SIST EN 13042-1:2007
(Main)Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
1.1 This European Standard applies to the design and installation of gob feeders which provide hollow glass forming machines with gobs.
1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to gob feeders, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, operation and maintenance.
1.3 This European Standard does not deal with bowl firing.
1.4 This European Standard is not applicable to gob feeders which are manufactured before the date of publication of this European Standard by CEN.
Maschinen und Anlagen für die Herstellung, Be- und Verarbeitung von Hohlglas - Sicherheitsanforderungen - Teil 1: Tropfenspeiser
1.1 Diese Europäische Norm gilt für die Konstruktion und Installation von Tropfenspeisern, die Hohlglas-Formgebungsmaschinen mit Tropfen versorgen.
1.2 Diese Europäische Norm behandelt die signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf Tropfenspeiser zutreffen, wenn sie bestimmungsgemäß und entsprechend den für den Hersteller vorhersehbaren Bedingungen verwendet werden (siehe Abschnitt 4). Diese Europäische Norm spezifiziert die entsprechenden technischen Maßnahmen zur Beseitigung oder Verminderung der Risiken, die von diesen signifikanten Gefährdungen während der Inbetriebnahme, Bedienung und Wartung ausgehen können.
1.3 Diese Europäische Norm befasst sich nicht mit der Beheizung der Speiserschüssel.
1.4 Diese Europäische Norm gilt nicht für Tropfenspeiser, die hergestellt wurden, bevor CEN diese Europäi¬sche Norm veröffentlichte.
Machines et installations pour la production, le façonnage et la transformation du verre creux - Exigences de sécurité - Partie 1: Mécanisme d'alimentation en paraisons
1.1 La présente norme contient les prescriptions de sécurité destinées a la conception et a l'installation des mécanismes pouvant alimenter les machines en aval en paraisons. 1.2 La présente norme européenne traite tous les phénomenes dangereux significatifs relatifs aux mécanismes d'alimentation en paraisons lorsqu'ils sont utilisés normalement et dans les conditions prévues par le constructeur (voir article 4). Cette norme européenne spécifie les mesures techniques appropriées pour éliminer ou réduire les risques dus aux phénomenes dangereux significatifs.
Stroji in obrati za proizvodnjo, obdelavo in predelavo votlega stekla - Varnostne zahteve - 1. del: Dovajalnik za regulacijo kaplje
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feederStroji in obrati za proizvodnjo, obdelavo in predelavo votlega stekla - Varnostne zahteve - 1. del: Dovajalnik za regulacijo kapljeMachines et installations pour la production, le façonnage et la transformation du verre creux - Exigences de sécurité - Partie 1: Mécanisme d'alimentation en paraisonsMaschinen und Anlagen für die Herstellung, Be- und Verarbeitung von Hohlglas - Sicherheitsanforderungen - Teil 1: TropfenspeiserTa slovenski standard je istoveten z:EN 13042-1:2007SIST EN 13042-1:2007en81.100Equipment for the glass and ceramics industriesICS:SLOVENSKI
STANDARDSIST EN 13042-1:200701-maj-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13042-1February 2007ICS 81.100 English VersionMachines and plants for the manufacture, treatment andprocessing of hollow glass - Safety requirements - Part 1: GobfeederMachines et installations pour la production, le façonnageet la transformation du verre creux - Exigences de sécurité- Partie 1: Mécanisme d'alimentation en paraisonsMaschinen und Anlagen für die Herstellung, Be- undVerarbeitung von Hohlglas - Sicherheitsanforderungen -Teil 1: TropfenspeiserThis European Standard was approved by CEN on 15 December 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13042-1:2007: E
EN 13042-1:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.6 4 List of significant hazards.6 5 Safety requirements and/or protective measures.7 5.1 General.7 5.2 Starting and stopping and unexpected start-up.8 5.3 Emergency-stop equipment.8 5.4 Avoiding slip hazard.8 5.5 Design of manual controls.8 5.6 Guards.8 5.7 Lockout of shears.9 5.8 Hydraulic/pneumatic system.9 5.9 Electrical equipment.9 5.10 Energy supply disconnecting devices.9 5.11 Gob-loading interruption.9 5.12 Quick release refractory chucks.9 5.13 Refractory lifting device.9 5.14 Glass flow.9 5.15 Necessary movements in case of power failure.10 5.16 Safeguarding against contact with hot surfaces.10 6 Verification of safety requirements and/or protective measures.10 7 Information for use.11 7.1 General.11 7.2 Accompanying documents (in particular: Instruction handbook).11 7.3 Marking.11 Annex A (informative)
Glossary.13 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.14 Bibliography.15
Tables Table 1 — List of significant hazards.6 Table 2 — Individual testing for requirements stated in Clause 5.10
EN 13042-1:2007 (E) 3 Foreword This document (EN 13042-1:2007) has been prepared by Technical Committee CEN/TC 151 ”Construction equip-ment and building material machines — Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2007, and conflicting national standards shall be withdrawn at the latest by August 2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document is one of a series concerning machinery for the manufacture, treatment and processing of hollow glass (see Bibliography). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-tries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 13042-1:2007 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100-1. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indi-cated in the scope of this European Standard. When compiling this European Standard, it was assumed that the existing ad-hoc standards for components are applied. When provisions of this type C standard are different from those which are stated in type A or B standards, the pro-visions of this type C standard take precedence over the provisions of the other standards for machines that have been designed and built according to the provisions of this type C standard.
