Ferromanganese -- Specification and conditions of delivery

Refers to ferromanganese usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage.

Ferro-manganèse -- Spécifications et conditions de livraison

Feromangan - Specifikacija in dobavni pogoji

General Information

Status
Withdrawn
Publication Date
31-Mar-2000
Withdrawal Date
22-Jun-2020
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
23-Jun-2020
Due Date
16-Jul-2020
Completion Date
23-Jun-2020

Relations

Buy Standard

Standard
ISO 5446:2000
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 5446:1980 - Ferromanganese -- Specification and conditions of delivery
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 5446:1980 - Ferro-manganese -- Spécifications et conditions de livraison
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 5446:1980 - Ferro-manganese -- Spécifications et conditions de livraison
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 5446:2000
01-april-2000
Feromangan - Specifikacija in dobavni pogoji
Ferromanganese -- Specification and conditions of delivery
Ferro-manganèse -- Spécifications et conditions de livraison
Ta slovenski standard je istoveten z: ISO 5446:1980
ICS:
77.100 Železove zlitine Ferroalloys
SIST ISO 5446:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 5446:2000

---------------------- Page: 2 ----------------------

SIST ISO 5446:2000
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(AYHAPO~HAR OPrAHM3AUMR ll0 CTAHAAPTM3ALWWORGANISATION INTERNATIONALE DE NORMALlSATlON
Specification and conditions of
Ferromanganese -
delivery
Ferro-manganbe - Spkcifica tions et conditions de livraison
First edition - 1980-12-15
-
Ref. No. IS0 5446-1980 (E)
UDC 669.15’74-198
W
delivery, quality control, grain size.
Descriptors : ferroalloys, ferromanganese, materials specifications, Chemical composition,
Price based on 4 pages

---------------------- Page: 3 ----------------------

SIST ISO 5446:2000
Foreword
lS0 (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bodies). The work of developing lnter-
national Standards is carried out through ISO technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 5446 was developed by Technical Committee ISO/TC 132,
Ferroaloys, and was circulated to the member bodies in November 1979.
lt has been approved by the member bodies of the following countries :
Austria India South Africa, Rep. of
Brazil I taly Sweden
Canada Japan United Kingdom
China Norway
USA
Czechoslovakia Pakistan USSR
France Poland
Yugoslavia
Germany, F. R. Romania
The member body of the following country expressed disapproval of the document on
technical grounds
Australia
0 International Organkation for Standardkation, 1980
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 5446:2000
INTERNATIONAL STANDARD ISO 5446-1980 (E)
Ferromanganese - Specification and conditions
of delivery
1 Scope and field of application 5 Requirements
This International Standard specifies requirements and con-
5.1 Constitution of consignment
ditions of delivery for ferromanganese usually supplied for
steelmaking and foundry use.
Ferromanganese shall be delivered in consignments constituted
by one of the following methods.
2 References
5.1.1 Tapped lot method
ISO 565, Testsieves - Wo ven me tal wire clo th and perfora ted
plate - Nominal sizes of apertures.
A consignment constituted by the tapped lot method consists
of a ferromanganese mass of one melt (or one part of a con-
ISO 3713, Ferroalloys - Sampling and prepara tion of samples
tinuous tap).
-
General rules. 1)
5.12 Graded lot method
I SO 4159, Ferromanganese and ferrosilicomanganese - Deter-
mina tion of manganese con ten t - Po ten tiome tric me thod.
A consignment constituted by the graded lot method consists
of a number of melts (or Parts of continuous taps) of one
ferromanganese designation.
3 Definition
The manganese content of the melts (or Parts of continuous
3.1 ferromanganese : A master alloy of iron and
taps) constituting the consignment shall not differ from each
manganese with a minimum manganese content of 70,O % by
other by more than 3 % absolute.
mass, and a maximum manganese content of 95,0 % by mass,
obtained by reduction.
5.1.3 Blended lot method
4 Information for ordering
A consignment constituted by the blended lot method consists
of a number of melts (or Parts of continuous taps) of one
Orders for ferromanganese shall include the following informa-
ferromanganese designation, which have been crushed to a
tion.
particle size less than x mm2) and thoroughly mixed.
a) Quantity.
The content of the main constituent of the melts (or Parts of
continuous taps) constituting the consignment may vary
b) Constitution of consignment.
between the minimum and maximum limits specified for the
appropriate ferromanganese designation.
c) Chemical composition in accordance with the designa-
tions given in tables 1 to 6.
d) Particle size ranges in accordance with the classes 5.2 Chemical composition
given in table 7.
5.2.1 The Chemical composition of ferromanganese shall be
e) Necessary requirements for analysis reports, packing, as specified in tables 1 to 6. The limits stated correspond to
particle size ranges in classes 1 to 6 in accordance with table 7.
etc., as appropriate.
_--~
1) At present at the Stage of draft.
2) To be defined after further investigation.

