SIST EN 50144-2-10:1999

Safety of hand-held electric motor operated tools -- Part 2-10: Particular requirements for jig saws

This clause of Part 1 is applicable except as follows:     1.1 Addition: This standard applies to jig saws.     NOTE - This standard does not apply to sabre saws.

Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-10: Besondere Anforderungen an Stichsägen

Sécurité des outils électroportatifs à moteur -- Partie 2-10: Règles particulières pour les scies sauteuses

Safety of hand-held electric motor operated tools - Part 2-10: Particular requirements for jig saws

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-1999
• Withdrawal Date: 30-Apr-2002
• ICS: 25.080.60 - Sawing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: VGA - Safety of household and similar electrical appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-May-2002
• Due Date: 01-May-2002
• Completion Date: 01-May-2002
• Mandate: M/083 - Machinery
• Ref Project: EN 50144-2-10:1996 - Safety of hand-held electric motor operated tools - Part 2-10: Particular requirements for jig saws

Relations

• Revised: SIST EN 50144-2-10:2002 - Safety of hand-held electric motor operated tools -- Part 2-10: Particular requirements for jig saws
• Effective Date: 13-May-2010
• Replaced By: SIST EN 50144-2-10:2002 - Safety of hand-held electric motor operated tools -- Part 2-10: Particular requirements for jig saws
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN 50144-2-10:2002 - Safety of hand-held electric motor operated tools -- Part 2-10: Particular requirements for jig saws
• Effective Date: 07-Jun-2022
• Replaces: SIST HD 400.3J S1:1995 - Hand-held motor operated tools -- Part II: Particular specifications -- Section J: Jig saws
• Effective Date: 06-May-2014
• Replaces: SIST HD 400.3J S1:1995 - Hand-held motor operated tools -- Part II: Particular specifications -- Section J: Jig saws
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50144-2-10:1999
01-julij-1999
1DGRPHãþD
SIST HD 400.3J S1:1995
Safety of hand-held electric motor operated tools - Part 2-10: Particular
requirements for jig saws
Safety of hand-held electric motor operated tools -- Part 2-10: Particular requirements for
jig saws
Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-10: Besondere
Anforderungen an Stichsägen
Sécurité des outils électroportatifs à moteur -- Partie 2-10: Règles particulières pour les
scies sauteuses
Ta slovenski standard je istoveten z: EN 50144-2-10:1996
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 50144-2-10:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50144-2-10:1999

--------
...