EN 13042-1:2007 (E) 5
1 Scope 1.1 This European Standard applies to the design and installation of gob feeders which provide hollow glass forming machines with gobs. 1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to gob feeders, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, operation and maintenance. 1.3 This European Standard does not deal with bowl firing. 1.4 This European Standard is not applicable to gob feeders which are manufactured before the date of publica-tion of this European Standard by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery — Safety distances to prevent danger zones being reached by the upper limbs EN 418:1992, Safety of machinery — Emergency stop equipment, functional aspects — Principles for design EN 894-3:2000, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design EN 982:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Hy-draulics EN 983:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Pneu-matics EN 1037:1995, Safety of machinery — Prevention of unexpected start-up EN 1050:1996, Safety of machinery — Principles for risk assessment EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic termi-nology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles (ISO 12100-2:2003) EN 60204-1:2006, Safety of machinery — Electrical equipment of machines — Part 1: General requirements (IEC 60204-1:2005)
EN 13042-1:2007 (E) 6 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003 and the following ap-ply. 3.1 gob feeder machine fed by a continuous flow of molten glass through a spout bowl, a flow control, a shape control of the gob and a cutting device, as i.e. a rotating tube, a plunger mechanism with single or multiple plungers and a shearing device situated below the orifices.
NOTE All mechanisms that comprise the gob feeder maintain a synchronised timing relationship with any hollow-glass forming machine 3.2 start-up beginning of the working cycle of the whole feeder with shearing 4 List of significant hazards This clause contains the significant hazards, hazardous situations and events, as far as they are dealt with in this European Standard, identified by risk assessment as significant for gob feeders and which require action to elimi-nate or reduce the risk. Before using this European Standard, it is important to carry out a general risk assessment of the machine in ques-tion. Table 1 — List of significant hazards Clause Hazards ( ) = Ref. No. from Table A.1 of EN 1050:1996 Dangerous items Preventive measures: see clause: 4.1 Mechanical hazards: (1)
4.1.1 Crushing (1.1) moving parts against other moving or stationary parts 5.6 4.1.2 Shearing (1.2) edge tools (shear blade)
5.7 4.1.3 Cutting or severing (1.3) broken glass 7.2.4 4.1.4 Entanglement (1.4) chain and sprocket and belt and pulley drives of various feeder components 5.6 4.1.5 Drawing-in or trapping (1.5) shear mechanism, plunger mecha-nism 5.6
EN 13042-1:2007 (E) 7
Table 1 (concluded) Clause Hazards ( ) = Ref. No. from table A.1 of EN 1050:1996 Dangerous items Preventive measures: see clause: 4.1.6 Impact (1.6) shear mechanism, plunger mecha-nism 5.6 4.1.7 Stabbing or puncture (1.7) strands of glass 7.2.4 4.1.8 High pressure fluid ejection (1.9) all mechanisms that use forced lu-brication systems or hydraulically operated mechanism with pressure above 50 bar 5.8; 5.10; 7.2.8 4.2 Electrical (2.1; 2.2) direct or indirect contact 5.9; 5.10; 7.2.8 4.3 Thermal resulting in: (3)
4.3.1 Burns (3.1) hot glass, hot machine parts 5.11 to 5.16; 7.2.3; 7.2.4
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.