iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 391:1996

(Main)

Glued laminated timber - Delamination test of glue lines

Glued laminated timber - Delamination test of glue lines

This standard specifies three delamination methods for continuous quality control of the glue line integrity of glued laminated timber.

Brettschichtholz - Delaminierungsprüfung von Leimfugen

Diese Norm beschreibt drei Delaminierungsverfahren zur laufenden Überwachung der Leimfugengüte bei Brettschichtholz.

Bois lamellé collé - Essai de délamination des joints de collage

La présente norme décrit trois méthodes de délamination destinées au contrôle, en cours de production, de l'intégrité des joints de collage dans le bois lamellé-collé.

Lepljen lameliran les - Delaminacijski preskus lepljenih stikov

General Information

Status
Withdrawn
Publication Date
31-Jul-1996
Withdrawal Date
30-Jun-2002
ICS
79.060.99 - Other wood-based panels
Technical Committee
KON - Structures
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jul-2002
Due Date
01-Jul-2002
Completion Date
01-Jul-2002
Directive
89/106/EEC - Construction products
Mandate
M/112 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural timber products
Ref Project
EN 391:1995 - Glued laminated timber - Delamination test of glue lines

Relations

Replaced By
SIST EN 391:2002 - Glued laminated timber - Delamination test of glue lines
Effective Date
01-Jul-2002

Buy Standard

EN 391:1996EN 391:1996
PreviousNext
Standard
EN 391:1996
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lepljen lameliran les - Delaminacijski preskus lepljenih stikovBrettschichtholz - Delaminierungsprüfung von LeimfugenBois lamellé collé - Essai de délamination des joints de collageGlued laminated timber - Delamination test of gl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12369-3:2022(Main)
Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels
EN 12369-3:2022

This document provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995-1-1.
This document includes the characteristic values of the mechanical properties and of the raw density for solid-wood panels complying with prEN 13353:2021 technical classes SWP/1 S, SWP/2 S, SWP/3 S.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13353:2022(Main)
Solid wood panels (SWP) - Requirements
EN 13353:2022

This document specifies requirements for solid wood panels as defined in EN 12775 with a maximum thickness of 80 mm for use in dry, humid and exterior conditions as defined in service classes 1, 2 and 3 of EN 1995-1-1:2004.
Additional information on supplementary properties for certain applications is also given.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14080:2013(Main)
Timber structures - Glued laminated timber and glued solid timber
EN 14080:2013

This European Standard sets the performance requirements of the following glued laminated products: - Glued laminated timber (glulam); - Glued solid timber; - Glulam with large finger joints; - Block glued glulam for use in buildings and bridges. It also lays down minimum production requirements, provisions for evaluation and attestation of conformity and marking of glued laminated products. This European Standard is applicable for glued laminated timber made of coniferous species listed in this standard or poplar consisting of two or more laminations having a thickness from 6 mm up to 45 mm (inclusive). It may be possible to produce glulam made from specific hardwood species based on some provisions of this European Standard. In this case, Annex ZA does not apply. This European Standard is applicable for glued solid timber made of coniferous species listed in this standard or poplar consisting of two to five laminations having a thickness greater than 45 mm and less than or equal to 85 mm. This European Standard is applicable for large finger joints in glued laminated timber with a finger length of at least 45 mm. This European Standard is applicable for block glued glulam having solid rectangular cross sections. This European Standard also gives the requirements for glued laminated products treated against biological attack. Glued laminated products treated with fire retardants are not covered.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14279:2005+A1:2009(Main)
Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
EN 14279:2004+A1:2009

This document gives definitions, a classification and specifies the requirements for Laminated Veneer Lumber (LVL) for general purposes or for use in construction in dry, humid or exterior conditions.
NOTE   This standard will be called up in EN 13986 for construction applications.
Annex A "Evaluation of the bonding quality of laminated veneer lumber" is normative
Information on supplementary properties is given in Annex B.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13354:2009(Main)
Solid wood panels - Bonding quality - Test method
EN 13354:2008

This European Standard specifies a test method for determining the bonding quality of single-layer and multi-layer solid wood panels by a shear test.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13017-1:2004(Main)
Solid wood panels - Classification by surface appearance - Part 1: Softwood
EN 13017-1:2000

This European Standard specifies general requirements and appearance classes for both single-layer and multi-layer solid wood panels, the latter with a minimum thickness of the outer layers of 3,5 mm, manufactured from softwood species (e.g. spruce, pine, larch).

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13017-2:2004(Main)
Solid wood panels - Classification by surface appearance - Part 2: Hardwood
EN 13017-2:2000

This European Standard specifies general requirements and appearance classes for both single layer and multi-layer solid wood panels, the latter with a minimum thickness of the outer layers of 3,5 mm, manufactured from hardwood species.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12775:2004(Main)
Solid wood panels - Classification and terminology
EN 12775:2001

This European standard gives a classification for solid wood panels and defines  important terms used with solid wood panels.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14279:2005/kprA1:2008(Amendment)
Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
EN 14279:2004/prA1

This European Standard gives definitions, a classification and specifies the requirements for Laminated Veneer Lumber (LVL) for general  purposes or for use in construction in dry, humid or  exterior conditions.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 14080:2009(Main)
Timber structures - Glued laminated timber and glued laminated solid timber - Requirements
prEN 14080

This European Standard specifies the requirements for glued laminated timber for use in load bearing structures. It also specifies the requirements for large finger joints in the glued laminated timber. This European Standard specifies the requirements for glued laminated timber produced from untreated timber or from timber treated against biological attack.

  • Draft
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day