---------------------- Page: 5 ----------------------

SIST ISO 5446:2000
ISO 5446-1980 (El
5.2.2 The Chemical compositions given in tables 1 to 6 Show ried out, representatives of both supplier and purchaser may be
only the main constituent elements and usual impurities. lf the
present.
purchaser requires closer ranges for the main element contents
and/or different limits for specified elements and/or limits for
6.1.3 If required, arbitration sampling shall be carried out by
non-specified elements, this shall be agreed upon between sup-
an arbitrator Chosen by mutual agreement between supplier
plier and purchaser.
and purchaser. Sampling shall be carried out by the method
specified in ISO 371331, but other methods of sampling having
52.3 The Chemical compositions given in tables 1 to 6 are
similar precision may be agreed upon between supplier, pur-
subject to the prec
...

International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(AYHAPO~HAR OPrAHM3AUMR ll0 CTAHAAPTM3ALWWORGANISATION INTERNATIONALE DE NORMALlSATlON
Specification and conditions of
Ferromanganese -
delivery
Ferro-manganbe - Spkcifica tions et conditions de livraison
First edition - 1980-12-15
-
Ref. No. IS0 5446-1980 (E)
UDC 669.15’74-198
W
delivery, quality control, grain size.
Descriptors : ferroalloys, ferromanganese, materials specifications, Chemical composition,
Price based on 4 pages

---------------------- Page: 1 ----------------------
Foreword
lS0 (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bodies). The work of developing lnter-
national Standards is carried out through ISO technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 5446 was developed by Technical Committee ISO/TC 132,
Ferroaloys, and was circulated to the member bodies in November 1979.
lt has been approved by the member bodies of the following countries :
Austria India South Africa, Rep. of
Brazil I taly Sweden
Canada Japan United Kingdom
China Norway
USA
Czechoslovakia Pakistan USSR
France Poland
Yugoslavia
Germany, F. R. Romania
The member body of the following country expressed disapproval of the document on
technical grounds
Australia
0 International Organkation for Standardkation, 1980
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD ISO 5446-1980 (E)
Ferromanganese - Specification and conditions
of delivery
1 Scope and field of application 5 Requirements
This International Standard specifies requirements and con-
5.1 Constitution of consignment
ditions of delivery for ferromanganese usually supplied for
steelmaking and foundry use.
Ferromanganese shall be delivered in consignments constituted
by one of the following methods.
2 References
5.1.1 Tapped lot method
ISO 565, Testsieves - Wo ven me tal wire clo th and perfora ted
plate - Nominal sizes of apertures.
A consignment constituted by the tapped lot method consists
of a ferromanganese mass of one melt (or one part of a con-
ISO 3713, Ferroalloys - Sampling and prepara tion of samples
tinuous tap).
-
General rules. 1)
5.12 Graded lot method
I SO 4159, Ferromanganese and ferrosilicomanganese - Deter-
mina tion of manganese con ten t - Po ten tiome tric me thod.
A consignment constituted by the graded lot method consists
of a number of melts (or Parts of continuous taps) of one
ferromanganese designation.
3 Definition
The manganese content of the melts (or Parts of continuous
3.1 ferromanganese : A master alloy of iron and
taps) constituting the consignment shall not differ from each
manganese with a minimum manganese content of 70,O % by
other by more than 3 % absolute.
mass, and a maximum manganese content of 95,0 % by mass,
obtained by reduction.
5.1.3 Blended lot method
4 Information for ordering
A consignment constituted by the blended lot method consists
of a number of melts (or Parts of continuous taps) of one
Orders for ferromanganese shall include the following informa-
ferromanganese designation, which have been crushed to a
tion.
particle size less than x mm2) and thoroughly mixed.
a) Quantity.
The content of the main constituent of the melts (or Parts of
continuous taps) constituting the consignment may vary
b) Constitution of consignment.
between the minimum and maximum limits specified for the
appropriate ferromanganese designation.
c) Chemical composition in accordance with the designa-
tions given in tables 1 to 6.
d) Particle size ranges in accordance with the classes 5.2 Chemical composition
given in table 7.
5.2.1 The Chemical composition of ferromanganese shall be
e) Necessary requirements for analysis reports, packing, as specified in tables 1 to 6. The limits stated correspond to
particle size ranges in classes 1 to 6 in accordance with table 7.
etc., as appropriate.
_--~
1) At present at the Stage of draft.
2) To be defined after further investigation.

