iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 636 S1:1998

(Main)

High-voltage fuses -- Part 2: Expulsion fuses

High-voltage fuses -- Part 2: Expulsion fuses

Specifies requirements for expulsion fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz, and of rated voltages exceeding 1 000 V.

Hochspannungssicherungen -- Teil 2: Austreibende Sicherungen

Fusibles à haute tension -- Partie 2: Coupe-circuit à expulsion

Définit les conditions exigées pour les fusibles à expulsion, destinés à être utilisés à l'extérieur ou à l'intérieur sur des réseaux à courant alternatif 50 Hz et 60 Hz et dont les tensions assignées sont supérieures à 1 000 V.

High-voltage fuses - Part 2: Expulsion fuses (IEC 60282-2:1995)

General Information

Status
Withdrawn
Publication Date
31-Mar-1998
Withdrawal Date
11-Sep-2024
ICS
29.120.50 - Fuses and other overcurrent protection devices
Technical Committee
EVA - Fuses
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
12-Sep-2024
Due Date
05-Oct-2024
Completion Date
12-Sep-2024
Ref Project
HD 636 S1:1996 - High-voltage fuses - Part 2: Expulsion fuses

Buy Standard

HD 636 S1:1998HD 636 S1:1998
PreviousNext
Standardization document
HD 636 S1:1998
English language
62 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-1998
High-voltage fuses - Part 2: Expulsion fuses (IEC 60282-2:1995)
High-voltage fuses -- Part 2: Expulsion fuses
Hochspannungssicherungen -- Teil 2: Austreibende Sicherungen
Fusibles à haute tension -- Partie 2: Coupe-circuit à expulsion
Ta slovenski standard je istoveten z: HD 636 S1:1996
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60691:2024(Main)
Thermal-links - Requirements and application guide (IEC 60691:2023)
EN IEC 60691:2023

This International Standard is applicable to thermal-links intended for incorporation in electrical
appliances, electronic equipment and component parts thereof, normally intended for use
indoors, in order to protect them against excessive temperatures under abnormal conditions.
NOTE 1 The equipment is not designed to generate heat.
NOTE 2 The effectiveness of the protection against excessive temperatures logically depends upon the position
and method of mounting of the thermal-link, as well as upon the current which it is carrying.
This document may be applicable to thermal-links for use under conditions other than indoors,
provided that the climatic and other circumstances in the immediate surroundings of such
thermal-links are comparable with those in this standard.
This document may be applicable to thermal-links in their simplest forms (e.g. melting strips or
wires), provided that molten materials expelled during function cannot adversely interfere with
the safe use of the equipment, especially in the case of hand-held or portable equipment,
irrespective of its position.
Annex H of this document is applicable to thermal-link packaged assemblies where the thermallink(
s) has already been approved to this standard but packaged in a metallic or non-metallic
housing and provided with terminals/wiring leads.
This document is applicable to thermal-links with a rated voltage not exceeding 690 V AC or
DC and a rated current not exceeding 63 A.
The objectives of this document are:
a) to establish uniform requirements for thermal-links,
b) to define methods of test, and
c) to provide useful information for the application of thermal-links in equipment.
This document is not applicable to thermal-links used under extreme conditions such as
corrosive or explosive atmospheres.
This document is not applicable to thermal-links to be used in circuits on AC with a frequency
lower than 45 Hz or higher than 62 Hz.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60269-6:2011/A1:2024(Amendment)
Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems (IEC 60269-6:2010/A1:2021 + COR1:2021)
EN 60269-6:2011/A1:2023

The contents of the corrigendum of November 2021 have been included in this copy.

