SIST EN 301 908-6 V3.2.1:2008
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 6: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 6: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
The present document applies to the following radio equipment type:
User equipment for IMT-2000 CDMA TDD (UTRA TDD).
IMT-2000 CDMA TDD (UTRA TDD) supports two options of the TDD mode with the chip rates of 3,84 Mcps and 1,28 Mcps. These two options are called the 3,84 Mcps TDD option and the 1,28 Mcps TDD option respectively. The requirements are listed in different subsections only if the parameters deviate. The present document covers requirements for 3,84 Mcps TDD option user equipment for Release 99, 4, 5, 6 and 7 and for 1,28 Mcps TDD option user equipment for Release 4, 5, 6 and 7. The present document covers the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS), ponavljalniki (repetitorji) in uporabniška oprema (UE) za celična omrežja tretje generacije IMT-2000 - 6. del: Harmonizirani EN za IMT-2000, CDMA TDD (UTRA TDD) (UE), ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 908-6 V3.2.1:2008
01-marec-2008
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50 %D]QH
SRVWDMH %6 SRQDYOMDOQLNL UHSHWLWRUML LQXSRUDEQLãNDRSUHPD 8( ]DFHOLþQD
RPUHåMDWUHWMHJHQHUDFLMH,07GHO +DUPRQL]LUDQL(1]D,07&'0$
7'' 875$7'' 8( NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS),
Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks -
Part 6: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 908-6 Version 3.2.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 908-6 V3.2.1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 908-6 V3.2.1:2008
---------------------- Page: 2 ----------------------
SIST EN 301 908-6 V3.2.1:2008
ETSI EN 301 908-6 V3.2.1 (2007-09)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 6: Harmonized EN for IMT-2000,
CDMA TDD (UTRA TDD) (UE)
covering essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 3 ----------------------
SIST EN 301 908-6 V3.2.1:2008
2 ETSI EN 301 908-6 V3.2.1 (2007-09)
Reference
REN/ERM-TFES-003-6
Keywords
3G, 3GPP, cellular, digital, IMT-2000, mobile,
radio, regulation, TDD, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2007.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 908-6 V3.2.1:2008
3 ETSI EN 301 908-6 V3.2.1 (2007-09)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .7
1 Scope.8
2 References.8
3 Definitions, symbols and abbreviations .9
3.1 Definitions.9
3.2 Symbols.10
3.3 Abbreviations.10
4 Technical requirements specifications .11
4.1 Environmental profile.11
4.2 Conformance requirements.11
4.2.1 Introduction.11
4.2.2 Spectrum emission mask.11
4.2.2.1 Definition.11
4.2.2.1.1 3,84 Mcps TDD option.11
4.2.2.1.2 1,28 Mcps TDD option.12
4.2.2.2 Limits.12
4.2.2.2.1 3,84 Mcps TDD option.12
4.2.2.2.2 1,28 Mcps TDD option.13
4.2.2.3 Conformance.13
4.2.3 Transmitter spurious emissions.13
4.2.3.1 Definition.13
4.2.3.2 Limits.13
4.2.3.2.1 3,84 Mcps TDD option.13
4.2.3.2.2 1,28 Mcps TDD option.14
4.2.3.3 Conformance.14
4.2.4 Maximum output power.14
4.2.4.1 Definition.14
4.2.4.2 Limits.14
4.2.4.3 Conformance.15
4.2.5 Minimum transmit output power .15
4.2.5.1 Definition.15
4.2.5.2 Limits.15
4.2.5.2.1 3,84 Mcps TDD option.15
4.2.5.2.2 1,28 Mcps TDD option.15
4.2.5.3 Conformance.15
4.2.6 Receiver spurious emissions.15
4.2.6.1 Definition.15
4.2.6.2 Limits.15
4.2.6.2.1 3,84 Mcps TDD option.15
4.2.6.2.2 1,28 Mcps TDD option.16
4.2.6.3 Conformance.16
4.2.7 Receiver blocking characteristics .16
4.2.7.1 Definition.16
4.2.7.2 Limits.16
4.2.7.2.1 3,84 Mcps TDD option.16
4.2.7.2.2 1,28 Mcps TDD option.17
4.2.7.3 Conformance.18
4.2.8 Receiver intermodulation characteristics .18
