SIST-TS CEN/TS 15414-3:2007

Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample

This Technical Specification specifies a method for the determination of moisture in an analysis sample by drying the sample in an oven. This method is suitable for use for general analysis samples in accordance with prCEN/TS 15414-1. It is applicable to all solid recovered fuels.
NOTE   The term moisture content when used with recovered materials can be misleading since solid recovered materials e.g. biomass frequently contains varying amounts of volatile compounds (extractives) which can evaporate when determining the moisture content of the general analyses sample by oven drying.

Feste Sekundärbrennstoffe - Bestimmung des Wassergehaltes unter Verwendung des Verfahrens der Ofentrocknung - Teil 3: Wassergehalt in gewöhnlichen Analysenproben

Combustibles solides de récupération - Détermination de l'humidité par la méthode de séchage a l'étuve - Partie 3: Humidité de l'échantillon pour analyse générale

Trdno alternativno gorivo - Določevanje vlage z metodo sušenja v sušilni komori – 3. del: Vlaga v preskusnem vzorcu

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2007
• Withdrawal Date: 28-Mar-2011
• ICS: 75.160.10 - Solid fuels
• Technical Committee: AGO - Refuse derived fuel
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 18-Mar-2011
• Due Date: 10-Apr-2011
• Completion Date: 29-Mar-2011
• Mandate: M/325 - Mandate to CEN on Solid Recovered Fuels (SRF)
• Ref Project: CEN/TS 15414-3:2006 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample

Relations

• Replaced By: SIST EN 15414-3:2011 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
• Effective Date: 01-May-2011
• Replaced By: SIST EN 15414-3:2011 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15414-3:2007
01-marec-2007
7UGQRDOWHUQDWLYQRJRULYR'RORþHYDQMHYODJH]PHWRGRVXãHQMDYVXãLOQLNRPRUL±
GHO9ODJDYSUHVNXVQHPY]RUFX
Solid recovered fuels - Determination of moisture content using the oven dry method -
Part 3: Moisture in general analysis sample
Feste Sekundärbrennstoffe - Bestimmung des Wassergehaltes unter Verwendung des
Verfahrens der Ofentrocknung - Teil 3: Wassergehalt in gewöhnlichen Analysenproben
Combustibles solides de récupération - Détermination de l'humidité par la méthode de
séchage a l'étuve - Partie 3: Humidité de l'échantillon pour analyse générale
Ta slovenski standard je istoveten z: CEN/TS 15414-3:2006
ICS:
75.160.10 Trda goriva Solid fuels
SIST-TS CEN/TS 15414-3:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

TECHNICAL SPECIFICATION
CEN/TS 15414-3
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
October 2006
ICS 75.160.10

English Version
Solid recovered fuels - Determination of moisture content using
the oven dry method - Part 3: Moisture in general analysis
sample
Combustibles solides de récupération - Détermination de Feste Sekundärbrennstoffe - Bestimmung des
l'humidité par la méthode de séchage à l'étuve - Partie 3: Wassergehaltes unter Verwendung des Verfahrens der
Humidité de l'échantillon pour analyse générale Ofentrocknung - Teil 3: Wassergehalt in gewöhnlichen
Analysenproben
This Technical Specification (CEN/TS) was approved by CEN on 25 March 2006 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15414-3:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

CEN/TS 15414-3:2006 (E)
Contents
Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle.4
5 Apparatus .4
6 Sample preparation .5
7 Procedure .5
8 Calculation.5
9 Precision.6
10 Test report .6
Bibliography .7

2

---------------------- Page: 3 ----------------------

CEN/TS 15414-3:2006 (E)
Foreword
This document (CEN/TS 15414-3:2006) has been prepared by Technical Committee CEN/TC 343 “Solid
recovered fuels”, the secretariat of which is held by SFS.
CEN/TS 15414 “Solid recovered fuels — Determination of moisture content using the oven dry method”
consists of three parts:
Part 1: Determination of total moisture by a reference method
Part 2: Determination of total moisture by a simplified method
Part 3: Moisture in general analysis sample
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.

3

---------------------- Page: 4 ----------------------

CEN/TS 15414-3:2006 (E)
1 Scope
This Technical Specification specifies a method for the determination of moisture in an analysis sample by
drying the sample in an oven. This method is suitable for use for general analysis samples in accordance with
CEN/TS 15414-1. It is applicable to all solid recovered fuels.
NOTE 1 The term moisture content when used with recovered materials can be misleading since solid recovered
materials e.g. biomass frequently contain varying amounts of volatile compounds (extractives) which can evaporate when
determining the moisture content of the general analyses sample by oven drying.
NOTE 2 This Techni
...