SIST EN 301 473 V1.3.1:2006
(Main)Satellite Earth Stations and Systems (SES); Aircraft Earth Stations (AES) operating under the Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS)
Satellite Earth Stations and Systems (SES); Aircraft Earth Stations (AES) operating under the Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS)
The technical requirements in the present document are in two major categories:
• emission limits: to protect other radio services and systems from harmful interference generated by the AES in normal use;
• AES Control and Monitoring Functions (CMF): to protect other radio services and systems from unwanted transmissions from the AES. The CMF in each AES is capable of answering to commands from the Network Control Facilities (NCF) for its supporting satellite network.
NOTE: The requirements for Network Control Facilities (NCF) for S-PCN MES transmitting in the 1 610 MHz to 1 626,5 MHz band or the 1 980 MHz to 2 010 MHz band are contained in ETS 300 735 [4]; these requirements are also applicable to AES transmitting in those bands.
An AES may be subject to additional or alternative requirements in other standards depending on its functionality, in particular if it supports a service which is considered a justified case for regulation of terminal equipment interworking via the public telecommunications network. An AES will also be subject to additional airworthiness certification requirements.
Satelitske zemeljske postaje in sistemi (SES) – Letalske zemeljske postaje (AES), ki obratujejo v letalski mobilni satelitski storitvi (AMSS) in mobilni satelitski storitvi (MSS) oziroma v letalski mobilni satelitski storitvi na poti (AMS(R)S) in mobilni satelitski storitvi (MSS)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 473 V1.3.1:2006
01-februar-2006
Satelitske zemeljske postaje in sistemi (SES) – Letalske zemeljske postaje (AES),
ki obratujejo v letalski mobilni satelitski storitvi (AMSS) in mobilni satelitski
storitvi (MSS) oziroma v letalski mobilni satelitski storitvi na poti (AMS(R)S) in
mobilni satelitski storitvi (MSS)
Satellite Earth Stations and Systems (SES); Aircraft Earth Stations (AES) operating
under the Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS)
and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite
Service (MSS)
Ta slovenski standard je istoveten z: EN 301 473 Version 1.3.1
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
SIST EN 301 473 V1.3.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 473 V1.3.1:2006
---------------------- Page: 2 ----------------------
SIST EN 301 473 V1.3.1:2006
ETSI EN 301 473 V1.3.1 (2004-08)
European Standard (Telecommunications series)
Satellite Earth Stations and Systems (SES);
Aircraft Earth Stations (AES) operating under the
Aeronautical Mobile Satellite Service (AMSS)/
Mobile Satellite Service (MSS) and/or the
Aeronautical Mobile Satellite on Route Service (AMS(R)S)/
Mobile Satellite Service (MSS)
---------------------- Page: 3 ----------------------
SIST EN 301 473 V1.3.1:2006
2 ETSI EN 301 473 V1.3.1 (2004-08)
Reference
REN/SES-00073
Keywords
AMSS, aeronautical, earth station, mobile, MSS,
satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2004.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 473 V1.3.1:2006
3 ETSI EN 301 473 V1.3.1 (2004-08)
Contents
Intellectual Property Rights.8
Foreword.8
Introduction .8
1 Scope.9
2 References.9
3 Definitions and abbreviations.10
3.1 Definitions.10
3.2 Abbreviations.11
4 General.12
4.1 Presentation of equipment for testing purposes.12
4.2 Aircraft earth stations .12
4.3 Description of equipment .13
5 Requirements for AES transmitting in the band 1 610 MHz to 1 626,5 MHz .13
5.1 Unwanted emissions limits outside the band 1 610 MHz to 1 626,5 MHz and the band 1 626,5 MHz to
1 628,5 MHz (carrier-on) .13
5.1.1 Purpose.13
5.1.2 Conformance requirements.14
5.1.3 Method of test .14
5.1.4 Peak measurement.15
5.1.5 Average measurement.15
5.1.6 Test requirements.15
5.2 Unwanted emissions limits within the band 1 610 MHz to 1 626,5 MHz and the band 1 626,5 MHz to
1 628,5 MHz (carrier-on) .15
5.2.1 Purpose.15
5.2.2 Conformance requirements.16
5.2.3 Method of test .17
5.2.4 Measurement method.17
5.2.5 Test requirements.18
5.3 EIRP density limits within the operational band .18
5.3.1 Purpose.18
5.3.2 Conformance requirements.18
5.3.3 Method of test .18
5.3.4 Peak Limit Test.19
5.3.5 Mean Limit Test .19
5.3.6 Test requirements.19
5.4 Unwanted emissions limits (carrier-off).20
5.4.1 Purpose.20
5.4.2 Conformance requirements.20
5.4.3 Method of test .20
5.4.4 Peak measurement.20
5.4.5 Average measurement.21
5.4.6 Test requirements.21
