Explosives for civil uses - High explosives - Part 3: Determination of sensitiveness to friction of explosives

This document specifies a method for determining the sensitiveness to friction of explosives. This method is not applicable to liquid products.

Explosivstoffe für zivile Zwecke - Sprengstoffe - Teil 3: Bestimmung der Reibempfindlichkeit von Explosivstoffen

Dieses Dokument legt ein Verfahren zur Bestimmung der Reibempfindlichkeit von Sprengstoffen fest. Dieses Verfahren ist nicht auf flüssige Produkte anwendbar.

Explosifs a usage civil - Explosifs - Partie 3 : Détermination de la sensibilité au frottement des explosifs

Le présent document spécifie une méthode de détermination de la sensibilité au frottement des explosifs. Cette méthode n'est pas applicable aux produits liquides.

Eksplozivi za civilno uporabo – Razstreliva – 3. del: Ugotavljanje občutljivosti razstreliv na trenje

General Information

Status
Published
Publication Date
31-Oct-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Nov-2004
Due Date
01-Nov-2004
Completion Date
01-Nov-2004

Relations

Buy Standard

Standard
EN 13631-3:2004
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosivstoffe für zivile Zwecke - Sprengstoffe - Teil 3: Bestimmung der Reibempfindlichkeit von ExplosivstoffenExplosifs a usage civil - Explosifs - Partie 3 : Détermination de la sensibilité au frottement des explosifsExplosives for civil uses - High explosives - Part 3: Determination of sensitiveness to friction of explosives71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13631-3:2004SIST EN 13631-3:2004en01-november-2004SIST EN 13631-3:2004SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13631-3August 2004ICS 71.100.30 English versionExplosives for civil uses - High explosives - Part 3:Determination of sensitiveness to friction of explosivesExplosifs à usage civil - Explosifs - Partie 3 : Déterminationde la sensibilité au frottement des explosifsExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 3:Bestimmung der Reibempfindlichkeit von ExplosivstoffenThis European Standard was approved by CEN on 21 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13631-3:2004: E



EN 13631-3:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Preparation of test samples.4 5.1 Solid substances which are easily broken up or in powdered form.4 5.2 Plastic-bonded substances and other solids which are not easily broken up.5 5.3 Paste-like and gel-type substances.5 6 Apparatus.5 6.1 General.5 6.2 Loading device.5 6.3 Movable carriage.7 6.4 Porcelain plates.7 6.5 Motor and gearing.8 7 Procedure.8 8 Test report.10 Annex A (informative)
Range of applicability of the test method.11 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 93/15/EEC.12



EN 13631-3:2004 (E) 3 Foreword This document (EN 13631-3:2004) has been prepared by Technical Committee CEN/TC 321 "Explosives for civil uses", the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2005, and conflicting national standards shall be withdrawn at the latest by February 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document is one of a series of standards on Explosives for civil uses - High explosives. The other parts of this series are: prEN 13631-1 Part 1: Requirements EN 13631-2
Part 2: Determination of thermal stability of explosives EN 13631-4
Part 4: Determination of sensitiveness to impact of explosives EN 13631-5
Part 5: Determination of resistance to water EN 13631-6
Part 6: Determination of resistance to hydrostatic pressure EN 13631-7
Part 7: Determination of safety and reliability at extreme temperatures EN 13631-10
Part 10: Verification of the means of initiation EN 13631-11
Part 11: Determination of transmission of detonation prEN 13631-12 Part 12: Specification of boosters with different initiating capability EN 13631-13
Part 13: Determination of density EN 13631-14
Part 14: Determination of velocity of detonation prEN 13631-15 Part 15: Calculation of thermodynamic properties EN 13631-16 Part 16: Detection and measurement of toxic gases According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 13631-3:2004 (E) 4 1 Scope This document specifies a method for determining the sensitiveness to friction of explosives. This method is not applicable to liquid products. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 13857-1:2003, Explosives for civil uses — Part 1:Terminology EN 60672-3:1997, Ceramic and glass insulating materials — Part 3: Specifications for individual materials (IEC 60672-3:1997) EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:1999) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13857-1:2003 and the following apply. 3.1 reaction occurrence of report, crackling, sparking and/or flame 3.2 sensitiveness to friction lowest load at which a reaction is obtained from at least one out of six trials 4 Principle A small amount of the explosive is placed on a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.