SIST EN 300 058-6 V1.4.1:2004

• Abstract:

  Revision of test specification.

• Status: Published
• Publication Date: 31-Mar-2004
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Apr-2004
• Due Date: 01-Apr-2004
• Completion Date: 01-Apr-2004
• Ref Project: ETSI EN 300 058-6 V1.4.1 (2002-04) - Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Call Waiting (CW) supplementary service; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network

SIST EN 300 058-6 V1.4.1:2004 is the Slovene standard identical to ETSI EN 300 058-6 V1.4.1, published by SIST. It specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the network side of the Digital Subscriber Signalling System No. one (DSS1) Call Waiting (CW) supplementary service in ISDN. In practice, it is used to test and report conformance of network implementations at the user-network interface.

What does SIST EN 300 058-6 V1.4.1:2004 specify?

SIST EN 300 058-6 V1.4.1:2004 specifies the network-side ATS and partial PIXIT proforma for implementations conforming to EN 300 058-1 at the T reference point or coincident S and T reference point. It is part 6 of a multi-part CW deliverable and is tied to the network side, while other parts cover the protocol specification, PICS, and the user-side test structure and ATS.

The document is organized into 10 clauses plus 5 annexes.

Annex	What it covers
A	Protocol Conformance Test Report (PCTR) proforma
B	Partial PIXIT proforma
C	Abstract Test Suite (ATS)
D	Change record
E	Bibliography

What are the key requirements of SIST EN 300 058-6 V1.4.1:2004?

SIST EN 300 058-6 V1.4.1:2004 uses a combination of remote and multi-party abstract test methods in clause 4. That matters because the tests observe the network at more than one interface, but verdicts are assigned from the interface under test.

Clause 4 explains the role split between the Main Test Component (MTC) and one or more Parallel Test Components (PTCs). The MTC controls the PTCs through Co-ordination Messages (CM) and handles the Lower Tester (LT) at the main Point of Control and Observation (PCO), while the PTCs stimulate other interfaces. In practice, this means test setup and verdict logic must follow the interface being checked.

Clause 5 states that there are no untestable test cases for this ATS and ATM. For a laboratory, that means the test suite is intended to be executable as defined, without marked exclusions for untestable purposes.

Clause 6 fixes the TTCN version used to the version defined in ISO/IEC 9646-3. That matters because the ATS is written in that notation and executability depends on the same formal language.

Clause 7 gives a one-to-one mapping between test purpose identifiers and test case names. This helps users trace each test back to its purpose without interpreting a separate naming scheme.

Clauses 8 to 10 define conformance expectations for reports, PIXIT data, and the ATS itself. A lab producing a PCTR shall use the PCTR proforma in annex A, a test realizer shall produce an augmented partial PIXIT proforma and then a PIXIT proforma consistent with annex B, and any ExTS shall contain test groups and cases technically equivalent to annex C. In practice, this sets the documentation and implementation baseline for conformance assessment.

Annex B also drives practical test setup by collecting parameters such as call reference length, timer values, configuration of the IUT, and coding information elements used in SETUP handling. That means the tester must provide the values needed to run the suite on a specific network implementation.

What terms does SIST EN 300 058-6 V1.4.1:2004 define?

• Abstract Test Suite (ATS) - The structured set of abstract test cases used to assess protocol conformance.
• Implementation Under Test (IUT) - The network implementation being assessed.
• Lower Tester (LT) - The tester role that interacts with the interface under test.
• Point Of Control And Observation (PCO) - The point where test behavior is controlled and observed.
• Protocol Implementation Conformance Statement (PICS) - The statement describing what an implementation supports.
• Protocol Implementation eXtra Information for Testing (PIXIT) - Extra implementation-specific information needed to prepare testing.
• System Under Test (SUT) - The complete system being tested.
• Upper Tester (UT) - The tester role used at the upper interface.

Who uses SIST EN 300 058-6 V1.4.1:2004?

SIST EN 300 058-6 V1.4.1:2004 is used by conformance test laboratories, test realizers, and manufacturers or suppliers of ISDN network equipment that implements DSS1 Call Waiting. It is also relevant to quality and compliance teams that need to prepare test data, run ATS-based testing, and issue a PCTR. The document is focused on network-side verification, so it is especially useful where equipment must be checked at the user-network interface.

What changed in SIST EN 300 058-6 V1.4.1:2004 from the previous edition?

