SIST EN 13900-3:2003
(Main)Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
This part of EN ..... specifies a method of determining in polyethylene (PE) the colouristic properties of a test pigment relative to a standard, and the ease of dispersion DH/PE of pigments from the differences in colour strength on dispersing colouring materials under various conditions. The method is appropriate for use with organic and inorganic black and colour pigments.
Pigmente und Füllstoffe - Dispergierverfahren und Beurteilung der Dispergierbarleit in Kunststoffen - Teil 3: Bestimmung der koloristischen Eigenschaften und der Dispergierhärte von Schwarz- und Buntpigmenten in Polyethylen im Walztest
Dieser Teil von EN ... legt ein Verfahren zum Bestimmen der koloristischen Eigenschaften eines zu prüfenden Pigmentes in Polyethylen (PE) im Vergleich zu einem Standard fest sowie zum Bestimmen und der Dispergierhärte DHpe von Pigmenten aus den Farbstärkeunterschieden beim Dispergieren von Farbmitteln bei unterschiedlichen Bedingungen. Das Verfahren ist für organische und anorganische Schwarz- und Buntpigmente geeignet.
Pigments et matieres de charge - Méthodes de dispersion et évaluation de l'aptitude a la dispersion dans les plastiques - Partie 3: Détermination des propriétés colorimétriques et de la facilité de dispersion des pigments noirs et colorés dans le polyéthylene par calandrage sur bicylindre
Cette partie de la présente Norme européenne prescrit une méthode permettant de déterminer dans le polyéthylene (PE) les propriétés colorimétriques d'un pigment d'essai par rapport a un étalon, ainsi que la facilité de dispersion DHPE des pigments a partir des différences d'intensité de couleur lorsque des matieres colorantes sont dispersées dans différentes conditions.
La méthode A convient pour les pigments organiques en poudre et pour les pigments au noir de carbone sous forme de poudre, qui sont, dans un grand nombre de cas, sujets au compactage (réagglomération sous pression) ; elle peut également etre utilisée avec les pigments inorganiques en poudre et avec les préparations de pigments, en poudre ou sous forme de flocons.
La méthode B est appropriée aux essais de pigments et de préparations de pigments sous forme granulaire ainsi qu'aux essais de pigments inorganiques quelle que soit leur forme.
La facilité de dispersion déterminée de cette maniere n'est valable que pour l'équipement, les conditions et le milieu de dispersion utilisés. Des conditions d'essai différentes de celles spécifiées peuvent entraîner des résultats différents ; cela s'applique aussi bien a la valeur absolue de la facilité de dispersion qu'a la relation entre les différentes valeurs des divers pigments. L'indice DHPE est donc utilisé pour désigner la valeur obtenue conformément a la présente partie de la Norme.
Pigmenti in polnila - Metode disperzije in ugotavljanje disperzivnosti v plastičnih masah - 3. del: Določevanje barvnih lastnosti in lahke disperzije črnih in barvnih pigmentov v polietilenu z valjanjem dveh valjčkov
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pigmente und Füllstoffe - Dispergierverfahren und Beurteilung der Dispergierbarleit in Kunststoffen - Teil 3: Bestimmung der koloristischen Eigenschaften und der Dispergierhärte von Schwarz- und Buntpigmenten in Polyethylen im WalztestPigments et matieres de charge - Méthodes de dispersion et évaluation de l'aptitude a la dispersion dans les plastiques - Partie 3: Détermination des propriétés colorimétriques et de la facilité de dispersion des pigments noirs et colorés dans le polyéthylene par calandrage sur bicylindrePigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling83.040.30Pomožni materiali in aditivi za polimerne materialeAuxiliary materials and additives for plasticsICS:Ta slovenski standard je istoveten z:EN 13900-3:2003SIST EN 13900-3:2003en01-april-2003SIST EN 13900-3:2003SLOVENSKI
STANDARD
SIST EN 13900-3:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13900-3February 2003ICS 83.040.30English versionPigments and extenders - Methods of dispersion andassessment of dispersibility in plastics - Part 3: Determination ofcolouristic properties and ease of dispersion of black and colourpigments in polyethylene by two-roll millingPigments et matières de charge - Méthodes de dispersionet évaluation des caractéristiques de dispersibilité dans lesplastiques - Partie 3: Détermination des propriétéscolorimétriques et de la facilité de dispersion des pigmentsnoirs et colorés dans le polyéthylène par calandrage surbicylindrePigmente und Füllstoffe - Dispergierverfahren undBeurteilung der Dispergierbarleit in Kunststoffen - Teil 3:Bestimmung der koloristischen Eigenschaften und derDispergierhärte von Schwarz- und Buntpigmenten inPolyethylen im WalztestThis European Standard was approved by CEN on 12 December 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13900-3:2003 ESIST EN 13900-3:2003
EN 13900-3:2003 (E)2ForewordThis document (EN 13900-3:2003) has been prepared by Technical Committee CEN/TC 298 "Pigments andextenders", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by August 2003, and conflicting national standards shall be withdrawn at the latest byAugust 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13900-3:2003
EN 13900-3:2003 (E)31 ScopeThis part of this European Standard specifies a method of determining in polyethylene (PE) the colouristic propertiesof a test pigment relative to a standard, and the ease of dispersion DHPE of pigments from the differences in colourstrength on dispersing colouring materials under various conditions.Method A is appropriate for use with organic powder pigments and carbon black pigments in powder form, many ofwhich are subject to compaction (reagglomeration under pressure), for inorganic pigments in powder form and forpigment preparations in powder or flake form.Method B is appropriate for testing pigments and pigment preparations in granular form and for inorganic pigmentsin any form.The ease of dispersion determined in this way is valid only for the dispersion equipment, dispersion conditions anddispersion medium being used. The use of test conditions differing from those specified may give different results; thisapplies both to the absolute magnitude and to the relation between values of the ease of dispersion of variouspigments. The subscript DHPE is therefore used to designate the value obtained as specified in this part of thisEuropean Standard.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 12877-1, Colouring materials in plastics - Determination of colour stability to heat during processing of colouringmaterials in plastics - Part 1: General introduction.EN ISO 787-24:1995, General method of tests for pigments and extenders - Part 24: Determination of relativetinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods (ISO787-24:1985).EN ISO 15528, Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2000).ISO 7724-2:1984, Paints and varnishes – Colorimetry - Part 2: Colour measurement.3 Term and definitionFor the purposes of this European Standard the following term and definition applies.3.1ease of dispersion [DHPE]measure of the rate at which or the degree to which a pigment or extender achieves a given level of dispersionwhen dispersed in a plastics material. The DHPE is derived from the increase in colour strength achieved by two-rollmilling as specified in 8.2, relative to the colour strength achieved as specified in 8.14 PrincipleUsing a two-roll mill, the pigment under test is dispersed at an appropriate temperature in the polymer. The cooledmilled sheet obtained in this way is then subjected to the higher shearing forces resulting from two-roll milling at anarrower gap width. The resulting increase in colour strength (see EN 12877-1) is a measure of the ease of dispersionDHPE.SIST EN 13900-3:2003
EN 13900-3:2003 (E)45 Materials5.1 Materials for method A5.1.1 Test mediumPolyethylene, in powder or flake form; of a type and grade to be agreed between the interested parties.NOTEWhere HDPE is used, a phenolic antioxidant can be used to facilitate processing.5.1.2 Titanium dioxide pigmentEasily dispersing powder grade of a type recommended for use in po
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.