SIST EN 2959:2019
(Main)Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners - 3 mm ≤ D ≤ 30 mm
Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners - 3 mm ≤ D ≤ 30 mm
This document specifies the requirements relating to:
Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al)
Solution treated and cold worked
Bar for forged fasteners
3 mm ≤ D ≤ 30 mm
for aerospace applications.
Luft- und Raumfahrt - Hochwarmfeste Legierung - NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Lösungsgeglüht und kaltverfestigt - Stangen zum Warmstauchschmieden für Verbindungselemente - 3 mm ≤ D ≤ 30 mm
Dieses Dokument legt die Anforderungen an:
Hochwarmfeste Legierung NI PH1302 (NiCr20Co13Mo4Ti3Al)
Lösungsgeglüht und kaltverfestigt
Stangen zum Warmstauchschmieden für Verbindungselemente
3 mm ≤ D ≤ 30 mm
für Anwendungen in der Luft- und Raumfahrt fest.
Série aérospatiale - Alliage résistant à chaud - NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Mis en solution et écroui - Barres pour éléments de fixations forgés - 3 mm ≤ D ≤ 30 mm
Aeronavtika - Toplotno odporna zlitina NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Topilno žarjena in hladno preoblikovana - Palice za kovane vezne elemente - 3 mm ≤ D ≤ 30 mm
Ta dokument določa zahteve, ki se nanašajo na:
toplotno odporne zlitine NI-PH1302 (NiCr20Co13Mo4Ti3Al),
topilno žarjene in hladno preoblikovane,
palice za kovane vezne elemente,
3 mm ≤ D ≤ 30 mm,
za uporabo v aeronavtiki.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 2959:2019
01-september-2019
Aeronavtika - Toplotno odporna zlitina NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Topilno
žarjena in hladno preoblikovana - Palice za kovane vezne elemente - 3 mm ≤ D ≤ 30
mm
Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution
treated and cold worked - Bar for forged fasteners - 3 mm ≤ D ≤ 30 mm
Luft- und Raumfahrt - Hochwarmfeste Legierung - NI-PH1302 (NiCr20Co13Mo4Ti3Al) -
Lösungsgeglüht und kaltverfestigt - Stangen zum Warmstauchschmieden für
Verbindungselemente - 3 mm ≤ D ≤ 30 mm
Série aérospatiale - Alliage résistant à chaud - NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Mis
en solution et écroui - Barres pour éléments de fixations forgés - 3 mm ≤ D ≤ 30 mm
Ta slovenski standard je istoveten z: EN 2959:2019
ICS:
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
SIST EN 2959:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 2959:2019
---------------------- Page: 2 ----------------------
SIST EN 2959:2019
EN 2959
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 49.025.15; 49.025.99
English Version
Aerospace series - Heat resisting alloy NI-PH1302
(NiCr20Co13Mo4Ti3Al) - Solution treated and cold
worked - Bar for forged fasteners - 3 mm ≤ D ≤ 30 mm
Série aérospatiale - Alliage résistant à chaud - NI- Luft- und Raumfahrt - Hochwarmfeste Legierung - NI-
PH1302 (NiCr20Co13Mo4Ti3Al) - Mis en solution et PH1302 (NiCr20Co13Mo4Ti3Al) - Lösungsgeglüht und
écroui - Barres pour éléments de fixations forgés - 3 kaltverfestigt - Stangen zum Warmstauchschmieden
mm ≤ D ≤ 30 mm für Verbindungselemente - 3 mm ≤ D ≤ 30 mm
This European Standard was approved by CEN on 6 January 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2959:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2959:2019
EN 2959:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
2
---------------------- Page: 4 ----------------------
SIST EN 2959:2019
EN 2959:2019 (E)
European foreword
This document (EN 2959:2019) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2019, and conflicting national standards shall be withdrawn
at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
Acc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.