SIST EN 300 058-6 V1.4.1:2004 replaces the previous ETS 300 058-6 and the change record lists these updates:

• PDU constraints were updated where fields were missing, including the HOLD message constraints.
• Unused objects were deleted.
• Superfluous and out-of-date material was removed from clause 6 and the old annex D.
• The document was converted to EN layout.
• References to ETS 300 102 were replaced with EN 300 403-1.
• Some non-specific references were replaced with references intended to point to the latest version of the basic standards.

Which standards are used with SIST EN 300 058-6 V1.4.1:2004?

SIST EN 300 058-6 V1.4.1:2004 relies on EN 300 058-1 for the CW protocol specification, EN 300 058-2 for the PICS proforma, and EN 300 058-5 for the network-side Test Suite Structure and Test Purposes. It also uses EN 300 403-1 for circuit-mode basic call control, EN 300 141-1 for Call Hold subscription configuration, ITU-T I.411 for ISDN reference configurations, and ISO/IEC 9646-1 to -5 for the conformance testing framework, ATS specification, TTCN, test realization, and test laboratory requirements.

What does the SIST EN 300 058-6 V1.4.1:2004 document contain?

SIST EN 300 058-6 V1.4.1:2004 contains the ATS in both TTCN.GR and TTCN.MP forms, with the machine-processable and graphical representations provided as accompanying files. It also contains annex A’s PCTR proforma and annex B’s partial PIXIT proforma, both laid out for practical completion during conformance work.

Clause 4 includes the abstract test method description, conventions for test components and PCOs, and an example showing how multi-party and single-party styles differ. Annex A provides report fields for identification, IUT status, static and dynamic conformance, test campaign results, and observations. Annex B provides the test-laboratory, client, SUT, protocol, timer, configuration, and information-element items needed to prepare testing.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUHVNXãDQMHIntegrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Call Waiting (CW) supplementary service; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 300 058-6 Version 1.4.1SIST EN 300 058-6 V1.4.1:2004en01-april-2004SIST EN 300 058-6 V1.4.1:2004SLOVENSKI
STANDARD
ETSIEN300058-6V1.4.1(2002-04)EuropeanStandard(Telecommunicationsseries)IntegratedServicesDigitalNetwork(ISDN);DigitalSubscriberSignallingSystemNo.one(DSS1)protocol;CallWaiting(CW)supplementaryservice;Part6:AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationforthenetworkSIST EN 300 058-6 V1.4.1:2004

ETSIETSIEN300058-6V1.4.1(2002-04)2ReferenceREN/SPAN-130271-6KeywordsATS,CW,DSS1,ISDN,network,PIXIT,supplementaryserviceETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://portal.etsi.org/tb/status/status.aspIfyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]opartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2002.Allrightsreserved.DECTTM,PLUGTESTSTMandUMTSTMareTradeMarksofETSIregisteredforthebenefitofitsMembers.TIPHONTMandtheTIPHONlogoareTradeMarkscurrentlybeingregisteredbyETSIforthebenefitofitsMembers.3GPPTMisaTradeMarkofETSIregisteredforthebenefitofitsMembersandofthe3GPPOrganizationalPartners.SIST EN 300 058-6 V1.4.1:2004

ETSIETSIEN300058-6V1.4.1(2002-04)3ContentsIntellectualPropertyRights.5Foreword.51Scope.62References.63Definitionsandabbreviations.73.1Definitions.73.2Abbreviations.74AbstractTestMethod(ATM).84.1DescriptionofATMused.84.1.1ConventionsfortestcomponentsandPCOs.84.1.2Conventionsforvariablesandparameters.94.2AlternativeATM.105Untestabletestpurposes.106ATSconventions.116.1VersionofTTCNused.117ATStoTPmap.118PCTRconformance.119PIXITconformance.1110ATSconformance.12AnnexA(normative):ProtocolConformanceTestReport(PCTR)proforma.13A.1Identificationsummary.13A.1.1Protocolconformancetestreport.13A.1.2IUTidentification.13A.1.3Testingenvironment.13A.1.4Limitsandreservations.14A.1.5Comments.14A.2IUTconformancestatus.14A.3Staticconformancesummary.14A.4Dynamicconformancesummary.14A.5Staticconformancereviewreport.15A.6Testcampaignreport.15A.7Observations.15AnnexB(normative):PartialPIXITproforma.16B.1Identificationsummary.16B.2Abstracttestsuitesummary.16B.3Testlaboratory.16B.4Client(ofthetestlaboratory).17B.5SystemUnderTest(SUT).17B.6Protocolinformation.18B.6.1Protocolidentification.18SIST EN 300 058-6 V1.4.1:2004