5.5 AES Control and Monitoring Functions (CMF).21
5.5.1 Special test equipment .21
5.5.2 Self-monitoring functions.21
5.5.2.1 Processor monitoring.21
5.5.2.1.1 Purpose.21
5.5.2.1.2 Conformance requirements.21
5.5.2.1.3 Method of test.22
5.5.2.2 Transmit frequency generation sub-system monitoring .22
5.5.2.2.1 Purpose.22
5.5.2.2.2 Conformance requirements.22
5.5.2.2.3 Method of test.22
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 473 V1.3.1:2006
4 ETSI EN 301 473 V1.3.1 (2004-08)
5.5.3 Network control authorization and reception.22
5.5.3.1 Network control authorization .22
5.5.3.1.1 Purpose.22
5.5.3.1.2 Conformance requirements.22
5.5.3.1.3 Method of test.22
5.5.3.1.4 Test procedure.23
5.5.3.1.5 Test requirement.23
5.5.3.2 Network control reception transmit frequency control.23
5.5.3.2.1 Purpose.23
5.5.3.2.2 Conformance requirements.23
5.5.3.2.3 Method of test.23
5.5.3.2.4 Test procedure.24
5.5.3.2.5 Test requirement.24
5.6 Equipment identity.24
5.6.1 Purpose.24
5.6.2 Conformance requirements.24
5.6.3 Method of test .24
5.6.4 Test procedure.25
5.6.5 Test requirements.25
6 Requirements for AES transmitting in the band 1 626,5 MHz to 1 660,5 MHz .25
6.1 Unwanted emissions limits outside the band 1 626,5 MHz to 1 660,5 MHz and the band 1 660,5 MHz to
1 662,5 MHz.25
6.1.1 Purpose.25
6.1.2 Conformance requirements.25
6.1.3 Testing for carrier on state .28
6.1.3.1 Method of test .28
6.1.3.2 Measurement method.29
6.1.3.3 Test requirements.29
6.1.4 Testing for carrier off state .29
6.1.4.1 Method of test .29
6.1.4.2 Peak measurement method.30
6.1.4.3 Average measurement.30
6.1.4.4 Test requirements.30
6.2 Unwanted emissions limits within the band 1 626,5 MHz to 1 660,5 MHz and the band 1 660,5 MHz to
1 662,5 MHz.30
6.2.1 Purpose.30
6.2.2 Conformance requirements.31
6.2.2.1 General.31
6.2.2.2 Specification 1: Carrier-on state.31
6.2.2.3 Specification 2: Carrier-off state.32
6.2.3 Testing for carrier on state .32
6.2.3.1 Method of test .32
6.2.3.2 Measurement method.32
6.2.3.3 Test requirements.33
6.2.4 Testing for carrier off state .33
6.2.4.1 Method of test .33
6.2.4.2 Peak measurement method.33
6.2.4.3 Average measurement.33
6.2.4.4 Test requirements.34
6.3 AES Control and Monitoring Functions (CMF).34
6.3.1 Special test equipment .34
6.3.2 Self-monitoring functions.34
6.3.2.1 Processor monitoring.34
6.3.2.1.1 Purpose.34
6.3.2.1.2 Conformance requirements.34
6.3.2.1.3 Method of test.34
6.3.2.2 Transmit frequency generation sub-system monitoring .34
6.3.2.2.1 Purpose.34
6.3.2.2.2 Conformance requirements.34
6.3.2.2.3 Method of test.35
6.3.3 Network control authorization and reception.35
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 473 V1.3.1:2006
5 ETSI EN 301 473 V1.3.1 (2004-08)
6.3.3.1 Network control authorization .35
6.3.3.1.1 Purpose.35
6.3.3.1.2 Conformance requirements.35
6.3.3.1.3 Method of test.35
6.3.3.1.4 Test procedure.35
6.3.3.1.5 Test requirement.36
6.3.3.2 Network control reception transmit frequency control.36
6.3.3.2.1 Purpose.36
6.3.3.2.2 Conformance requirements.36
6.3.3.2.3 Method of test.36
6.3.3.2.4 Test procedure.36
6.3.3.2.5 Test requirement.37
6.4 Equipment identity.37
6.4.1 Purpose.37
6.4.2 Conformance requirements.37
6.4.3 Method of test .37
6.4.4 Test procedure.37
6.4.5 Test requirements.37
7 Requirements for AES transmitting in the band 1 980 MHz to 2 010 MHz .38
7.1 Unwanted emissions limits outside the band 1 980,1 MHz to 2 009,9 MHz (carrier-on) .38
7.1.1 Purpose.38
7.1.2 Conformance requirements.38
7.1.3 Method of test .39
7.1.4 Peak measurement.39
7.1.5 Average measurement.39
7.1.6 Test requirements.40
7.2 Unwanted emissions limits within the bands 1 980,1 MHz to 2 009,9 MHz, 1 978,1 MHz to
1 980,1 MHz and 2 009,9 MHz to 2 011,9 MHz (carrier-on).40
7.2.1 Purpose.40
7.2.2 Conformance requirements.40
7.2.3 Method of test .41
7.2.4 Measurement method.41
7.2.5 Test requirements.42
7.3 Unwanted emissions limits (carrier-off).42
7.3.1 Purpose.42
7.3.2 Conformance requirements.42
7.3.3 Method of test .42
7.3.4 Peak measurement.43
7.3.5 Average measurement.43
7.3.6 Test requirements.43
7.4 AES Control and Monitoring Functions (CMF).43
7.4.1 Special test equipment .43
7.4.2 Self-monitoring functions.44
7.4.2.1 Processor monitoring.44
7.4.2.1.1 Purpose.44
7.4.2.1.2 Conformance requirements.44
7.4.2.1.3 Method of test.44
7.4.2.2 Transmit frequency generation sub-system monitoring .44
7.4.2.2.1 Purpose.44
7.4.2.2.2 Conformance requirements.44
7.4.2.2.3 Method of test.44
7.4.3 Network control authorization and reception.44
7.4.3.1 Network control authorization .44
7.4.3.1.1 Purpose.44
7.4.3.1.2 Conformance requirements.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.