iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 13116:2022

(Main)

Curtain walling - Resistance to wind load - Performance requirements

Curtain walling - Resistance to wind load - Performance requirements

This document specifies the structural performance requirements of curtain walling under wind load, both its fixed and openable parts, under positive and negative static air pressure.
This document applies to any curtain walling product as defined in EN 13830.

Vorhangfassaden - Widerstand gegen Windlast - Leistungsanforderungen

Dieses Dokument legt die Bauleistungsanforderungen an sowohl ortsfeste als auch zu öffnende Teile von Vorhangfassaden unter Windlast bei positivem und negativem statischem Luftdruck fest.
Dieses Dokument gilt für alle in EN 13830 festgelegten Produkte von Vorhangfassaden.

Façade rideaux - Résistance structurelle au vent - Prescriptions de performance

No Scope Available

Obešene fasade - Odpornost proti obremenitvi z vetrom - Zahtevane lastnosti

General Information

Status
Not Published
Public Enquiry End Date
30-Dec-2022
ICS
91.060.10 - Walls. Partitions. Facades
Technical Committee
ISTP - Doors and windows
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
09-Oct-2023
Due Date
27-Nov-2023
Ref Project
FprEN 13116 - Curtain walling - Resistance to wind load - Performance requirements

Relations

Revised
SIST EN 13116:2002 - Curtain walling - Resistance to wind load - Performance requirements
Effective Date
26-Jan-2022
Revised
SIST EN 13116:2002 - Curtain walling - Resistance to wind load - Performance requirements
Effective Date
18-Jan-2023
Revised
SIST EN 13116:2002 - Curtain walling - Resistance to wind load - Performance requirements
Effective Date
19-Jan-2023

Buy Standard

prEN 13116:2022prEN 13116:2022
PreviousNext
Draft
prEN 13116:2022
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13116:2022
01-december-2022
Obešene fasade - Odpornost proti obremenitvi z vetrom - Zahtevane lastnosti
Curtain walling - Resistance to wind load - Performance requirements
Vorhangfassaden - Widerstand gegen Windlast - Leistungsanforderungen
Façade rideaux - Résistance structurelle au vent - Prescriptions de performance
Ta slovenski standard je istoveten z: prEN 13116
ICS:
91.060.10 Stene. Predelne stene. Walls. Partitions. Facades
Fasade
oSIST prEN 13116:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13116:2022

---------------------- Page: 2 ----------------------
oSIST prEN 13116:2022


DRAFT
EUROPEAN STANDARD
prEN 13116
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2022
ICS 91.060.10 Will supersede EN 13116:2001
English Version

Curtain walling - Resistance to wind load - Performance
requirements
Façade rideaux - Résistance structurelle au vent - Vorhangfassaden - Widerstand gegen Windlast -
Prescriptions de performance Leistungsanforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 33.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13116:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13116:2022
prEN 13116:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
4.1 Generalities . 5
4.2 Performance under design load . 5
4.3 Performance under increased load . 5
5 Test methods . 6
6 Classification . 6
Bibliography . 7

2

---------------------- Page: 4 ----------------------
oSIST prEN 13116:2022
prEN 13116:2022 (E)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12153:2023(Main)
Curtain walling - Air permeability - Test method
EN 12153:2023

This document defines the method to be used to determine the air permeability of curtain walling, both its fixed and openable parts. It describes how the specimen shall be tested under positive and negative air pressure.
NOTE   This document applies to any curtain walling product as defined in EN 13830.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12152:2023(Main)
Curtain walling - Air permeability - Performance requirements and classification
EN 12152:2023

This document specifies requirements and classification of air permeability of both fixed and openable parts of curtain walling, under positive and negative static air pressure.
NOTE   This document applies to curtain walling as specified in EN 13830.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14024:2023(Main)
Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
EN 14024:2023

This document specifies requirements for assessment of the mechanical strength of metal profiles incorporating a thermal barrier having mechanical performance depending on their intended use.
It also specifies the tests to determine the characteristic values of mechanical properties of the thermal barrier profile and to assess the effect of different conditionings of the thermal barrier on the mechanical performance of the connection.
Thermal barriers which do not give a contribution to the mechanical resistance of the profiles are excluded from this document.
This document applies to thermal barrier profiles designed mainly for windows, doors, screens and curtain walls. It does not apply to thermal barriers made only of metal profiles connected with metal pins or screws.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13830:2015+A1:2020/AC:2022(Corrigendum)
Curtain walling - Product standard
EN 13830:2015+A1:2020/AC:2022

