SIST EN 61850-7-3:2011

Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes (IEC 61850-7-3:2010)

This part of IEC 61850 specifies constructed attribute classes and common data classes related to substation applications. In particular, it specifies:
• common data classes for status information,
• common data classes for measured information,
• common data classes for control,
• common data classes for status settings,
• common data classes for analogue settings and
• attribute types used in these common data classes.
This International Standard is applicable to the description of device models and functions of substations and feeder equipment.
This International Standard may also be applied, for example, to describe device models and
functions for:
• substation to substation information exchange,
• substation to control centre information exchange,
• power plant to control centre information exchange,
• information exchange for distributed generation, or
• information exchange for metering.

Kommunikationsnetze und -systeme für die Automatisierung in der elektrischen Energieversorgung - Teil 7-3: Grundlegende Kommunikationsstruktur - Gemeinsame Datenklassen (IEC 61850-7-3:2010)

Réseaux et systèmes de communication pour l'automatisation des systèmes électriques - Partie 7-3: Structure de communication de base - Classes de données communes (CEI 61850-7-3:2010)

La CEI 61850-7-3:2010 est applicable à la description des modèles et fonctions de dispositifs pour les postes et les lignes d'alimentation. Elle spécifie les classes d'attributs construites et les classes de données communes liées à des applications de poste. En particulier, elle spécifie les classes de données communes pour les informations relatives au statut, les classes de données communes pour les informations mesurées, les classes de données communes pour le contrôle, les classes de données communes pour les réglages de statut, les classes de données communes pour les réglages analogiques, et les types d'attribut utilisés dans ces classes de données communes. Cette deuxième édition définit de nouvelles classes de données communes utilisées pour de nouvelles normes définissant des modèles d'objets pour d'autres domaines reposant sur la CEI 61850 et pour la représentation des données statistiques et historiques.

Komunikacijska omrežja in sistemi za avtomatizacijo porabe električne energije - 7-3. del: Osnovna komunikacijska struktura - Skupni podatkovni razredi (IEC 61850-7-3:2010)

Ta del IEC 61850 določa zgrajene razrede lastnosti in skupne podatkovne razrede, povezane z uporabami v podpostajah. Zlasti določa:
• skupne podatkovne razrede za statusne informacije;
• skupne podatkovne razrede za merjene informacije;
• skupne podatkovne razrede za nadzor;
• skupne podatkovne razrede za statusne nastavitve;
• skupne podatkovne razrede za analogne nastavitve in
Ta mednarodni standard velja za opisovanje modelov naprav in funkcij podpostaj ter opreme za podajanje.
Ta mednarodni standard prav tako lahko velja za, na primer, opisovanje modelov za naprave in funkcije za:
• izmenjavo informacij od podpostaje do podpostaje;
• izmenjavo informacij od podpostaje do podpostaje;
• izmenjavo informacij od elektrarne do nadzornega centra;
• izmenjavo informacij za porazdeljeno proizvodnjo ali izmenjavo informacij za merjenje.

General Information

• Status: Published
• Publication Date: 20-Mar-2011
• ICS: 29.240.30 - Control equipment for electric power systems
• ICS: 33.200 - Telecontrol. Telemetering
• Technical Committee: PSE - Power systems management
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-Mar-2011
• Due Date: 19-May-2011
• Completion Date: 21-Mar-2011
• Ref Project: EN 61850-7-3:2011 - Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes

Relations

• Replaces: SIST EN 61850-7-3:2004 - Communication networks and systems in substations -- Part 7-3: Basic communication structure for substation and feeder equipment - Common data classes
• Effective Date: 01-May-2011
• Replaces: SIST EN 61850-7-3:2004 - Communication networks and systems in substations -- Part 7-3: Basic communication structure for substation and feeder equipment - Common data classes
• Effective Date: 28-Jan-2023
• Revised: SIST EN 61850-7-3:2004 - Communication networks and systems in substations -- Part 7-3: Basic communication structure for substation and feeder equipment - Common data classes
• Effective Date: 21-Jan-2014
• Amended By: SIST EN 61850-7-3:2011/A1:2020 - Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes
• Effective Date: 01-May-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61850-7-3:2011
01-maj-2011
1DGRPHãþD
SIST EN 61850-7-3:2004
.RPXQLNDFLMVNDRPUHåMDLQVLVWHPL]DDYWRPDWL]DFLMRSRUDEHHOHNWULþQHHQHUJLMH
GHO2VQRYQDNRPXQLNDFLMVNDVWUXNWXUD6NXSQLSRGDWNRYQLUD]UHGL,(&