---------------------- Page: 3 ----------------------
ISO 5446-1980 (El
5.2.2 The Chemical compositions given in tables 1 to 6 Show ried out, representatives of both supplier and purchaser may be
only the main constituent elements and usual impurities. lf the
present.
purchaser requires closer ranges for the main element contents
and/or different limits for specified elements and/or limits for
6.1.3 If required, arbitration sampling shall be carried out by
non-specified elements, this shall be agreed upon between sup-
an arbitrator Chosen by mutual agreement between supplier
plier and purchaser.
and purchaser. Sampling shall be carried out by the method
specified in ISO 371331, but other methods of sampling having
52.3 The Chemical compositions given in tables 1 to 6 are
similar precision may be agreed upon between supplier, pur-
subject to the precision of the methods of sampling and
chaser and arbitrator.
analysis for ferromanganese (see clause 6).
The Sample obtained arbitration shall be accepted by both
bY
Parties.
5.3 Particle size ranges
5.3.1 Ferromanganese is supplied in lumps or as crushed and
6.2 Analysis
screened particles. The particle size ranges and tolerantes shall
be in accordance with table 7. The undersize values s
...

Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME~YHAPO~HAR OPl-AHM3A~MR Il0 CTAH~APTH3AlWWORGANISATION INTERNATIONALE DE NORMALISATION
Ferro-manganèse - Spécifications et conditions de
livraison
Ferromanganese - Specifica tion and conditions of delivery
Première édition - 1980-12-15
CDU 669.1574-M
Réf. no : ISO 5446-1980 (F)
Descripteurs : ferro-alliage, ferro-manganèse, spécification de matiére, composition chimique,
livraison, contrôle de qualité, granulométrie.
Prix basé sur 4 pages

---------------------- Page: 1 ----------------------
Avant-propos
LIS0 (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 5446 a été élaborée par le comité technique ISO/TC 132,
Ferra-a//iages, et a été soumise aux comités membres en novembre 1979.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ Inde Royaume-Uni
Italie Suède
Allemagne, R. F.
Autriche Japon Tchécoslovaquie
Norvège
Brésil URSS
Pakistan USA
Canada
Pologne Yougoslavie
Chine
Roumanie
France
Le comité membre du pays suivant l’a désapprouvée pour des raisons techniques :
Australie
0 Organisation internationale de normalisation, 1980
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 5446-1980 (F)
Ferro-manganèse - Spécifications et conditions
de livraison
1 Objet et domaine d’application 5 Spécifications
La présente Norme internationale indique les spécifications et
5.1 Méthodes de constitution des livraisons
les conditions de livraison du ferro-manganése habituellement
fourni en aciérie et en fonderie.
Le ferro-manganése doit être fourni par livraisons constituées
suivant l’une des méthodes suivantes.
51.1 Méthode des lots par coulbe
2 Références
Une livraison constituée suivant cette méthode consiste en une
ISO 565, Tamis de contrNe - Toiles métalliques et t6/es perfo-
masse de ferro-manganése provenant d’une seule coulée (ou
rées - Dimensions nominales des ouvertures.
d’une partie de coulée continue).
ISO 3713, Ferro-alliages - Échantillonnage et préparation des
échantillons - Réglles générales. 1)
5.12 Méthode des lots par coulées regroupees par
nuance
I SO 4159, Ferro-manganèse et ferro-silice-manganèse -
Dosage du manganèse - Méthode po ten tiomé trique,
Une livraison constituée suivant cette méthode consiste en un
certain nombre de coulées (ou de plusieurs parties de coulées
continues) d’un ferro-manganése d’une désignation donnée.
3 Définition
La teneur en manganése des coulées (ou des parties de coulées
continues) constituant la livraison ne doit pas différer de l’une à
3.1 ferro-manganèse : Alliage mère de fer et de manganèse
l’autre de plus de 3 % absolu.
ayant une teneur en manganése minimale de 70,O 5% et maxi-
male de 95,0 % en masse, obtenu par réduction.
51.3 Méthode des lots par mélange de coulées
Une livraison constituée par la méthode des lots par mélange de
coulées de même désignation consiste en un certain nombre de
4 Renseignements pour la commande
coulées (ou de parties de coulées continues) d’un ferro-
manganése d’une désignation donnée, qui ont été concassées
Les commandes de ferro-manganèse doivent comprendre les
à une dimension granulométrique inférieure à x mm2) et qui ont
renseignements suivants :
été soigneusement homogénéisées.
a) Quantité.
La teneur en élément principal des coulées (ou parties de COU-
Iées continues), constituant la livraison, peut varier entre la
b) Méthodes de constitution des livraisons.
limite minimale et la limite maximale spécifiées pour la désigna-
tion appropriée du ferro-manganése.
c) Composition chimique, conformément aux designa-
tions données dans les tableaux 1 à 6.
5.2 Composition chimique
d) Tranches granulométriques, conformément aux classes
données dans le tableau 7.
5.2.1 La composition chimique du ferro-manganése doit être
telle que spécifiée dans les tableaux 1 à 6. Les limites indiquées
e) Spécifications pour les proces-verbaux d’analyse, correspondent aux tranches granulométriques des classes 1 à 6
l’emballage, etc. conformément au tableau 7.
1) Actuellement au stade de projet.
2) À définir après étude ultérieure.

