oSIST prEN ISO 4035:2022

Fasteners - Hexagon thin nuts (style 0) (ISO/DIS 4035:2022)

Mechanische Verbindungselemente – Niedrige Sechskantmuttern (Typ 0) (ISO/DIS 4035:2022)

Diese Internationale Norm legt Eigenschaften von flachen Sechskantmuttern (Typ 0) mit Grobgewinde mit Durchmessern von M1,6 bis M64, in Produktklasse A für Durchmesser ≤ M16 und Produktklasse B für Durchmesser > M16, fest.
Flache Muttern, die als Kontermuttern eingesetzt werden, müssen zusammen mit einer normalen oder hohen Mutter montiert werden.
WARNUNG — Flache Muttern (Typ 0) haben im Vergleich zu normalen oder hohen Muttern eine reduzierte Ladekapazität und bieten keinen Widerstand gegen das Abstreifen vom Gewinde (siehe ISO 898-2).

Fixations - Écrous bas hexagonaux (style 0) (ISO/DIS 4035:2022)

Vezni elementi - Šestrobe nizke matice (tip 0) (ISO/DIS 4035:2022)

General Information

• Status: Not Published
• Public Enquiry End Date: 11-Jul-2022
• ICS: 21.060.20 - Nuts
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 14-Jun-2024
• Due Date: 19-Jun-2024
• Completion Date: 14-Jun-2024
• Ref Project: prEN ISO 4035 - Hexagon thin nuts (style 0), chamfered - Product grades A and B (ISO/DIS 4035:2016)

Relations

• Revised: SIST EN ISO 4035:2013 - Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)
• Effective Date: 19-Jan-2023
• Revised: SIST EN ISO 4035:2013 - Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)
• Effective Date: 18-Jan-2023
• Revised: SIST EN ISO 4035:2013 - Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)
• Effective Date: 04-Nov-2020

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 4035:2022
01-junij-2022
Vezni elementi - Šestrobe nizke matice (tip 0) (ISO/DIS 4035:2022)
Fasteners - Hexagon thin nuts (style 0) (ISO/DIS 4035:2022)
Mechanische Verbindungselemente – Niedrige Sechskantmuttern (Typ 0) (ISO/DIS
4035:2022)
Fixations - Écrous bas hexagonaux (style 0) (ISO/DIS 4035:2022)
Ta slovenski standard je istoveten z: prEN ISO 4035
ICS:
21.060.20 Matice Nuts
oSIST prEN ISO 4035:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 4035:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 4035:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4035
ISO/TC 2/SC 12 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-04-20 2022-07-13
Fasteners — Hexagon thin nuts (style 0)
Fixations — Écrous bas hexagonaux (style 0)
ICS: 21.060.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 4035:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 4035:2022
ISO/DIS 4035:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 4035:2022
ISO/DIS 4035:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensions .2
5 Requirements and reference International Standards . 3
6 Marking and labelling . 5
6.1 Marking on product . . 5
6.2 Labelling on package . 5
7 Designation . 5
Annex A (normative) Nuts with D < M5 and D > M39, not included in ISO 898-2 .6
Bibliography .
...