SIST EN 13087-3:2000/A1:2002

Protective helmets - Test methods - Part 3: Resistance to penetration

UAP of 4 months (TC Res C165/2000) (CC/01011)

Schutzhelme - Prüfverfahren - Teil 3: Durchdringungsfestigkeit

Casques de protection - Méthodes d'essai - Partie 3: Résistance a la pénétration

Varovalne čelade - Preskusne metode - 3. del: Odpornost proti prediranju

General Information

• Status: Published
• Publication Date: 31-May-2002
• ICS: 13.340.20 - Head protective equipment
• Technical Committee: OVP - Personal protecting equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jun-2002
• Due Date: 01-Jun-2002
• Completion Date: 01-Jun-2002
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: EN 13087-3:2000/A1:2001 - Protective helmets - Test methods - Part 3: Resistance to penetration

Relations

• Amends: SIST EN 13087-3:2000 - Protective helmets - Test methods - Part 3: Resistance to penetration
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13087-3:2000/A1:2002
01-junij-2002
9DURYDOQHþHODGH3UHVNXVQHPHWRGHGHO2GSRUQRVWSURWLSUHGLUDQMX
Protective helmets - Test methods - Part 3: Resistance to penetration
Schutzhelme - Prüfverfahren - Teil 3: Durchdringungsfestigkeit
Casques de protection - Méthodes d'essai - Partie 3: Résistance a la pénétration
Ta slovenski standard je istoveten z: EN 13087-3:2000/A1:2001
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
SIST EN 13087-3:2000/A1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 13087-3:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2001
ICS 13.340.20
English version
Protective helmets - Test methods - Part 3: Resistance to
penetration
Casques de protection - Méthodes d'essai - Partie 3: Schutzhelme - Prüfverfahren - Teil 3:
Résistance à la pénétration Durchdringungsfestigkeit
This amendment A1 modifies the European Standard EN 13087-3:2000; it was approved by CEN on 21 October 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13087-3:2000/A1:2001 E
worldwide for CEN national Members.

------------
...