SIST EN 12209:2025
(Main)Building hardware - Mechanically operated locks and locking plates - Characteristics and test methods
Building hardware - Mechanically operated locks and locking plates - Characteristics and test methods
This document specifies product characteristics and test methods of mechanically operated locks and their locking plates:
a) for use in doors in buildings;
b) for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such doors to close reliably and thus achieve self-closing in the event of fire;
c) for use on locked fire doors to maintain the fire integrity of the door assembly.
This document covers mechanically operated locks, their locking plates which are either manufactured and placed on the market in their entirety by one producer or produced by more than one producer, or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.
This document does not cover assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies.
This document is not applicable to mechanically/electromechanically cylinders, handles, locks for windows, padlocks, locks for safes, furniture locks or prison locks.
This document does not specify multipoint locks or their locking plates which are specified by prEN 15685.
Schlösser und Baubeschläge - Mechanisch betätigte Schlösser und Schließbleche - Anforderungen und Prüfverfahren
Dieses Dokument legt Produktmerkmale und Prüfverfahren für mechanisch betätigte Schlösser und deren Schließbleche fest:
a) zur Verwendung an Türen in Gebäuden;
b) zur Verwendung an Türen zwischen Brand und Rauchabschnitten, die mit Türschließmitteln ausgestattet sind, damit diese Türen zuverlässig schließen und ein selbsttätiges Schließen im Brandfall erreicht wird;
c) zur Verwendung an verschlossenen Brandschutztüren, um den Raumabschluss der Tür aufrechtzuerhalten.
Dieses Dokument umfasst mechanisch betätigte Schlösser und deren Schließbleche, die entweder in ihrer Gesamtheit durch einen oder mehrere Hersteller gefertigt und in den Handel gebracht werden oder durch mehr als einen Hersteller aus Baugruppen montiert werden und dazu ausgelegt sind, als Kombination verwendet zu werden.
Dieses Dokument umfasst nicht die Bewertung des Produktbeitrags zum Feuerwiderstand von bestimmten Feuerschutz und/oder Rauchschutztürelementen.
Dieses Dokument ist nicht anwendbar auf mechanische/elektromechanische Zylinder, Griffe, Schlösser für Fenster, Hangschlösser, Schlösser für Safes, Möbelschlösser oder Gefängnisschlösser.
Dieses Dokument trifft keine Festlegungen für Mehrfachverriegelungen und deren Schließbleche, die in prEN 15685 behandelt werden.
Quincaillerie pour le bâtiment - Serrures mécaniques et gâches - Exigences et méthodes d'essai
Le présent document spécifie les caractéristiques du produit et les méthodes d'essai des serrures à commande mécanique et de leurs gâches :
a) sur des portes de bâtiments ;
b) sur des portes de compartimentation coupe-feu et pare-fumées équipées de dispositifs de fermeture, pour permettre à ces portes de se fermer de manière fiable et garantir ainsi leur fermeture automatique en cas d'incendie ;
c) sur des portes coupe-feu verrouillées pour assurer l'intégrité du bloc-porte.
Le présent document couvre les serrures à commande mécanique et leurs gâches qui sont soit fabriquées et mises sur le marché dans leur intégralité par un seul fabricant, soit produites par plusieurs fabricants, soit assemblées à partir de sous-ensembles produits par plusieurs fabricants et conçus pour être combinés.
Le présent document ne couvre pas l’évaluation de la contribution du produit à la résistance au feu des blocs-portes coupe-feu et/ou pare-fumée spécifiques.
Le présent document ne s'applique pas aux cylindres mécaniques/électromécaniques, aux béquilles et boutons de porte, aux cadenas, aux serrures de coffre-fort, aux serrures de mobiliers ou de prison.
Le présent document ne spécifie pas les serrures multipoints et leurs gâches, qui sont définies dans le prEN 15685.
Stavbno okovje - Mehanske ključavnice in prijemniki - Značilnosti in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 12209:2019
01-november-2019
Stavbno okovje - Mehanske ključavnice in prijemniki - Značilnosti in preskusne
metode
Building hardware - Mechanically operated locks and locking plates - Characteristics and
test methods
Schlösser und Baubeschläge - Mechanisch betätigte Schlösser und Schließbleche -
Anforderungen und Prüfverfahren
Quincaillerie pour le bâtiment - Serrures mécaniques et gâches - Exigences et méthodes
d'essai
Ta slovenski standard je istoveten z: prEN 12209
ICS:
91.190 Stavbna oprema Building accessories
oSIST prEN 12209:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 12209:2019
oSIST prEN 12209:2019
DRAFT
EUROPEAN STANDARD
prEN 12209
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2019
ICS 91.190 Will supersede EN 12209:2016
English Version
Building hardware - Mechanically operated locks and
locking plates - Requirements and test methods
Quincaillerie pour le bâtiment - Serrures mécaniques Schlösser und Baubeschläge - Mechanisch betätigte
et gâches - Exigences et méthodes d'essai Schlösser und Schließbleche - Anforderungen und
Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 33.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12209:2019 E
worldwide for CEN national Members.