ETSIETSIEN300058-6V1.4.1(2002-04)4B.6.2Parametervalues.18B.6.3ConfigurationofIUT.18B.6.4Timervalues.19B.7BasiccallPIXITitems.19B.7.1Parametervalues-informationelementcodings.19AnnexC(normative):AbstractTestSuite(ATS).20C.1TheTTCNGraphicalform(TTCN.GR).20C.2TheTTCNMachineProcessableform(TTCN.MP).20AnnexD(informative):Changerecord.21D.1ChangesbetweenEN300058-6V1.3.3andEN300058-6V1.4.1.21D.2ChangeswithrespecttothepreviousETS300058-6.21AnnexE(informative):Bibliography.22History.23SIST EN 300 058-6 V1.4.1:2004

ETSIETSIEN300058-6V1.4.1(2002-04)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://webapp.etsi.org/IPR/home.asp).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeServicesandProtocolsforAdvancedNetworks(SPAN).Thepresentdocumentispart6ofamulti-partdeliverablecoveringtheDigitalSubscriberSignallingSystemNo.one(DSS1)protocolspecificationfortheIntegratedServicesDigitalNetwork(ISDN)CallWaiting(CW)supplementaryservice,asidentifiedbelow:Part1:"Protocolspecification";Part2:"ProtocolImplementationConformanceStatement(PICS)proformaspecification";Part3:"TestSuiteStructureandTestPurposes(TSS&TP)specificationfortheuser";Part4:"AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationfortheuser";Part5:"TestSuiteStructureandTestPurposes(TSS&TP)specificationforthenetwork";Part6:"AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationforthenetwork".NationaltranspositiondatesDateofadoptionofthisEN:26April2002DateoflatestannouncementofthisEN(doa):31July2002DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31January2003DateofwithdrawalofanyconflictingNationalStandard(dow):31January2003SIST EN 300 058-6 V1.4.1:2004

ETSIETSIEN300058-6V1.4.1(2002-04)61ScopeThepresentdocumentspecifiestheAbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformafortheNetworksideoftheTreferencepointorcoincidentSandTreferencepoint(asdefinedinITU-TRecommendationI.411[11])ofimplementationsconformingtothestagethreestandardfortheCallWaiting(CW)supplementaryserviceforthepan-EuropeanIntegratedServicesDigitalNetwork(ISDN)bymeansoftheDigitalSubscriberSignallingSystemNo.one(DSS1)protocol,EN300058-1[1].EN300058-5[3]specifiestheTestSuiteStructureandTestPurposes(TSS&TP)relatedtothisATSandpartialPIXITproformaspecification.OtherpartsspecifytheTSS&TPandtheATSandpartialPIXITproformafortheUsersideoftheTreferencepointorcoincidentSandTreferencepointofimplementationsconformingtoEN300058-1[1].2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublicationand/oreditionnumberorversionnumber)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.[1]ETSIEN300058-1(V1.2.4):"IntegratedServicesDigitalNetwork(ISDN);CallWaiting(CW)supplementaryservice;DigitalSubscriberSignallingSystemNo.one(DSS1)protocol;Part1:Protocolspecification".[2]ETSIEN300058-2(V1.2.4):"IntegratedServicesDigitalNetwork(ISDN);CallWaiting(CW)supplementaryservice;DigitalSubscriberSignallingSystemNo.one(DSS1)protocol;Part2:ProtocolImplementationConformanceStatement(PICS)proformaspecification".[3]ETSIEN300058-5(V1.2.4):"IntegratedServicesDigitalNetwork(ISDN);CallWaiting(CW)supplementaryservice;DigitalSubscriberSignallingSystemNo.one(DSS1)protocol;Part5:TestSuiteStructureandTestPurposes(TSS&TP)specificationforthenetwork".[4]ETSIEN300141-1:"IntegratedServicesDigitalNetwork(ISDN);CallHold(HOLD)supplementaryservice;DigitalSubscriberSignallingSystemNo.one(DSS1)protocol;Part1:Protocolspecification".[5]ISO/IEC9646-1:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part1:Generalconcepts".[6]ETSIEN300403-1(V1.3.2):"IntegratedServicesDigitalNetwork(ISDN);DigitalSubscriberSignallingSystemNo.one(DSS1)protocol;Signallingnetworklayerforcircuit-modebasiccallcontrol;Part1:Protocolspecification[ITU-TRecommendationQ.931(1993),modified]".[7]ISO/IEC9646-2:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part2:Abstracttestsuitespecification".[8]ISO/IEC9646-3:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part3:TheTreeandTabularCombinedNotation(TTCN)".[9]ISO/IEC9646-4:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part4:Testrealization".[10]ISO/IEC9646-5:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part5:Requirementsontestlaboratoriesandclientsfortheconformanceassessmentprocess".[11]ITU-TRecommendationI.411(1993):"ISDNuser-networkinterfaces-Referenceconfigurations".SIST EN 300 058-6 V1.4.1:2004

