Industrial, commercial, garage doors and gates - Product standard, performance characteristics

1.1   General
This European Standard specifies the safety and performance requirements for doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods.
These doors can include pass doors incorporated in the door leaf which are also covered by this European Standard.
These devices can be manually or power operated.
This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-3.
1.2   Exclusions
This European Standard does not apply to the following which are intended for a different use:
-   lock gates and dock gates;
-   doors on lifts;
-   doors on vehicles;
-   armoured doors;
-   doors mainly for the retention of animals;
-   theatre textile curtains;
-   horizontally moving manually operated pedestrian doors with a leaf size less than 6,25 m²;
-   horizontally moving power operated doors less than 2,5 m wide and 6,25 m² area, designed principally for pedestrian use in accordance with prEN 12650-1;
-   revolving doors of any size;
-   railway barriers;
-   barriers used solely for vehicles.
This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards should be applied in addition.
This European Standard does not contain any specific requirements for fire resistance or smoke control characteristics which are covered in prEN 13241-2.
(....)

Tore - Produktnorm, Leistungseigenschaften

Portes et portails industriels, commerciaux et de garage - Norme de produit, caractéristiques de performance

Vrata v industrijske in javne prostore ter garažna vrata - Standard za proizvod, zahtevane lastnosti

General Information

Status
Not Published
Public Enquiry End Date
29-May-2016
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
19-Oct-2016
Due Date
24-Oct-2016
Completion Date
19-Oct-2016

RELATIONS

Buy Standard

Amendment
SIST EN 13241-1:2003+A1:2011/kFprA2:2016
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 13241-1:2003+A1:2011/kFprA2:2016
01-maj-2016
Vrata v industrijske in javne prostore ter garažna vrata - Standard za proizvod,
zahtevane lastnosti
Industrial, commercial, garage doors and gates - Product standard, performance
characteristics
Tore - Produktnorm, Leistungseigenschaften
Portes et portails industriels, commerciaux et de garage - Norme de produit,
caractéristiques de performance
Ta slovenski standard je istoveten z: EN 13241-1:2003+A1:2011/FprA2
ICS:
91.060.50 Vrata in okna Doors and windows
91.090 Konstrukcije zunaj stavb External structures
SIST EN 13241- en,fr,de
1:2003+A1:2011/kFprA2:2016

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13241-1:2003+A1:2011/kFprA2:2016
---------------------- Page: 2 ----------------------
SIST EN 13241-1:2003+A1:2011/kFprA2:2016
FINAL DRAFT
EUROPEAN STANDARD
EN 13241-
NORME EUROPÉENNE
1:2003+A1:2011
EUROPÄISCHE NORM
FprA2
March 2016
ICS 91.090
English Version
Industrial, commercial, garage doors and gates - Product
standard, performance characteristics

Portes et portails industriels, commerciaux et de Tore - Produktnorm, Leistungseigenschaften

garage - Norme de produit, caractéristiques de
performance

This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical

Committee CEN/TC 33.

This draft amendment A2, if approved, will modify the European Standard EN 13241-1:2003+A1:2011. If this draft becomes an

amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13241-

worldwide for CEN national Members. 1:2003+A1:2011/FprA2:2016 E
---------------------- Page: 3 ----------------------
SIST EN 13241-1:2003+A1:2011/kFprA2:2016
EN 13241-1:2003+A1:2011/FprA2:2016 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

1 Modification to the title ................................................................................................................................ 4

2 Modification to the reference number of the consolidated text .................................................... 4

3 Modification to the Foreword ..................................................................................................................... 4

4 Modification to Clause 1, Scope .................................................................................................................. 4

5 Modification to ZA.3, CE-marking and labelling ................................................................................... 5

6 Modification to the final Bibliography..................................................................................................... 5

---------------------- Page: 4 ----------------------
SIST EN 13241-1:2003+A1:2011/kFprA2:2016
EN 13241-1:2003+A1:2011/FprA2:2016 (E)
European foreword

This document (EN 13241-1:2003+A1:2011/FprA2:2016) has been prepared by Technical Committee

CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which

is held by AFNOR.
This document is currently submitted to the Unique Acceptance Procedure.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association, and supports essential requirements of EU Directive(s).

The only changes introduced by this Amendment 2 to EN 13241-1:2003+A1:2011 concern the title and

the scope according to the EC' request and the CEN/TC 33 decisions D1010 (April/2014), D1074 and

D1089 (April 2015).
--------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.