4.2.8.1 Definition and applicability.18
4.2.8.2 Limits.18
4.2.8.2.1 3,84 Mcps TDD option.18
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 908-6 V3.2.1:2008
4 ETSI EN 301 908-6 V3.2.1 (2007-09)
4.2.8.2.2 1,28 Mcps TDD option.19
4.2.8.3 Conformance.19
4.2.9 Receiver spurious response.19
4.2.9.1 Definition.19
4.2.9.2 Limits.19
4.2.9.2.1 3,84 Mcps TDD option.19
4.2.9.2.2 1,28 Mcps TDD option.20
4.2.9.3 Conformance.20
4.2.10 Receiver adjacent channel selectivity .20
4.2.10.1 Definition.20
4.2.10.2 Limits.20
4.2.10.2.1 3,84 Mcps TDD option.20
4.2.10.2.2 1,28 Mcps TDD option.20
4.2.10.3 Conformance.21
4.2.11 Out-of-synchronization handling of output power.21
4.2.11.1 Definition.21
4.2.11.2 Limit.21
4.2.11.2.1 3,84 Mcps TDD option.21
4.2.11.2.2 1,28 Mcps TDD option.22
4.2.11.3 Conformance.23
4.2.12 Transmitter adjacent channel leakage power ratio.23
4.2.12.1 Definition.23
4.2.12.2 Limits.23
4.2.12.2.1 3,84 Mcps TDD option.23
4.2.12.2.2 1,28 Mcps TDD option.23
4.2.12.3 Conformance.24
5 Testing for compliance with technical requirements.24
5.1 Environmental conditions for testing .24
5.2 Interpretation of the measurement results .24
5.3 Essential radio test suites.26
5.3.1 Spectrum emission mask.26
5.3.1.1 Method of test .26
5.3.1.1.1 Initial conditions.26
5.3.1.1.2 Procedure.26
5.3.1.2 Test requirements.26
5.3.2 Transmitter spurious emissions.27
5.3.2.1 Method of test .27
5.3.2.1.1 Initial conditions.27
5.3.2.1.2 Procedure.27
5.3.2.2 Test requirements.27
5.3.3 Maximum output power.27
5.3.3.1 Method of test .27
5.3.3.1.1 Initial conditions.27
5.3.3.1.2 Procedure.28
5.3.3.2 Test requirements.28
5.3.4 Minimum transmit output power .28
5.3.4.1 Method of test .28
5.3.4.1.1 Initial conditions.28
5.3.4.1.2 Procedure.28
5.3.4.2 Test requirements.28
5.3.5 Receiver spurious emissions.29
5.3.5.1 Method of test .29
5.3.5.1.1 Initial conditions.29
5.3.5.1.2 Procedure.29
5.3.5.2 Test requirements.30
5.3.6 Receiver blocking characteristics .30
5.3.6.1 Method of test .30
5.3.6.1.1 Initial conditions.30
5.3.6.1.2 Procedure.30
5.3.6.2 Test requirements.31
5.3.7 Receiver intermodulation characteristics .31
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 908-6 V3.2.1:2008
5 ETSI EN 301 908-6 V3.2.1 (2007-09)
5.3.7.1 Method of test .31
5.3.7.1.1 Initial conditions.31
5.3.7.1.2 Procedure.31
5.3.7.2 Test requirements.31
5.3.8 Receiver spurious response.31
5.3.8.1 Method of test .31
5.3.8.1.1 Initial conditions.31
5.3.8.1.2 Procedure.32
5.3.8.2 Test requirements.32
5.3.9 Receiver adjacent channel selectivity .32
5.3.9.1 Method of test .32
5.3.9.1.1 Initial conditions.32
5.3.9.1.2 Procedure.32
5.3.9.2 Test requirements.32
5.3.10 Out-of-synchronization handling of output power.33
5.3.10.1 Method of test .33
5.3.10.1.1 Initial conditions.33
5.3.10.1.2 Procedure.33
5.3.10.1.2.1 3,84 Mcps TDD option .33
5.3.10.1.2.2 1,28 Mcps TDD option .33
5.3.10.2 Test requirements.34
5.3.11 Transmitter adjacent channel leakage power ratio.34
5.3.11.1 Method of test .34
5.3.11.1.1 Initial conditions.34
5.3.11.1.2 Procedure.34
5.3.11.2 Test requirements.34
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).35
Annex B (informative): Environmental profile .37
B.1 General.37
B.1.1 Introduction.37
B.1.2 Temperature.37
B.1.3 Voltage.37
B.1.4 Test environment.38
Annex C (informative): Bibliography.39
Annex D (informative): The EN title in the official languages .40
History .42
ETSI
---------------------- Page: 7 ----------------------
SIST EN 301 908-6 V3.2.1:2008
6 ETSI EN 301 908-6 V3.2.1 (2007-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The present document is part 6 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User
Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.