ETSIETSIEN300058-6V1.4.1(2002-04)73Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thefollowingtermsanddefinitionsapply:AbstractTestSuite(ATS):SeeISO/IEC9646-1[5].ImplementationUnderTest(IUT):SeeISO/IEC9646-1[5].LowerTester(LT):SeeISO/IEC9646-1[5].PointOfControlAndObservation(PCO):SeeISO/IEC9646-1[5].ProtocolImplementationConformanceStatement(PICS):SeeISO/IEC9646-1[5].PICSproforma:SeeISO/IEC9646-1[5].ProtocolImplementationExtraInformationForTesting(PIXIT):SeeISO/IEC9646-1[5].PIXITproforma:SeeISO/IEC9646-1[5].SystemUnderTest(SUT):SeeISO/IEC9646-1[5].UpperTester(UT):SeeISO/IEC9646-1[5].3.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ATMAbstractTestMethodATSAbstractTestSuiteCMCo-ordinationMessageCPCo-ordinationPointCWCallWaitingDSS1DigitalSubscriberSignallingNo1ExTSExecutableTestSuiteISDNIntegratedServicesDigitalNetworkIUTImplementationUnderTestLTLowerTesterMOTMeansOfTestingMTCMainTestComponentPCOPointofControlandObservationPCTRProtocolConformanceTestReportPDUProtocolDataUnitPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingPTCParallelTestComponentSUTSystemUnderTestTPTestPurposeTTCNTreeandTabularCombinedNotationUTUpperTesterSIST EN 300 058-6 V1.4.1:2004

ETSIETSIEN300058-6V1.4.1(2002-04)84AbstractTestMethod(ATM)4.1DescriptionofATMusedTherequirementfortestingthenetworkImplementationUnderTest(IUT)istofocusonthebehaviourofthenetworkIUTattheuser-networkinterfacewhereaTreferencepointorcoincidentSandTreferencepointapplies.ThustheIUTisthenetworkDSS1protocolentityataparticularuser-networkinterfaceandisnotthewholenetwork.ItispossibletospecifyanATSbasedonaSingleparty(remote)testmethodforsuchanIUT.However,itisconsideredthatanATSbasedonsuchanapproachisoflimiteduseastheonlywaytospecifyIUTgeneratedPDUsistousethe"implicitsend"statement.ManyusersofsuchanATSwouldreplacethe"implicitsend"statementswithdescriptionsofthebehaviouratotherinterfaces.AnATSbasedonamulti-partytestmethodisconsideredtobemoreusefulinthatitisclosertohowarealtestsuitewouldbeconstructed.Suchatestmethodspecifiesbehaviouratmultiplenetworkinterfaces.Oneveryimportantlimitationhereisthattestsarefocusedononeparticularinterface.ThusthetestsystemismadeuponeMainTestComponent(MTC)andoneormoreParallelTestComponents(PTC),seefigure1.4.1.1ConventionsfortestcomponentsandPCOsMasterpartSlavepartMTCAPTC1CPA1L0PCOL1PCOIUTNETWORKFigure1:Multi-partytestmethodSIST EN 300 058-6 V1.4.1:2004

