oSIST prEN IEC 62561-2:2024
(Main)Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes
Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes
Blitzschutzsystembauteile (LPSC) - Teil 2: Anforderungen an Leiter und Erder
Composants des systèmes de protection contre la foudre (CSPF) - Partie 2: Exigences pour les conducteurs et les électrodes de terre
Elementi za zaščito pred strelo (LPSC) - 2. del: Zahteve za vodnike in ozemljila
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Elementi za zaščito pred strelo (LPSC) - 2. del: Zahteve za vodnike in ozemljila
Lightning protection system components (LPSC) - Part 2: Requirements for conductors
and earth electrodes
Blitzschutzsystembauteile (LPSC) - Teil 2: Anforderungen an Leiter und Erder
Composants des systèmes de protection contre la foudre (CSPF) - Partie 2: Exigences
pour les conducteurs et les électrodes de terre
Ta slovenski standard je istoveten z: prEN IEC 62561-2:2024
ICS:
91.120.40 Zaščita pred strelo Lightning protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
81/771/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62561-2 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-08-02 2024-10-25
SUPERSEDES DOCUMENTS:
81/754/CD, 81/765A/CC
IEC TC 81 : LIGHTNING PROTECTION
SECRETARIAT: SECRETARY:
Italy Mrs Marina Bernardi
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 37A,TC 64,TC 88
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the
final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Lightning protection system components (LPSC) - Part 2: Requirements for conductors and
earth electrodes
PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
IEC CDV 62561-2 © IEC 2024 2 81/771/CDV
1 CONTENTS
2 CONTENTS . 2
3 FOREWORD . 5
4 INTRODUCTION . 7
5 1 Scope . 8
6 2 Normative references . 8
7 3 Terms and definitions . 8
8 4 Requirements . 11
9 4.1 General . 11
10 4.2 Documentation and installation instructions . 11
11 4.3 Air-termination conductors, air-termination rods, catenary wires and down
12 conductors . 11
13 4.4 Earth electrodes . 14
14 4.4.1 General . 14
15 4.4.2 Earth conductors . 14
16 4.4.3 Earth rods. 15
17 4.4.4 Earth plates and equipotential earth grids . 15
18 4.4.5 Couplers for earth rods . 15
19 4.5 Earth lead-in conductors . 16
20 4.6 Marking . 16
21 4.6.1 Content of marking . 16
22 4.6.2 Durability and legibility. 17
23 5 Tests . 19
24 5.1 General test conditions . 19
25 5.2 Air-termination conductors, air-termination rods, catenary wires, down
26 conductors, earth lead-in conductors, earth conductors, earth plates and
27 equipotential earth grids . 19
28 5.2.1 General . 19
29 5.2.2 Test for thickness of coating . 20
30 5.2.3 Resistance test for coated conductors . 22
31 5.2.4 Bending test for coated conductors . 22
32 5.2.5 Environmental test for coated conductors . 22
33 5.2.6 Electrical resistivity test . 23
34 5.2.7 Tensile strength test . 23
35 5.2.8 Material, configuration and cross-sectional area test . 24
36 5.3 Earth rods . 24
37 5.3.1 General . 24
38 5.3.2 Test for thickness of coating on earth rods . 24
39 5.3.3 Adhesion test for copper coated earth rods . 24
40 5.3.4 Electrical resistance test for coated earth rods . 25
41 5.3.5 Bending test for copper coated steel earth rods . 26
42 5.3.6 Environmental test for coated earth rods . 26
43 5.3.7 Electrical resistivity test for earth rods . 26
44 5.3.8 Tensile strength test for earth rods . 27
45 5.3.9 Test for yield/tensile ratio for copper coated steel earth rods . 27
46 5.3.10 Material, configuration and cross-sectional area test for earth rods . 28
47 5.4 Couplers for earth rods . 28
48 5.4.1 General . 28
49 5.4.2 Compression test by mechanical means . 28
50 5.4.3 Environmental test . 30
IEC CDV 62561-2 © IEC 2024 3 81/771/CDV
51 5.4.4 Lightning current test . 30
52 5.4.5 Tensile strength test for couplers of earth rods . 30
53 5.4.6 Material, configuration and cross-sectional area test for couplers for
54 earth rods . 30
55 5.5 Marking test . 31
56 5.5.1 General test conditions . 31
57 5.5.2 Acceptance criteria . 31
58 5.6 Documentation and installation instructions . 31
59 5.6.1 General test conditions . 31
60 5.6.2 Acceptance criteria . 31
61 6 Electromagnetic compatibility (EMC) . 31
62 7 Structure and content of the test report. 31
63 7.1 General . 31
64 7.2 Report identification . 31
65 7.3 Specimen description . 32
66 7.4 Conductor . 32
67 7.5 Standards and references . 32
68 7.6 Test procedure. 32
69 7.7 Testing equipment description . 32
70 7.8 Measuring instruments description . 32
71 7.9 Results and parameters recorded . 33
72 7.10 Statement of pass or fail . 33
73 Annex A (normative) Environmental test . 34
74 A.1 General . 34
75 A.2 Salt mist treatment . 34
76 A.3 Humid sulphurous atmosphere treatment . 34
77 A.4 Ammonia atmosphere treatment . 34
78 Annex B (normative) Lightning current test . 35
79 B.1 General . 35
80 B.2 Acceptance criteria . 35
81 Annex C (normative) Requirements and tests for air-termination conductors, air-
82 termination rods, catenary wires and down conductors . 36
83 Annex D (normative) Requirements and tests for earth lead-in conductors, earth
84 electrodes, equipotential earth grids and couplers for earth rods . 37
85 Annex E Figure E.1 (normative) Flow chart of tests for air-termination conductors, air-
86 termination rods, catenary wires, earth lead-in conductors, down-conductors,
87 earth conductors and equipotential earth grids see Figure E.1 . 39
88 Annex F (normative) Flow chart of tests for earth rods . 40
89 Annex G (normative) Flow chart of tests of couplers for earth rods . 41
90 Annex H Material, configuration and cross-sectional area test . 42
91 H.1 Acceptance criteria for air-termination conductors, air-termination rods,
92 catenary wires, and down conductors . 42
93 H.2 Acceptance criteria for earth lead-in conductors, earth electrodes,
94 equipotential earth grids earth rods and couplers for earth rods . 42
95 Annex I (normative) Applicability of previous tests . 43
96 Bibliography . 44
97 Figure 1 – Coating measurements around the circumference of a round conductor . 20
98 Figure 2 – Coating measurements of a plate conductor . 21
99 Figure 3 – Typical test arrangement for adhesion test . 25
100 Figure 4 – Definitions of upper yield strength R and tensile strength R . 28
eH m
IEC CDV 62561-2 © IEC 2024 4 81/771/CDV
101 Figure 5 – Typical t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.