---------------------- Page: 3 ----------------------
5.2.2 Dans les compositions chimiques indiquées dans les 6.1.2 L’échantillonnage est habituellement effectué sur le lieu
tableaux 1 à 6, ne sont mentionnés que les éléments principaux
de stockage du fournisseur, sauf accord contraire. Cependant,
et les impuretés courantes. Si l’acheteur désire des intervalles quel que soit l’endroit où l’échantillonnage est effectué, des
de teneurs plus étroits pour l’élément principal et/ou des limites représentants du fournisseur et de l’acheteur peuvent être pré-
différentes pour les éléments spécifiés et/ou des limites pour
sents.
les éléments non spécifiés, cela doit faire l’objet d’un accord
entre le fournisseur et l’acheteur.
6.1.3 Si un échantillonnage arbitral est nécessaire, il doit être
effectué par un arbitre choisi par accord entre le fournisseur et
l’acheteur. L’échantillonnage doit être effectué par la méthode
spécifiée dans I’ISO 371331, mais d’autres méthodes d’échantil-
lonnage donnant une fidélité semblable peuvent être acceptées
par accord entre le fournisseur, l’acheteur et l’arbitre.
Tranches granulométriques
5.3
L’échantillonna ge obtenu par cette procédure arbitrale doit être
accepté par les deux part
...

Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME~YHAPO~HAR OPl-AHM3A~MR Il0 CTAH~APTH3AlWWORGANISATION INTERNATIONALE DE NORMALISATION
Ferro-manganèse - Spécifications et conditions de
livraison
Ferromanganese - Specifica tion and conditions of delivery
Première édition - 1980-12-15
CDU 669.1574-M
Réf. no : ISO 5446-1980 (F)
Descripteurs : ferro-alliage, ferro-manganèse, spécification de matiére, composition chimique,
livraison, contrôle de qualité, granulométrie.
Prix basé sur 4 pages

