicht-Festwiderstände niedriger Belastbarkeit mit hoher Stabilität - Rechteckig - Stabilitätsklassen 0,1; 0,25Spécification particulière: Résistances fixes à couche de haute stabilité et à faible dissipation CMS - Rectangulaires - Catégories de stabilité 0,1; 0,25Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,2531.040.10Fiksni uporFixed resistorsICS:Ta slovenski standard je istoveten z:EN 140401-804:2011/AC:2011SIST EN 140401-804:2011/AC:2012en01-marec-2012SIST EN 140401-804:2011/AC:2012SLOVENSKI
STANDARD



SIST EN 140401-804:2011/AC:2012



Corrigendum to EN 140401-804:2011 English version ___________ Header block In 2nd row, left field, replace the reference to EN 60115-1:201X by: EN 60115-1:2011. In 2nd row, right field, replace the issue date (month) 201X by: June 2011. Clause 1.3.1 In 2nd paragraph, 2nd line, replace the resistance value 500 kΩ by: 499 kΩ. Table 3a For style RR1608M, tolerance ±1 %, temperature coefficient ±25 ppm/K, stability class 0,25, replace the upper resistance range limit 500 kΩ by: 499 kΩ. Table 3b For style RR1608M, tolerance ±1 %, temperature coefficient ±25 ppm/K, stability class 0,25, replace the upper resistance range limit 500 kΩ by: 499 kΩ. Table 4 Replace the table title by: Table 4 – Temperature coefficients and limits of resistance change Table 7a In three column headers, replace the reference to EN 60115-1:201X by: EN 60115-1:2011. SIST EN 140401-804:2011/AC:2012



Table 7b In four column headers, replace the reference to EN 60115-1:201X by: EN 60115-1:2011. Clause 1.9.1 In 3rd paragraph, 2nd line, replace the reference to
...