  • Amendment
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60127-2:2015/A1:2024(Amendment)
Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:2014/A1:2023

NEXT ACTION: HAS CONSULTANT ASSESSMENT BY 2020-01-29
2020-07-06 link to LVD added, asked SR for ZZ and ZA

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60269-2:2013/A1:2023(Amendment)
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K (IEC 60269-2:2013/A1:2016)
HD 60269-2:2013/A1:2022

IEC 60269-2:2013 provides supplementary requirements for fuses for use by authorized persons and are generally designed to be used in installations where the fuse-links are accessible to, and may be replaced by, authorized persons only. Fuses for use by authorized persons according to the following fuse systems also comply with the requirements of the corresponding subclauses of IEC 60269-1, unless otherwise defined in this standard. This standard is divided into fuse systems, each dealing with a specific example of standardized fuses for use by authorized persons:  - Fuse system A: Fuses with fuse-links with blade contacts (NH fuse system),  - Fuse system B: Fuses with striker fuse-links with blade contacts (NH fuse system),  - Fuse system C: Fuse-rails (NH fuse system),  - Fuse system D: Fuse-bases for busbar mounting (NH fuse system),  - Fuse system E: Fuses with fuse-links for bolted connections (BS bolted fuse system),  - Fuse system F: Fuses with fuse-links having cylindrical contact caps (NF cylindrical fuse system),  - Fuse system G: Fuses with fuse-links with offset blade contacts (BS clip-in fuse system),  - Fuse system H: Fuses with fuse-links having 'gD' and 'gN' characteristic (class J and class time delay and non time delay fuse types),  - Fuse system I: gU fuse-links with wedge tightening contacts,  - Fuse system J: Fuses with fuse-links having 'gD class CC' and 'gN class CC' characteristics (class CC time delay and non-time delay fuse types),  - Fuse system K: gK fuse-links with blade for bolted connections - High fuse-link ratings from 1 250 A up to 4 800 A (master fuse-links). This fifth edition of IEC 60269-2 cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  1. fuse systems A and B: modified values for the power dissipation of NH aM fuse-links;  2. fuse systems A and B: introduction of dimension r for NH fuse-links;  3. addition of new fuse system K: gK fuse-links with contacts for bolted connections.   Key Words: fuse systems A to K,  requirements for fuses

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP IEC TR 60269-5:2022/AMD1:2023(Main)
Amendment 1 - Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
IEC TR 60269-5:2014/AMD1:2020
  • Technical report
    16 pages
    English language
    sale 15% off
  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60269-3:2010/A2:2023(Amendment)
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F (IEC 60269-3:2010/A2:2019)
HD 60269-3:2010/A2:2022

2018-05-14 PC: TC to finalize the finalize Annex ZA, ZZ and Risk assessment

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP IEC TR 60269-5:2022(Main)
Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
IEC TR 60269-5:2014

IEC/TR 60269-5:2014 serves as an application guide for low-voltage fuses, shows how current-limiting fuses are easy to apply to protect today's complex and sensitive electrical and electronic equipment. This guidance specifically covers low-voltage fuses up to 1 000 V a.c. and 1 500 V d.c. designed and manufactured in accordance with IEC 60269 series. This guidance provides important facts about as well as information on the application of fuses. This second edition cancels and replaces the first edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- recommendations for fuse operations in high altitudes added,
- more details for operational voltages added,
- recommendations for photovoltaic system protection added,
- numerous details improved Keywords: application guide for low-voltage fuses, current-limiting fuses

  • Technical report
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    130 pages
    English language
    sale 15% off
  • Technical report
    116 pages
    English and French language
    sale 15% off
SIST
SIST EN IEC 60282-1:2020(Main)
High-voltage fuses - Part 1: Current-limiting fuses (IEC 60282-1:2020)
EN IEC 60282-1:2020

This part of IEC 60282 applies to all types of high-voltage current-limiting fuses designed for
use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz and of rated
voltages exceeding 1 000 V.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60282-4:2020(Main)
High-voltage fuses - Part 4: Additional testing requirements for high-voltage expulsion fuses utilizing polymeric insulators (IEC 60282-4:2020)
EN IEC 60282-4:2020

This part of IEC 60282 applies to expulsion fuses complying with IEC 60282-2 and specifies
additional testing requirements for fuses employing a cutout fuse-base that utilizes polymeric
insulators.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60127-3:2015/A1:2020(Amendment)
Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-3:2015/A1:2020
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day