Communication networks and systems for power utility automation - Part 7-3: Basic
communication structure - Common data classes (IEC 61850-7-3:2010)
Kommunikationsnetze und -systeme für die Automatisierung in der elektrischen
Energieversorgung - Teil 7-3: Grundlegende Kommunikationsstruktur - Gemeinsame
Datenklassen (IEC 61850-7-3:2010)
Réseaux et systèmes de communication pour l'automatisation des systèmes électriques
- Partie 7-3: Structure de communication de base - Classes de données communes (CEI
61850-7-3:2010)
Ta slovenski standard je istoveten z: EN 61850-7-3:2011
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
SIST EN 61850-7-3:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61850-7-3:2011

---------------------- Page: 2 ----------------------

SIST EN 61850-7-3:2011

EUROPEAN STANDARD
EN 61850-7-3

NORME EUROPÉENNE
February 2011
EUROPÄISCHE NORM

ICS 33.200 Supersedes EN 61850-7-3:2003


English version


Communication networks and systems for power utility automation -
Part 7-3: Basic communication structure -
Common data classes
(IEC 61850-7-3:2010)


Réseaux et systèmes de communication Kommunikationsnetze und -systeme für
pour l'automatisation des systèmes die Automatisierung in der elektrischen
électriques - Energieversorgung -
Partie 7-3: Structure de communication de Teil 7-3: Grundlegende
base - Kommunikationsstruktur -
Classes de données communes Gemeinsame Datenklassen
(CEI 61850-7-3:2010) (IEC 61850-7-3:2010)




This European Standard was approved by CENELEC on 2011-01-20. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61850-7-3:2011 E

---------------------- Page: 3 ----------------------

SIST EN 61850-7-3:2011
EN 61850-7-3:2011 - 2 -
Foreword
The text of document 57/1087/FDIS, future edition 2 of IEC 61850-7-3, prepared by IEC TC 57, Power
systems management and associated information exchange, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61850-7-3 on 2010-12-07.
This European Standard supersedes EN 61850-7-3:2003.
Compared to EN 61850-7-3:2003, this edition:
– defines new common data classes used for new standards defining object models for other domains
based on EN 61850 and for the representation of statistical and historical data;
– provides clarifications and corrections to EN 61850-7-3:2003.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-09-07
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-12-07
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61850-7-3:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61850-8 series NOTE  Harmonized in EN 61850-8 series (not modified).
IEC 61850-9 series NOTE  Harmonized EN 61850-9 series (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 61850-7-3:2011
- 3 - EN 61850-7-3:2011
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC/TS 61850-2 - Communication networks and systems in - -
substations -
Part 2: Glossary


IEC 61850-7-1 - Communication networks and systems in EN 61850-7-1 -
substations -
Part 7-1: Basic communication structure for
substation and feeder equipment - Principles
and models


IEC 61850-7-2 - Communication networks and systems for EN 61850-7-2 -
power utility automation -
Part 7-2: Basic information and
communication structure - Abstract
communication service interface (ACSI)


IEC 61850-7-4 - Communication networks and systems for EN 61850-7-4 -
power utility automation -
Part 7-4: Basic communication structure -
Compatible logical node classes and data
object classes


ISO 4217 - Codes for the representation of currencies - -
and funds


IEEE C37.118 2005 IEEE Standard for Synchrophasors for Power - -
Systems

---------------------- Page: 5 ----------------------

SIST EN 61850-7-3:2011

---------------------- Page: 6 ----------------------

SIST EN 61850-7-3:2011

IEC 61850-7-3
®
Edition 2.0 2010-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside


Communication networks and systems for power utility automation –
Part 7-3: Basic communication structure – Common data classes

Réseaux et systèmes de communication pour l'automatisation des systèmes
électriques –
Partie 7-3: Structure de communication de base – Classes de données
communes