ETSIETSIEN300058-6V1.4.1(2002-04)9Inamaster/slavearrangement,theMTCisconsideredtobethemasterwhilethePTCsaretheslaves.The"slave"testersareonlyanexplicitdescriptionofhowtodealwiththe"other"interfacesduringthetestingprocess,i.e."howtomaketheIUTsendtherequiredmessage".Thismeans,inparticular,thattheverdictwillonlybeassignedfromtheprotocolaspectsobservedontheinterfaceundertest(i.e.bythe"master"tester),asitwouldbeobservedbyaterminalconnectedtothisinterface.Afailureinthecorrelationbetweentheprotocolatthedifferentinterfacestowhichthedifferenttestersareconnected,i.e.inthemechanismofthefunctionalserviceitself,willnotcauseaFAILverdict.Forinstance,iftheIUTfailstosendamessageonthetestedinterfaceafteranotherinterfacehasreceivedtheproperstimulus,theverdictwillbeINCONCLUSIVE.TheMTCMTCAhastwofunctionsinthisconfiguration.Firstly,ithastheMTCfunctionofcontrollingtheoneormorePTCs.ThusitisresponsibleforstartingthePTCsandafterwardsco-ordinatesactivitiesbyexchangingCo-ordinationMessages(CM)withthePTCs.SecondlyitisresponsibleforthebehaviouroftheLowerTester(LT)atPointofControlandObservation(PCO)L0.Acombinationoftheremoteandmulti-partytestmethodsisapplied.Ascanbeseenfromfigure1,severalPCOsareused.AllPCOsresideattheserviceaccesspointsbetweenlayers2and3.MTCSUTPTC1Layer3Layer2Layer1L0IUTL1Layer3Layer2Layer1ServiceproviderFigure2:Combinationoftheremoteandmulti-partytestmethodsTheMTCPCOisnamed"L0"("L"forLower).PCOL0isusedtocontrolandobservethebehaviouroftheIUTandtestcaseverdictsareassigneddependingonthebehaviourobservedatthisPCO.ThePTCPTC1usesPCOL1.ThisPCOisusedtocontroland,inalimitedway,observethebehaviourofthenetworkequipmentatinterfacesotherthantheoneundertest.NoverdictsareassignedatthisPCO.Asstatedinapreviousclause,thenon-receiptofnetworkgeneratedmessagesatL0,whicharestimulatedbyeventsattheL1,willresultinINCONCLUSIVEratherthanFAILverdictsbeingassigned.4.1.2ConventionsforvariablesandparametersMTCAcallreferenceCREF1Bchannel(basic)bch_num1(toPTC1)channelnr(primary)CH_NUM1PCOL0IPN0,LIPN0PTC1callreferenceP1CREFBchannel(basic)P1_bch_numchannelnr(primary)P1_CH_NUMPCOL1IPN1,LIPN1SIST EN 300 058-6 V1.4.1:2004

ETSIETSIEN300058-6V1.4.1(2002-04)104.2AlternativeATMAsstatedinclause4.1,anATSbasedonasingle-party(remote)ATMispossible.SuchanATSmaybegeneratedfromtheonespecifiedinthepresentdocument.Thefollowinggeneralstepsshouldbetaken:1)removeallPTCbehaviour;2)removeallCREATEstatements;3)replaceCMswhichareusedtoprovokePDUsattheMTC,withimplicitsendstatements.Anexample,showingthedifferencebetweenthemulti-partyATMandsingle-partyATMforasingletestcase,isgivenintables1and2.Table1:Testcasedynamicbehaviourtableusingmulti-partyATMTESTCASEDYNAMICBEHAVIOURTestCaseNameHOLD_N04_001GroupRemoteUser_ST_OR_T/Holding/PurposeEnsurethattheIUT,whileintheActivecallstateN10,tonotifythenon-serveduserthatthecallisheldsendsaNOTIFYmessagewithanotificationindicatorcodedas"remotehold"touserBandremainsintheActivecallstate.DefaultDF69901(1)ConfigurationCONFIG1Comments9.2.1validoptionalNr|Label|BEHAVIOURDESCRIPTION|CREF|V|COMMENTS1||CREATE(PTC1:PTC1_IN_servedUser)|||2||+PR31002|||preambleN103||CPA1!CP_MSTARTTWAIT|S_HL||4||L0?NOTIFYr|A_NO20(CREF1,hold_NID)|(P)|5||+CS59901(10,1)|||checkN106||?TIMEOUTTWAIT||(I)|7||+PO49901(1)|||postambleN0DETAILEDCOMMENTS:Table2:Testcasedynamicbehaviourtableusingsingle-partyATMTESTCASEDYNAMICBEHAVIOURTestCaseNameHOLD_N04_001GroupRemoteUser_ST_OR_T/Holding/PurposeEnsurethattheIUT,whileintheActivecallstateN10,tonotifythenon-serveduserthatthecallisheldsendsaNOTIFYmessagewithanotificationindicatorcodedas"remotehold"touserBandremainsintheActivecallstate.DefaultDF69901(1)ConfigurationComments9.2.1validoptionalNr|Label|BEHAVIOURDESCRIPTION|CREF|V|COMMENTS1||+PR31002|||preambleN102|||NO20(CREF1,hold_NID)||3||L0?NOTIFYr|A_NO20(CREF1,hold_NID)|(P)|4||+CS59901(10,1)|||checkN105||?TIMEOUTTWAIT||(I)|6||+PO49901(1)|||postambleN0DETAILEDCOMMENTS:5UntestabletestpurposesTherearenountestabletestcasesassociatedwiththisATSandATM.SIST EN 300 058-6 V1.4.1:2004
...