oSIST prEN 12209:2019
prEN 12209:2019 (E)
Contents Page
European foreword . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Symbols and abbreviations . 9
4 Product characteristics . 10
4.1 General . 10
4.2 Category of use (first digit) . 11
4.3 Durability characteristics (second digit). 14
4.4 Door mass and door closing force (third digit) . 15
4.5 Suitability for use on fire resistance and/or smoke control door set (fourth digit) . 16
4.6 Safety (fifth digit) . 17
4.7 Corrosion resistance and temperature (sixth digit) . 17
4.8 Security (seventh digit) . 17
4.9 Key identification characteristics of lever locks (eight digit) . 28
5 Test, assessment and sampling methods . 29
5.1 General . 29
5.2 Test apparatus. 30
5.3 Test procedure - Drilling procedure . 30
5.4 Test methods - general . 31
5.5 Test methods - Category of use . 32
5.6 Test methods - durability . 35
5.7 Door mass and closing force . 40
5.8 Suitability for use on fire resistance and/or smoke control door set . 41
5.9 Safety . 41
5.10 Corrosion resistance and temperature . 41
5.11 Security . 42
5.12 Key related security for lever locks . 55
6 Assessment and verification of constancy of performance – AVCP. 56
6.1 General . 56
6.2 Type testing . 56
6.3 Factory production control (FPC) . 59
7 Classification . 63
7.1 Coding system . 63
7.2 Classification for mechanically operated locks and locking plates . 64
7.3 Example for classification of locks, latches and locking plates . 67
8 Marking, labelling and packaging . 67
8.1 On the product . 67
8.2 On the packaging and literature . 67
Annex A (normative) Test sampling and sequencing for locks and latches . 68
Annex B (informative) Product information . 72
oSIST prEN 12209:2019
prEN 12209:2019 (E)
Annex ZA (informative) Relationship of this European Standard with Regulation (EU)
No.305/2011 . 74
Bibliography . 77
oSIST prEN 12209:2019
prEN 12209:2019 (E)
European foreword
This document (prEN 12209:2019) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This document will supersede EN 12209:2016.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association, and supports basic work requirements of
EU Regulation(s).
For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral
part of this document.
This document is one of a series of European Standards dedicated to building hardware products.
European Standards for electromechanically operated locks and locking plates (EN 14846) and for
mechanically operated multi-point locks (prEN 15685) are also available.
The performance tests incorporated in this document are considered to be reproducible and as such
provide a consistent and objective assessment of the performance of these products for all CEN
Members.
The major changes in this revision from version 2016 are as follows:
• Introduction deleted;
• Clause 4 changed from requirements to characteristics;
• Figures clarified;
• Durability grades changed from threshold value to range;
• Annex A moved to subclauses 4.5, 5.8 and 7.2.4;
• The previous Annex B is now modified in the new Annex A;
• The previous Annex C is now modified in the new Annex B;
• Annex ZA is updated based on the agreed CEN template.
Changes from version 2004 to version 2016 related to essential characteristics:
• The following clauses were re-numbered without any change of performance:
o Self closing ability changed to Self closing – ability to close and keep the door in closed position;
▪ Return force of latch bolt, from 5.1.2 to 4.1.3;
▪ Closing force, from 5.4.2 to 4.4.2 Door closing force;
o Durability of self closing action changed to Durability of self closing against aging and degradation;
oSIST prEN 12209:2019
prEN 12209:2019 (E)
▪ Durability of latch action, from 5.3.1 to 4.3.1;
o Ability to maintain door in closed position and not contribute the spread of fire changed to
Sustainability for use on fire resistance and/or smoke control door set;
▪ Suitability for use on fire/smoke doors, from 5.5 to 4.5 Sustainability for use on fire resistance
and/or smoke control door set;
o Control of dangerous substances changed to Dangerous substances;
▪ Dangerous substances, from 5.1.1 to 4.1.2.
oSIST prEN 12209:2019
prEN 12209:2019 (E)
1 Scope
This document specifies product characteristics and test methods of mechanically operated locks and
their locking plates:
a) for use in doors in buildings;
b) for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such
doors to close reliably and thus achieve self-closing in the event of fire;
c) for use on locked fire doors to maintain the fire integrity of the door assembly.
This document covers mechanically operated locks, their locking plates which are either manufactured
and placed on the market in their entirety by one producer or produced by more than one producer, or
assembled from sub-assemblies produced by more than one producer and designed to be used in
combination.
This document does not cover assessment of the contribution of the product to the fire resistance of
specific fire resistance and/or smoke control door set assemblies.
This document is not applicable to mechanically/electromechanically cylinders, handles, locks for
windows, padlocks, locks for safes, furniture locks or prison locks.
This document does not specify multipoint locks or their locking plates which are specified by
prEN 15685.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1303, Building hardware - Cylinders for locks - Characteristics and test methods
EN 1634-1, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and
elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable
windows
EN 1634-2, Fire resistance and smoke control tests for door, shutter and openable window assemblies and
elements of building hardware - Part 2: Fire resistance characterisation test for elements of building
hardware
EN 1634-3, Fire resistance and smoke control tests for door and s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.