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XD
CODE PRIX
ICS 33.200 ISBN 978-2-88912-258-5
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61850-7-3:2011
– 2 – 61850-7-3 Ó IEC:2010
CONTENTS
FOREW ORD . 6
INTRODUCTION . 8
1 Sc o pe . 9
2 Normative references . 9
3 Terms and definitions . 10
4 Abbreviated terms . 10
5 Conditions for attribute inclusion . 10
6 Constructed attribute classes . 11
6.1 General . 11
6.2 Quality . 11
6.2.1 Ov erv iew . 11
6.2.2 Validity . 12
6.2.3 Detail quality . 13
6.2.4 Source . 14
6.2.5 Test . 14
6.2.6 Frozen by operator . 14
6.2.7 Quality in the client server context . 15
6.2.8 Relation between quality identifiers . 16
6.3 Analogue value . 18
6.4 Configuration of analogue value . 18
6.5 Range configuration . 19
6.6 Step position with transient indication. 19
6.7 Pulse configuration. 20
6.8 Originator . 20
6.9 Unit definition . 21
6.10 Vector definition . 21
6.11 Point definition . 22
6.12 CtlModels definition . 22
6.13 SboClasses definition . 22
6.14 Cell. 22
6.15 CalendarTime definition . 23
7 Common data class specifications . 25
7.1 General . 25
7.2 Name spaces . 25
7.3 Common data class specifications for status information . 25
7.3.1 Application of services . 25
7.3.2 Single point status (SPS) . 26
7.3.3 Double point status (DPS) . 27
7.3.4 Integer status (INS) . 27
7.3.5 Enumerated status (ENS). 28
7.3.6 Protection activation information (ACT) . 28
7.3.7 Directional protection activation information (ACD) . 29
7.3.8 Security violation counting (SEC) . 30
7.3.9 Binary counter reading (BCR) . 30
7.3.10 Histogram (HST) . 31

---------------------- Page: 8 ----------------------

SIST EN 61850-7-3:2011
61850-7-3 Ó IEC:2010 – 3 –
7.3.11 Visible string status (VSS). 31
7.4 Common data class specifications for measurand information . 32
7.4.1 Application of services . 32
7.4.2 Measured value (MV) . 33
7.4.3 Complex measured value (CMV) . 34
7.4.4 Sampled value (SAV) . 35
7.4.5 Phase to ground/neutral related measured values of a three-phase
system (WYE) . 36
7.4.6 Phase to phase related measured values of a three-phase system
(DEL) . 37
7.4.7 Sequence (SEQ) . 38
7.4.8 Harmonic value (HMV) . 39
7.4.9 Harmonic value for WYE (HWYE) . 40
7.4.10 Harmonic value for DEL (HDEL) . 41
7.5 Common data class specifications for controls . 42
7.5.1 Application of services . 42
7.5.2 Controllable single point (SPC) . 43
7.5.3 Controllable double point (DPC) . 44
7.5.4 Controllable integer status (INC) . 45
7.5.5 Controllable enumerated status (ENC) . 46
7.5.6 Binary controlled step position information (BSC) . 47
7.5.7 Integer controlled step position information (ISC) . 48
7.5.8 Controllable analogue process value (APC) . 49
7.5.9 Binary controlled analog process value (BAC) . 50
7.6 Common data class specifications for status settings . 51
7.6.1 Application of services . 51
7.6.2 Single point setting (SPG) . 51
7.6.3 Integer status setting (ING) . 52
7.6.4 Enumerated status setting (ENG) . 52
7.6.5 Object reference setting (ORG) . 53
7.6.6 Time setting group (TSG) . 53
7.6.7 Currency setting group (CUG) . 54
7.6.8 Visible string setting (VSG) . 54
7.7 Common data class specifications for analogue settings . 55
7.7.1 Application of services . 55
7.7.2 Analogue setting (ASG) . 56
7.7.3 Setting curve (CURVE) . 57
7.7.4 Curve shape setting (CSG) . 58
7.8 Common data class specifications for description information . 59
7.8.1 Application of services . 59
7.8.2 Device name plate (DPL) . 60
7.8.3 Logical node name plate (LPL) . 61
7.8.4 Curve shape description (CSD). 62
8 Data attribute semantic . 63
Annex A (normative) Value range for units and multiplier . 78
Annex B (informative) Functional constraints . 81
Annex C (normative) Tracking of configuration revisions . 83
Annex D (normative) SCL enumerations . 84

