SIST EN 13453-1:2004

Furniture - Bunk beds and high beds for non-domestic use - Part 1: Safety, strength and durability requirements

This part of EN 13453 specifies safety, strength and durability requirements for bunk beds and high beds for non domestic use.
The strength and durability requirements of this standard are intended to represent use of a bed by one person only.
The dimensional requirements of EN 747-1:1993,4.4 apply unless a non-domestic bunk bed is to be used by adults only.

Möbel - Etagenbetten und Hochbetten für den Objektbereich - Teil 1: Anforderungen an die Sicherheit, Festigkeit und Dauerhaltbarkeit

Dieser Teil des prEN XYZ legt Anforderungen an die Sicherheit, Festigkeit und Dauerhaltbarkeit von Etagenbetten und Hochbetten im Objektbereich fest. Zusätzliche Maßanforderungen an Etagenbetten und Hochbetten für Kinder sind in EN 747-1, 4.3, 4.5 und 4.6.2 festgelegt.

Ameublement - Lits superposés et lits surélevés a usage non-domestique - Partie 1 : Exigences de sécurité, de résistance et de durabilité

Cette partie du projet EN 13453 spécifie les exigences relatives a la sécurité, la résistance et la durabilité des lits superposés et surélevés a usage non domestique.
Les exigences de résistance et de durabilité contenues dans cette norme correspondent a l'usage d'un lit par une seule personne.
Les exigences dimensionnelles de EN 747 1:1993 [1], paragraphe 4.4 s'appliquent a moins que le lit a usage non domestique ne soit utilisé que par des adultes.

Pohištvo – Pogradi in visoke postelje, ki niso za domačo uporabo - 1. del: Varnostne, trdnostne in trajnostne zahteve

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2004
• Withdrawal Date: 10-Oct-2012
• ICS: 97.140 - Furniture
• Technical Committee: POH - Furniture
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 24-Sep-2012
• Due Date: 17-Oct-2012
• Completion Date: 11-Oct-2012
• Ref Project: EN 13453-1:2004 - Furniture - Bunk beds and high beds for non-domestic use - Part 1: Safety, strength and durability requirements

Relations

• Replaced By: SIST EN 747-1:2012 - Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements
• Effective Date: 01-Nov-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Möbel - Etagenbetten und Hochbetten für den Objektbereich - Teil 1: Anforderungen an die Sicherheit, Festigkeit und DauerhaltbarkeitAmeublement - Lits superposés et lits surélevés a usage non-domestique - Partie 1 : Exigences de sécurité, de résistance et de durabilitéFurniture - Bunk beds and high beds for non-domestic use - Part 1: Safety, strength and durability requirements97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 13453-1:2004SIST EN 13453-1:2004en,fr,de01-december-2004SIST EN 13453-1:2004SLOVENSKI
STANDARD



SIST EN 13453-1:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13453-1June 2004ICS 97.140English versionFurniture - Bunk beds and high beds for non-domestic use - Part1: Safety, strength and durability requirementsMeubles - Lits superposés et lits en hauteur pour usagenon-domestique - Partie 1: Exigences relatives à lasécurité, solidité et durabilitéMöbel - Etagenbetten und Hochbetten für denObjektbereich - Teil 1: Anforderungen an die Sicherheit,Festigkeit und DauerhaltbarkeitThis European Standard was approved by CEN on 8 April 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13453-1:2004: ESIST EN 13453-1:2004



EN 13453-1:2004 (E) 2 Contents Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Safety requirements.5 4.1 Construction.5 4.2 Dimensions.5 4.2.1 Bed structure.5 4.2.2 Treads.5 4.3 Strength of bed base.6 4.4 Strength of frame and fastenings.6 4.5 Strength of safety barrier.6 4.6 Attachment, deflection and strength of means of access.6 4.7 Stability.7 5 Instructions for use.7 6 Marking.7 Bibliography.8
SIST EN 13453-1:2004



EN 13453-1:2004 (E) 3 Foreword This document (EN 13453-1:2004) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2004, and conflicting national standards shall be withdrawn at the latest by December 2004. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 13453-1:2004



EN 13453-1:2004 (E) 4
1 Scope This part of EN 13453 specifies safety, strength and durability requirements for bunk beds and high beds for non domestic use. The strength and durability requirements of this standard are intended to represent use of a bed by one person only. The dimensional requirements of EN 747-1:1993[1], 4.4 apply unless a non-domestic bunk bed is to be used by adults only. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references
...