This European Standard specifies requirements of curtain walling kit intended to be used as a building envelope to provide weather resistance, safety in use and energy economy and heat retention and provides test/assessments/calculation methods and compliance criteria of the related performances.
The curtain walling kit covered by this standard should fulfil its own integrity and mechanical stability but does not contribute to the load bearing or stability of the main building structure, and could be replaced independently of it.
This standard applies to curtain walling kit ranging from a vertical position to ± 15° from the vertical. Any sloping parts should be contained within the curtain walling kit.
This standard is applicable to the whole of the curtain walling kits, including the fixings.
Curtain walling according to this standard is intended to be used as part of the building envelope.
This European Standard does not include:
—   “Patent glazing” (glazed sloping roofs) kits;
—   Roof glazing constructions;
—   Façades made of precast concrete panels as part of the wall (see EN 14992).
NOTE 1   Precast concrete panels may be used in curtain walling kits as infill panels.
NOTE 2   Durability of structural sealed glazing infills is not covered by this standard.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16758:2021(Main)
Curtain walling - Determination of the strength of shear connections - Test method and requirements
EN 16758:2021

This document specifies test methods for the determination of bearing capacity (ultimate limit state and serviceability limit state), of connections between curtain walling framing members for which it cannot be calculated in accordance with current codes or conventional calculations based upon the strength of the materials.
Mechanical performances of the curtain walling connections are already assessed in accordance with the provisions described in EN 13830. Additional information with respect to mechanical performance of the connections and direct applications can be determined with this document.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13830:2015+A1:2020(Main)
Curtain walling - Product standard
EN 13830:2015+A1:2020

This European Standard specifies requirements of curtain walling kit intended to be used as a building envelope to provide weather resistance, safety in use and energy economy and heat retention and provides test/assessments/calculation methods and compliance criteria of the related performances.
The curtain walling kit covered by this standard should fulfil its own integrity and mechanical stability but does not contribute to the load bearing or stability of the main building structure, and could be replaced independently of it.
This standard applies to curtain walling kit ranging from a vertical position to ± 15° from the vertical. Any sloping parts should be contained within the curtain walling kit.
This standard is applicable to the whole of the curtain walling kits, including the fixings.
Curtain walling according to this standard is intended to be used as part of the building envelope.
This European Standard does not include:
—   “Patent glazing” (glazed sloping roofs) kits;
—   Roof glazing constructions;
—   Façades made of precast concrete panels as part of the wall (see EN 14992).
NOTE 1   Precast concrete panels may be used in curtain walling kits as infill panels.
NOTE 2   Durability of structural sealed glazing infills is not covered by this standard.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17146:2019(Main)
Determination of the strength of infill supports - Test method and requirements
EN 17146:2018

This European Standard specifies test methods for the determination of bearing capacity (ultimate limit state and serviceability limit state) of infill support which cannot be calculated in accordance with current codes or conventional calculations based upon the strength of the materials.
Mechanical performances of the infill support are already assessed while testing the glazed product or infill in regards to safety in use. Additional information with respect to mechanical performance of the infill support and direct applications can be determined with this standard.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13119:2016(Main)
Curtain walling - Terminology
EN 13119:2016

This European Standard de¬scribes terminology used in documents, drawings, specifications etc., when referring to the detailed elements of curtain wall¬ing and provides a comprehensive, though not total, list of regu¬lar terms.
It does not set out to repeat those physical definitions properly included within individual curtain walling standards related to performance requirements and associated test methods.

  • Standard
    25 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14019:2016(Main)
Curtain Walling - Impact resistance - Performance requirements
EN 14019:2016

This standard defines performance requirements of curtain walling (excluding ‘glass in building’ which is classified under EN 12600) under soft body impact load criteria specified herein and tested in accordance with EN 13049.
Its criteria is targeted to safety in use and integrity of curtain wall in the event of sudden impact forces on the curtain wall surfaces. Compliance with the performance requirement is determined by the laboratory test.
It applies to those areas of curtain walling which face onto areas of human activity, either internally or externally and takes account of accidental impacts brought on by people going about their normal daily activities and impacts brought about by equipment and similar devices for maintenance, cleaning, repair and similar occasional activities.
It does not set out to define performance requirements of impact under exceptional circumstances such as acts of vandalism, vehicular collision, firearm projectiles, etc..
This standard will have no bearing whatsoever on any National Building / Health and Safety regulations which may exist and whose requirements shall apply separately and in parallel with these test performance requirements.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13050:2011(Main)
Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
EN 13050:2011

This European Standard defines an additional test method which may be used when assessing the watertightness of curtain walling, both its fixed and openable parts. It is a supplementary test, not required for classification purposes, and it should be used only when the project specifier has determined its necessity.
It describes how the outside face of a curtain walling specimen should be subjected to a continuous spray of water and a turbulent airflow, with continuous pulses of positive air pressure on the outside of the test specimen generated from within the chamber.
This standard applies to any curtain walling product as defined in EN 13830.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day