---------------------- Page: 1 ----------------------
Avant-propos
LIS0 (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 5446 a été élaborée par le comité technique ISO/TC 132,
Ferra-a//iages, et a été soumise aux comités membres en novembre 1979.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ Inde Royaume-Uni
Italie Suède
Allemagne, R. F.
Autriche Japon Tchécoslovaquie
Norvège
Brésil URSS
Pakistan USA
Canada
Pologne Yougoslavie
Chine
Roumanie
France
Le comité membre du pays suivant l’a désapprouvée pour des raisons techniques :
Australie
0 Organisation internationale de normalisation, 1980
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 5446-1980 (F)
Ferro-manganèse - Spécifications et conditions
de livraison
1 Objet et domaine d’application 5 Spécifications
La présente Norme internationale indique les spécifications et
5.1 Méthodes de constitution des livraisons
les conditions de livraison du ferro-manganése habituellement
fourni en aciérie et en fonderie.
Le ferro-manganése doit être fourni par livraisons constituées
suivant l’une des méthodes suivantes.
51.1 Méthode des lots par coulbe
2 Références
Une livraison constituée suivant cette méthode consiste en une
ISO 565, Tamis de contrNe - Toiles métalliques et t6/es perfo-
masse de ferro-manganése provenant d’une seule coulée (ou
rées - Dimensions nominales des ouvertures.
d’une partie de coulée continue).
ISO 3713, Ferro-alliages - Échantillonnage et préparation des
échantillons - Réglles générales. 1)
5.12 Méthode des lots par coulées regroupees par
nuance
I SO 4159, Ferro-manganèse et ferro-silice-manganèse -
Dosage du manganèse - Méthode po ten tiomé trique,
Une livraison constituée suivant cette méthode consiste en un
certain nombre de coulées (ou de plusieurs parties de coulées
continues) d’un ferro-manganése d’une désignation donnée.
3 Définition
La teneur en manganése des coulées (ou des parties de coulées
continues) constituant la livraison ne doit pas différer de l’une à
3.1 ferro-manganèse : Alliage mère de fer et de manganèse
l’autre de plus de 3 % absolu.
ayant une teneur en manganése minimale de 70,O 5% et maxi-
male de 95,0 % en masse, obtenu par réduction.
51.3 Méthode des lots par mélange de coulées
Une livraison constituée par la méthode des lots par mélange de
coulées de même désignation consiste en un certain nombre de
4 Renseignements pour la commande
coulées (ou de parties de coulées continues) d’un ferro-
manganése d’une désignation donnée, qui ont été concassées
Les commandes de ferro-manganèse doivent comprendre les
à une dimension granulométrique inférieure à x mm2) et qui ont
renseignements suivants :
été soigneusement homogénéisées.
a) Quantité.
La teneur en élément principal des coulées (ou parties de COU-
Iées continues), constituant la livraison, peut varier entre la
b) Méthodes de constitution des livraisons.
limite minimale et la limite maximale spécifiées pour la désigna-
tion appropriée du ferro-manganése.
c) Composition chimique, conformément aux designa-
tions données dans les tableaux 1 à 6.
5.2 Composition chimique
d) Tranches granulométriques, conformément aux classes
données dans le tableau 7.
5.2.1 La composition chimique du ferro-manganése doit être
telle que spécifiée dans les tableaux 1 à 6. Les limites indiquées
e) Spécifications pour les proces-verbaux d’analyse, correspondent aux tranches granulométriques des classes 1 à 6
l’emballage, etc. conformément au tableau 7.
1) Actuellement au stade de projet.
2) À définir après étude ultérieure.

---------------------- Page: 3 ----------------------
5.2.2 Dans les compositions chimiques indiquées dans les 6.1.2 L’échantillonnage est habituellement effectué sur le lieu
tableaux 1 à 6, ne sont mentionnés que les éléments principaux
de stockage du fournisseur, sauf accord contraire. Cependant,
et les impuretés courantes. Si l’acheteur désire des intervalles quel que soit l’endroit où l’échantillonnage est effectué, des
de teneurs plus étroits pour l’élément principal et/ou des limites représentants du fournisseur et de l’acheteur peuvent être pré-
différentes pour les éléments spécifiés et/ou des limites pour
sents.
les éléments non spécifiés, cela doit faire l’objet d’un accord
entre le fournisseur et l’acheteur.
6.1.3 Si un échantillonnage arbitral est nécessaire, il doit être
effectué par un arbitre choisi par accord entre le fournisseur et
l’acheteur. L’échantillonnage doit être effectué par la méthode
spécifiée dans I’ISO 371331, mais d’autres méthodes d’échantil-
lonnage donnant une fidélité semblable peuvent être acceptées
par accord entre le fournisseur, l’acheteur et l’arbitre.
Tranches granulométriques
5.3
L’échantillonna ge obtenu par cette procédure arbitrale doit être
accepté par les deux part
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.