SIST EN 15307:2009

Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements

This European Standard defines for four main types of footwear minimum strength requirements for their sole-upper bonds produced with solvent-based or dispersion adhesives under specified conditions.

Klebstoffe für Leder und Schuhwerkstoffe - Sohlen-Obermaterial-Klebungen - Mindestanforderungen an die Festigkeit

Diese Europäische Norm legt für vier Hauptarten von Schuhen Mindestanforderungen an die Festigkeit von
Sohlen-Obermaterial-Klebungen fest, die unter festgelegten Bedingungen mit Lösemittel- oder
Dispersionsklebstoffen hergestellt wurden.

Colles pour cuir et matériaux de la chaussure - Collages tige-semelle - Exigences minimales en matiere de résistance

La présente Norme européenne définit quatre types principaux d?exigences minimales en matiere de
résistance des collages tige-semelle de chaussures obtenus, dans les conditions spécifiées, a l?aide de colles
solvantées ou en dispersion.

Lepila za usnjene in obutvene materiale - Vrhnji spoji podplata - Minimalne trdnostne zahteve

General Information

• Status: Withdrawn
• Publication Date: 08-Jan-2009
• Withdrawal Date: 21-Jan-2015
• ICS: 61.060 - Footwear
• ICS: 83.180 - Adhesives
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 22-Jan-2015
• Due Date: 14-Feb-2015
• Completion Date: 22-Jan-2015
• Ref Project: EN 15307:2007 - Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements

Relations

• Replaced By: SIST EN 15307:2015 - Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
• Effective Date: 01-Mar-2015
• Replaces: SIST EN 522:1999 - Adhesives for leather and footwear materials - Bond strength - Minimum requirements and adhesive classification
• Effective Date: 22-Dec-2008
• Replaces: SIST EN 1391:1999 - Adhesives for leather and footwear materials - A method for evaluating the bondability of materials - Minimum requirements and material classification
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lepila za usnjene in obutvene materiale - Vrhnji spoji podplata - Minimalne trdnostne zahteveKlebstoffe für Leder und Schuhwerkstoffe - Sohlen-Obermaterial-Klebungen - Mindestanforderungen an die FestigkeitColles pour cuir et matériaux de la chaussure - Collages tige-semelle - Exigences minimales en matiere de résistanceAdhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements83.180LepilaAdhesives61.060ObuvalaFootwearICS:Ta slovenski standard je istoveten z:EN 15307:2007SIST EN 15307:2009en,fr,de01-februar-2009SIST EN 15307:2009SLOVENSKI
STANDARDSIST EN 522:1999SIST EN 1391:19991DGRPHãþD



SIST EN 15307:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15307May 2007ICS 83.180Supersedes EN 1391:1998, EN 522:1998
English VersionAdhesives for leather and footwear materials - Sole-upper bonds- Minimum strength requirementsColles pour cuir et matériaux de la chaussure - Collagestige-semelle - Exigences minimales en matière derésistanceKlebstoffe für Leder und Schuhwerkstoffe - Sohlen-Obermaterial-Klebungen - Mindestanforderungen an dieFestigkeitThis European Standard was approved by CEN on 26 April 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15307:2007: ESIST EN 15307:2009



EN 15307:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.5 5 Minimum strength requirements.5 5.1 Specifications.5 5.1.1 General.5 5.1.2 Peel resistance after 4 d. at (23 ± 2) ° C.5 5.1.3 Initial peel resistance at (23 ± 2) º C.5 5.1.4 Peel resistance under constant load at (50 ± 2) º C.5 5.1.5 Ageing test.5 6 Test methods.6 6.1 Types of tests.6 6.2 Material identification.6 6.3 Adhesive identification.6 6.4 Preparation of test pieces.6 6.5 Storage of test pieces.6 6.6 Procedures and evaluation.6 7 Test report.7 Annex A (informative)
Reference test adhesives and reference test materials.8
SIST EN 15307:2009



EN 15307:2007 (E) 3 Foreword This document (EN 15307:2007) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2007, and conflicting national standards shall be withdrawn at the latest by November 2007. This document supersedes EN 1391:1998 and EN 522:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 15307:2009



EN 15307:2007 (E) 4 Safety statement Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. 1 Scope This European Standard defines for four main types of footwear minimum strength requirements for their sole-upper bonds produced with solvent-based or dispersion adhesives under specified conditions. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:2005, Adhesives — Terms and definitions EN 1392, Adhesives for leather and footwear materials — Solvent-based and dispersion adhesives — Testing of bond strength under specified conditions EN 15062, Adhesives for leather and footwear materials — Solvent-based and dispersion adhesives — Testing ageing of bonds under specified conditions EN ISO 868, Plastics and ebonite — Determin
...