SIST EN 14420-8:2005
(Main)Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)
This document applies to hose fittings with symmetrical half couplings (Guillemin system), with mobile locking ring, for hose assemblies with a maximum working pressure of up to 25 bar, with hose tails according to EN 14420 2 and clamp units according to EN 14420 3. Couplings in accordance with this document serve as link between hoses and connections to transport liquids, solids (e.g. powders, granules) except steam and liquid gas. It specifies dimensions, types of connections, quality of materials, marking requirements and testing requirements. The working temperature range is - 20 °C up to + 65 °C.
Schlaucharmaturen mit Klemmfassungen - Teil 8: Symmetrische Kupplungen (System Guillemin)
Raccords pour flexibles avec demi-coquille - Partie 8 : Demi raccords symétriques (systeme Guillemin)
Le présent document s'applique aux demi raccords symétriques (systeme Guillemin) a verrou mobile pour des flexibles destinés a etre utilisés a une pression de service maximale de 25 bar, munis de douilles conformes a l'EN 14420 2 et de demi-coquilles conformes a l'EN 14420 3. Les accouplements conformes a la présente norme européenne sont utilisés pour relier les tuyauteries flexibles et les raccordements destinés au transport de liquides, de matieres solides (par exemple des matieres pulvérulentes ou granulaires) a l'exception des gaz liquéfiés et de la vapeur. Le présent document prescrit les dimensions, les types de raccordements, la qualité des matériaux ainsi que les exigences de marquage et d'essai. La plage de température de service est de -20 °C a + 65 °C.
Cevni fitingi z objemkami - 8. del: Simetrična spojka (sistem Guillemin)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.OOHPLQSchlaucharmaturen mit Klemmfassungen - Teil 8: Symmetrische Kupplungen (System Guillemin)Raccords pour flexibles avec demi-coquille - Partie 8 : Demi raccords symétriques (systeme Guillemin)Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and jointsICS:Ta slovenski standard je istoveten z:EN 14420-8:2004SIST EN 14420-8:2005en01-marec-2005SIST EN 14420-8:2005SLOVENSKI
STANDARD
SIST EN 14420-8:2005
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14420-8November 2004ICS 23.040.70English versionHose fittings with clamp units - Part 8: Symmetrical half coupling(Guillemin system)Raccords pour flexibles avec demi-coquille - Partie 8 :Demi raccords symétriques (système Guillemin)Schlaucharmaturen mit Klemmfassungen - Teil 8:Symmetrische Kupplungen (System Guillemin)This European Standard was approved by CEN on 30 September 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14420-8:2004: ESIST EN 14420-8:2005
EN 14420-8:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Requirements.4 3.1 Pressures.4 3.2 Temperatures.5 4 Components.5 5 Dimensions.6 6 Types of connections.8 7 Designation.9 8 Materials.9 8.1 General.9 8.2 Coupling components.9 9 Marking.10 10 Type approval testing and quality control.10 Annex A (normative)
Gauge for symmetrical half couplings (Guillemin system).11 Bibliography.15
SIST EN 14420-8:2005
EN 14420-8:2004 (E) 3 Foreword This document (EN 14420-8:2004) has been prepared by Technical Committee CEN/TC 218 “Rubber and plastics hoses and hose assemblies”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. EN 14420 consists at the time of publication of the following parts: EN 14420-1, Hose fittings with clamp units — Part 1: Requirements, survey, designation and testing EN 14420-2, Hose fittings with clamp units — Part 2: Hose side parts of hose tail EN 14420-3, Hose fittings with clamp units — Part 3: Clamp units, bolted or pinned EN 14420-4, Hose fittings with clamp units — Part 4: Flange connections EN 14420-5, Hose fittings with clamp units — Part 5: Threaded connections EN 14420-6, Hose fittings with clamp units — Part 6: TW tank truck couplings EN 14420-7, Hose fittings with clamp units — Part 7: Cam locking couplings EN 14420-8, Hose fittings with clamp units — Part 8: Symmetrical half coupling (Guillemin system) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14420-8:2005
EN 14420-8:2004 (E) 4 1 Scope This document applies to hose fittings with symmetrical half couplings (Guillemin system), with mobile locking ring, for hose assemblies with a maximum working pressure of up to 25 bar, with hose tails according to EN 14420-2 and clamp units according to EN 14420-3. Couplings in accordance with this document serve as link between hoses and connections to transport liquids, solids (e.g. powders, granules) except steam and liquid gas. It specifies dimensions, types of connections, quality of materials, marking requirements and testing requirements. The working temperature range is − 20 °C up to + 65 °C. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1706, Aluminium and aluminium alloys — Castings — Chemical composition and mechanical properties EN 1982, Copper and copper alloys — Ingots and castings EN 10083-2, Quenched and tempered steels — Part 2: Technical delivery conditions for unalloyed steels EN 10088-1, Stainless steels — Part 1: List of stainless steels EN 10213-4, Technical delivery conditions for steel castings for pressure purposes — Part 4: Austenitic and austenitic-ferritic steel grades EN 14420-1, Hose fittings with clamp units — Part 1: Requirements, survey, designation and testing EN 14420-2, Hose fittings with clamp units — Part 2: Hose side parts of hose tail EN 14420-3, Hose fittings with clamp units — Part 3: Clamp units, bolted or pinned EN 14420-4, Hose fittings with clamp units — Part 4: Flange connections EN 14420-5, Hose fittings with clamp units — Part 5: Threaded connections EN ISO 228-1, Pipe threads where pressure-t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.