Metallic industrial piping - Part 2: Materials

This part of EN 13480 covers the requirements for materials (including clad materials) for industrial piping and supports covered by EN 13480-1 constructed of metallic materials and is currently limited to steels with sufficient ductility below the creep range. It specifies the assessment of compliance for these materials. It also provides rules for the establishment of technical delivery conditions for materials for industrial piping.

Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe

Tuyauteries industrielles métalliques - Partie 2: Matériaux

Kovinski industrijski cevovodi - 2. del: Materiali - Dopolnilo A1

Ta del tega evropskega standarda določa zahteve za materiale (vključno s kovinskimi materiali za prevleke) za industrijske cevovode in nosilce iz standarda EN 13480-1, ki so izdelani iz kovinskih materialov. Trenutno je omejen na jekla z ustrezno duktilnostjo. Ta del tega evropskega standarda se ne uporablja za materiale v območju tečenja.

General Information

Status
Withdrawn
Publication Date
17-Nov-2013
Withdrawal Date
06-Dec-2017
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-Dec-2017
Due Date
30-Dec-2017
Completion Date
07-Dec-2017

Relations

Buy Standard

Amendment
EN 13480-2:2012/A1:2013
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13480-2:2012/A1:2013
01-december-2013
Kovinski industrijski cevovodi - 2. del: Materiali - Dopolnilo A1
Metallic industrial piping - Part 2: Materials
Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe
Tuyauteries industrielles métalliques - Partie 2: Matériaux
Ta slovenski standard je istoveten z: EN 13480-2:2012/A1:2013
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-2:2012/A1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-2:2012/A1:2013

---------------------- Page: 2 ----------------------

SIST EN 13480-2:2012/A1:2013


EUROPEAN STANDARD
EN 13480-2:2012/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2013
ICS 23.040.01
English Version
Metallic industrial piping - Part 2: Materials
Tuyauteries industrielles métalliques - Partie 2: Matériaux Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe
This amendment A1 modifies the European Standard EN 13480-2:2012; it was approved by CEN on 5 August 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-2:2012/A1:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13480-2:2012/A1:2013
EN 13480-2:2012/A1:2013 (E)
Contents Page
Foreword .3
1 Modification to Foreword .4
2 Modification to 3.2 .4
3 Modification to 4.2.2.1 .4
4 Modification to Clause 5 .4
5 Modification to B.2.2.1 .4
6 Modification to B.2.2.4 .4
7 Modification to B.2.2.6 .5
8 Modification to B.2.3.1 .5
9 Modification to Clause C.5 .5
10 Modification to Clause Y.1 .5

2

---------------------- Page: 4 ----------------------

SIST EN 13480-2:2012/A1:2013
EN 13480-2:2012/A1:2013 (E)
Foreword
This document (EN 13480-2:2012/A1:2013) has been prepared by Technical Committee CEN/TC 267
“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This Amendment to the Europe
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.