Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of properties of black powder

This document specifies the test methods for black powder in pellets, granular form, compressed (press-moulded cylinders with central hollow space) or as a meal for use as propellant, blasting explosive, pyrotechnic or in safety fuses.

Explosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 7: Bestimmung der Eigenschaften von Schwarzpulver

Dieses Dokument legt Prüfverfahren für Schwarzpulver in Pellet-, Granulat-, gepresster (formgepresste Zylinder mit zentralem Hohlraum) oder Pulverform zur Verwendung als Treibmittel, Sprengstoff, in der Pyrotechnik oder in Sicherheitsanzündschnüren fest.

Explosifs a usage civil - Poudre propulsive et propergol pour fusée - Détermination des propriétés de la poudre noire

La présente Norme européenne spécifie les méthodes d'essai pour la poudre noire en granulats, en granulés, ou comprimée (cylindres moulés pour pressage avec un espace creux central), ou en tant que composant principal de poudre propulsive, d'explosif de minage, de meche pyrotechnique ou de meches de sureté.

Eksplozivi za civilno uporabo - Smodniki in raketna goriva - 7. del: Določanje lastnosti črnega smodnika

General Information

Status
Published
Publication Date
31-Oct-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Nov-2004
Due Date
01-Nov-2004
Completion Date
01-Nov-2004

Relations

Buy Standard

Standard
EN 13938-7:2004
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of properties of black powderExplosifs a usage civil - Poudre propulsive et propergol pour fusée - Détermination des propriétés de la poudre noireExplosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 7: Bestimmung der Eigenschaften von SchwarzpulverTa slovenski standard je istoveten z:EN 13938-7:2004SIST EN 13938-7:2004en71.100.30ICS:SLOVENSKI
STANDARDSIST EN 13938-7:200401-november-2004







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13938-7August 2004ICS 71.100.30English versionExplosives for civil uses - Propellants and rocket propellants -Part 7: Determination of properties of black powderExplosifs à usage civil - Poudre propulsive et propergolpour fusée - Détermination des propriétés de la poudrenoireExplosivstoffe für zivile Zwecke - Treibladungspulver undRaketentreibstoffe - Teil 7: Bestimmung der Eigenschaftenvon SchwarzpulverThis European Standard was approved by CEN on 21 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13938-7:2004: E



EN 13938-7:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Preparation of test samples.4 5 Methods for black powder.5 5.1 Methods for black powder used as propellant, pyrotechnic or in safety fuses.5 5.2 Methods for black powder for blasting.6 6 Test report.7 Annex A (informative)
Range of applicability of test methods.9 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 93/15/EEC.10 Bibliography.11



EN 13938-7:2004 (E) 3 Foreword This document (EN 13938-7:2004) has been prepared by Technical Committee CEN/TC 321 "Explosives for civil uses", the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2005, and conflicting national standards shall be withdrawn at the latest by February 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document is one of a series of standards with the generic title Explosives for civil uses – Propellants and rocket propellants. The other parts of this series are listed below: prEN 13938-1 Part 1: Requirements prEN 13938-2 Part 2: Determination of resistance to electrostatic energy EN 13938-3 Part 3: Determination of deflagration to detonation transition EN 13938-4 Part 4: Determination of burning rate under ambient conditions EN 13938-5 Part 5: Determination of voids and fissures EN 13938-6 Part 6: Guide for the determination of integrity of inhibitor coatings According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 13938-7:2004 (E) 4
1 Scope This document specifies the test methods for black powder in pellets, granular form, compressed (press-moulded cylinders with central hollow space) or as a meal for use as propellant, blasting explosive, pyrotechnic or in safety fuses. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13631-2, Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives EN 13631-3, Explosives for civil uses - High explosives - Part 3: Determination of sensitiveness to friction of explosives. EN 13631-4, Explosives for civil uses - High explosives - Part 4: Determination of sensitiveness to impact of explosives EN 13857-1:2003, Explosives for civil uses - Part 1: Terminology EN 13938-4, Explosives for civil uses - Propellants and rocket propellants - Part 4: Determination of burning rate under ambient conditions EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:1999) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13857-1:2003 and the following apply. 3.1 bulk density mass of a free-flowing substance poured into a measuring cylinder divided by its corresponding volume 3.2 free-flowing substance substance in such a form that it can be readily transferred from one cylinder to another by pouring to give one continuous, homogeneous mass 4 Preparation of test samples For granular black powder some test methods given in 5.1 and 5.2 imply a preparation of the sample, e.g. by sieving. Details are given in the corresponding documents, the reference of which is given in Clause 2.



EN 13938-7:2004 (E) 5 5 Methods 5.1 Methods for black powder used as propellant, pyrotechnic or in safety fuses 5.1.1 Determination of thermal stability Determine the thermal stability in accordance with the method described in EN 13631-2.
5.1.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.