SIST-TS CEN/TS 15403:2007

Solid recovered fuels - Methods for the determination of ash content

This Technical Specification specifies a method for the determination of ash content of all solid recovered fuels.

Feste Sekundärbrennstoffe - Verfahren zur Bestimmung des Aschegehaltes

Combustibles solides de récupération - Méthodes pour la détermination de la teneur en cendre

Trdno alternativno gorivo - Metode za določevanje pepela

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2007
• Withdrawal Date: 28-Mar-2011
• ICS: 75.160.10 - Solid fuels
• Technical Committee: AGO - Refuse derived fuel
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 18-Mar-2011
• Due Date: 10-Apr-2011
• Completion Date: 29-Mar-2011
• Mandate: M/325 - Mandate to CEN on Solid Recovered Fuels (SRF)
• Ref Project: CEN/TS 15403:2006 - Solid recovered fuels - Methods for the determination of ash content

Relations

• Replaced By: SIST EN 15403:2011 - Solid recovered fuels - Determination of ash content
• Effective Date: 01-May-2011
• Replaced By: SIST EN 15403:2011 - Solid recovered fuels - Determination of ash content
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15403:2007
01-marec-2007
7UGQRDOWHUQDWLYQRJRULYR0HWRGH]DGRORþHYDQMHSHSHOD
Solid recovered fuels - Methods for the determination of ash content
Feste Sekundärbrennstoffe - Verfahren zur Bestimmung des Aschegehaltes
Combustibles solides de récupération - Méthodes pour la détermination de la teneur en
cendre
Ta slovenski standard je istoveten z: CEN/TS 15403:2006
ICS:
75.160.10 Trda goriva Solid fuels
SIST-TS CEN/TS 15403:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

TECHNICAL SPECIFICATION
CEN/TS 15403
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
October 2006
ICS 75.160.10

English Version
Solid recovered fuels - Methods for the determination of ash
content
Combustibles solides de récupération - Méthodes pour la Feste Sekundärbrennstoffe - Verfahren zur Bestimmung
détermination de la teneur en cendre des Aschegehaltes
This Technical Specification (CEN/TS) was approved by CEN on 25 March 2006 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15403:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

CEN/TS 15403:2006 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Principle.5
5 Apparatus .5
6 Sampling and sample preparation.6
7 Procedure .6
8 Calculation.6
9 Precision.7
10 Test report .7
Bibliography .8

2

---------------------- Page: 3 ----------------------

CEN/TS 15403:2006 (E)
Foreword

This document (CEN/TS 15403:2006) has been prepared by Technical Committee CEN/TC 343 “Solid
recovered fuels”, the secretariat of which is held by SFS.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.

3

---------------------- Page: 4 ----------------------

CEN/TS 15403:2006 (E)
Introduction
This Technical Specification covers the determination of ash content of solid recovered fuels. It is primarily
geared toward laboratories, producers, suppliers and purchasers of solid recovered fuels but is also useful for
the authorities and inspection organizations.
The method specified in this Technical Specification is based on CEN/TS 14775 [1] as well as ISO 1171 [2].
4

---------------------- Page: 5 ----------------------

CEN/TS 15403:2006 (E)
1 Scope
This Technical Specification specifies a method for the determination of ash content of all solid recovered
fuels.
2 Normative references
The following referenced documents are indispensable for the application of this Technical Specification. For
dated references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
CEN/TS 15357:2006,
...