SIST EN 15403:2011
(Main)Solid recovered fuels - Determination of ash content
Solid recovered fuels - Determination of ash content
This European Standard specifies a method for the determination of ash content of all solid recovered fuels.
Feste Sekundärbrennstoffe - Bestimmung des Aschegehaltes
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Aschegehaltes sämtlicher festen Sekundärbrennstoffe
fest.
Combustibles solides de récupération - Détermination de la teneur en cendres
Le présent document spécifie une méthode de détermination de la teneur en cendres de tous les
combustibles solides de récupération.
Trdna alternativna goriva - Določevanje vsebnosti pepela
Ta evropski standard določa metodo za določevanje vsebnosti pepela v vseh trdnih alternativnih gorivih.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Feste Sekundärbrennstoffe - Bestimmung des AschegehaltesCombustibles solides de récupération - Détermination de la teneur en cendresSolid recovered fuels - Determination of ash content75.160.10Trda gorivaSolid fuelsICS:Ta slovenski standard je istoveten z:EN 15403:2011SIST EN 15403:2011en,de01-maj-2011SIST EN 15403:2011SLOVENSKI
STANDARDSIST-TS CEN/TS 15403:20071DGRPHãþD
SIST EN 15403:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15403
March 2011 ICS 75.160.10 Supersedes CEN/TS 15403:2006English Version
Solid recovered fuels - Determination of ash content
Combustibles solides de récupération - Détermination de la teneur en cendre
Feste Sekundärbrennstoffe - Bestimmung des Aschegehaltes This European Standard was approved by CEN on 22 January 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15403:2011: ESIST EN 15403:2011
EN 15403:2011 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Terms and definitions .54Principle .55Apparatus .56Sampling and sample preparation .67Procedure .68Calculation .69Precision .710Test report .7Annex A (informative)
Interlaboratory test results .8Bibliography . 11 SIST EN 15403:2011
EN 15403:2011 (E) 3 Foreword This document (EN 15403:2011) has been prepared by Technical Committee CEN/TC 343 “Solid recovered fuels”, the secretariat of which is held by SFS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall be withdrawn at the latest by September 2011. This document supersedes CEN/TS 15403:2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document differs from CEN/TS 15403:2006 mainly as follows: a) use of automatic equipments under specific conditions permitted; b) results of interlaboratory tests supplemented as an informative Annex A; c) whole document editorially revised. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 15403:2011
EN 15403:2011 (E) 4 Introduction This European Standard covers the determination of ash content of solid recovered fuels. It is primarily geared toward laboratories, producers, suppliers and purchasers of solid recovered fuels but is also useful for the authorities and inspection organizations. The method specified in this European Standard is based on CEN/TS 14775 as well as ISO 1171. SIST EN 15403:2011
EN 15403:2011 (E) 5 1 Scope This European Standard specifies a method for the determination of ash content of all solid recovered fuels. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15357:2011, Solid recovered fuels — Terminology, definitions and descriptions EN 15414-3, Solid recovered fuels — Determination of moisture content using the oven dry method — Part 3: Moisture in general analysis sample EN 15442, Solid recovered fuels — Methods for sampling EN 15443, Solid recovered fuels — Methods for the preparation of the laboratory sample 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 15357:2011 and the following apply. 3.1 ash content on dry basis mass of inorganic residue remaining after ignition of a fuel under specified conditions, expressed as mass fraction in percent of the dry matter in the fuel 4 Principle The sample is heated in air atmosphere up to a temperature of (550 ± 10) °C under rigidly controlled conditions of time, sample mass and equipment specifications. The ash content is determined by calcula
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.