---------------------- Page: 9 ----------------------

SIST EN 61850-7-3:2011
– 4 – 61850-7-3 Ó IEC:2010
Bibliography . 90

Figure 1 – Quality identifiers in a single client-server relationship . 15
Figure 2 – Quality identifiers in a multiple client-server relationship . 15
Figure 3 – Interaction of substitution and validity . 17
Figure 4 – Configuration of command output pulse . 20
Figure 5 – Cell definition . 23
Figure 6 – Two-dimensional curve represented by CSG . 58
Figure 7 – Two-dimensional shape created by multiple CSG . 59

Table 1 – Conditions for presence of attributes . 10
Table 2 – Quality . 12
Table 3 – Relation of the detailed quality identifiers with invalid or questionable quality . 13
Table 4 – Analogue value . 18
Table 5 – Configuration of analogue value . 18
Table 6 – Range configuration . 19
Table 7 – Step position with transient indication . 19
Table 8 – Pulse configuration . 20
Table 9 – Originator . 21
Table 10 – Values for orCat . 21
Table 11 – Unit . 21
Table 12 – Vector . 21
Table 13 – Point . 22
Table 14 – Cell . 23
Table 15 – CalendarTime . 24
Table 16 – Semantic interpretation of calendar time settings . 24
Table 17 – Name space attributes . 25
Table 18 – Basic status information template. 26
Table 19 – Single point status common data class definition . 26
Table 20 – Double point status common data class specification . 27
Table 21 – Integer status common data class specification . 27
Table 22 – Enumerated status common data class specification . 28
Table 23 – Protection activation information common data class specification. 28
Table 24 – Directional protection activation information common data class
specification. 29
Table 25 – Security violation counting common data class specification . 30
Table 26 – Binary counter reading common data class specification . 30
Table 27 – Histogram common data class specification . 31
Table 28 – Visible string status common data class definition . 31
Table 29 – Basic measurand information template . 32
Table 30 – Measured value . 33
Table 31 – Complex measured value . 34
Table 32 – Sampled value . 35

---------------------- Page: 10 ----------------------

SIST EN 61850-7-3:2011
61850-7-3 Ó IEC:2010 – 5 –
Table 33 – WYE . 36
Table 34 – Delta . 37
Table 35 – Sequence . 38
Table 36 – Harmonic value . 39
Table 37 – Harmonic values for WYE . 40
Table 38 – Harmonic values for delta. 41
Table 39 – Basic controllable status information template . 42
Table 40 – Controllable single point. 43
Table 41 – Controllable double point . 44
Table 42 – Controllable integer status . 45
Table 43 – Controllable enumerated status . 46
Table 44 – Binary controlled step position information . 47
Table 45 – Integer controlled step position information . 48
Table 46 – Controllable analogue process value . 49
Table 47 – Binary controlled analog process value . 50
Table 48 – Basic status setting template . 51
Table 49 – Single point setting . 51
Table 50 – Integer status setting . 52
Table 51 – Enumerated status setting . 52
Table 52 – Object reference setting common data class specification . 53
Table 53 – Time setting group common data class specification . 53
Table 54 – Currency setting group common data class specification . 54
Table 55 – Visible string setting group common data class specification . 54
Table 56 – Basic analogue setting template . 55
Table 57 – Analogue setting . 56
Table 58 – Setting curve . 57
Table 59 – Curve shape setting. 58
Table 60 – Basic description information template . 59
Table 61 – Device name plate common data class specification . 60
Table 62 – Logical node name plate common data class specification . 61
Table 63 – Curve shape description common data class specification . 62
Table 64 – Semantics of data attributes and data. 63
Table A.1 – SI units: base units . 78
Table A.2 – SI units: derived units . 78
Table A.3 – SI units: extended units . 79
Table A.4 – SI units: industry specific units . 79
Table A.5 – Multiplier . 80
Table B.1 – Functional constraints . 82

---------------------- Page: 11 ----------------------

SIST EN 61850-7-3:2011
– 6 – 61850-7-3 Ó IEC:2010
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

COMMUNICATION NETWORKS AND
SYSTEMS FOR POWER UTILITY AUTOMATION –

Part 7-3: Basic communication structure –
Common data classes


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried o
...