SIST EN 12691:2006
(Main)Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact
This European Standard specifies a test for puncture by impact on sheets for roof waterproofing. Mechanical stress on waterproofing sheets ranges from static long-term loads to dynamic short-term loads. This method represents the dynamic category of load where puncture may be caused by impact.
This European Standard may also be applied for other purposes of waterproofing.
Abdichtungsbahnen - Bitumen-, Kunststoff- und Elastomerbahnen für Dachabdichtungen - Bestimmung des Widerstandes gegen stoßartige Belastung
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Perforation bei stoßartiger Belastung von
Dachbahnen fest. Die mechanische Belastung auf Bahnen verläuft von statischen Langzeitbelastungen bis zu
dynamischen Kurzzeitbelastungen. Dieses Verfahren beinhaltet die dynamische Belastung, bei der eine
Perforation durch Stoß verursacht wird.
Die Europäische Norm darf auch auf andere Abdichtungsbahnen angewandt werden.
Feuilles souples d'étanchéité - Feuilles d'étanchéité de toitures bitumineuses, plastiques et élastomeres - Détermination de la résistance au choc
La présente Norme européenne spécifie un essai de détermination de la résistance au choc des feuilles
d’étanchéité de toitures. La gamme des contraintes mécaniques exercées sur les feuilles s’étend du chargement
statique a long terme au chargement dynamique a court terme. Cet essai représente le cas d’une charge
dynamique occasionnant une perforation sous l’effet d’un choc.
Cette Norme européenne peut également etre utilisée dans d’autres domaines de l’étanchéité.
Hidroizolacijski trakovi – Bitumenski, polimerni in elastomerni trakovi za tesnjenje streh – Določanje odpornosti proti udarcu
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Bitumen-, Kunststoff- und Elastomerbahnen für Dachabdichtungen - Bestimmung des Widerstandes gegen stoßartige BelastungFeuilles souples d'étanchéité - Feuilles d'étanchéité de toitures bitumineuses, plastiques et élastomeres - Détermination de la résistance au chocFlexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 12691:2006SIST EN 12691:2006en01-maj-2006SIST EN 12691:2006SLOVENSKI
STANDARDSIST EN 12691:20011DGRPHãþD
SIST EN 12691:2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12691March 2006ICS 91.100.50Supersedes EN 12691:2001
English VersionFlexible sheets for waterproofing - Bitumen, plastic and rubbersheets for roof waterproofing - Determination of resistance toimpactFeuilles souples d'étanchéité - Feuilles d'étanchéité detoitures bitumineuses, plastiques et élastomères -Détermination de la résistance au chocAbdichtungsbahnen - Bitumen-, Kunststoff- undElastomerbahnen für Dachabdichtungen - Bestimmung desWiderstandes gegen stoßartige BelastungThis European Standard was approved by CEN on 12 January 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12691:2006: ESIST EN 12691:2006
EN 12691:2006 (E) 2 Contents Page Foreword.3 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Principle.5 5 Apparatus.5 6 Sampling.10 7 Preparation of test specimen.10 8 Procedure.10 9 Expression of results.11 10 Test report.11
SIST EN 12691:2006
EN 12691:2006 (E) 3 Foreword This European Standard (EN 12691:2006) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for waterproofing”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2006, and conflicting national standards shall be withdrawn at the latest by September 2006. This European Standard supersedes EN 12691:2001. In order to receive more precise test results a revision of the test procedure was necessary. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 12691:2006
EN 12691:2006 (E) 4 Introduction This European Standard is intended for characterisation and classification of bitumen, plastic and rubber sheets as manufactured or supplied before use. This test method relates exclusively to products or to their components where appropriate, and not to waterproofing membrane systems composed of such products and installed in the works. This test is intended to be used in conjunction with European Standards “Definitions and characteristics” for bitumen sheets and for plastic and rubber sheets for roof waterproofing. SIST EN 12691:2006
EN 12691:2006 (E) 5
1 Scope This European Standard specifies a test for puncture by impact on sheets for roof waterproofing. Mechanical stress on waterproofing sheets ranges from static long-term loads to dynamic short-term loads. This method represents the dynamic category of load where puncture may be caused by impact. This European Standard may also be applied for other purposes of waterproofing. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13163:2001, Thermal insulation products for buildings — Factory made products of expanded polystyrene (EPS) — Specification EN 13416:2001, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Rules for sampling 3 Terms and definitions For th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.