SIST EN 61300-3-15:2007

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren -- Teil 3-15: Untersuchungen und Messungen - Exzentrizität eines konvex polierten Stiftes

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 3-15: Examens et mesures - Décentrage du dôme de la face terminale d'une férule polie convexe

La présente partie de la CEI 61300 décrit la façon de mesurer le décentrage du dôme de la face terminale d'une férule polie de façon sphérique, selon une méthode d'interférence.

Optični spojni elementi in pasivne komponente – Osnovni preskuševalni in merilni postopki – 3-15. del: Preiskovanje in meritve – Ekscentričnost kape konveksno (izbočeno) poliranega čela tulke (IEC 61300-3-15:2006)

General Information

• Status: Published
• Publication Date: 16-Jul-2007
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 18-May-2007
• Due Date: 23-Jul-2007
• Completion Date: 29-May-2007
• Ref Project: EN 61300-3-15:2007 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface

Relations

• Replaces: SIST EN 61300-3-15:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-15: Examinations and measurements - Eccentricity of a convex polished ferrule endface
• Effective Date: 01-Sep-2007
• Replaces: SIST EN 61300-3-15:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-15: Examinations and measurements - Eccentricity of a convex polished ferrule endface
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 61300-3-15:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-15: Examinations and measurements - Eccentricity of a convex polished ferrule endface
• Effective Date: 06-May-2014
• Replaces: SIST EN 61300-3-15:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-15: Examinations and measurements - Eccentricity of a convex polished ferrule endface
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-3-15:2007
01-september-2007
1DGRPHãþD
SIST EN 61300-3-15:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH±2VQRYQLSUHVNXãDOQLLQPHULOQL
SRVWRSNL±GHO3UHLVNRYDQMHLQPHULWYH±(NVFHQWULþQRVWNDSHNRQYHNVQR
L]ERþHQRSROLUDQHJDþHODWXONH,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 3-15: Examinations and measurements - Dome
eccentricity of a convex polished ferrule endface (IEC 61300-3-15:2006)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren -- Teil 3-15: Untersuchungen und Messungen - Exzentrizität eines
konvex polierten Stiftes (IEC 61300-3-15:2006)
Dispositifs d'interconnexion et composants passifs a fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 3-15: Examens et mesures - Décentrage
du dôme de la face terminale d'une férule polie convexe (IEC 61300-3-15:2006)
Ta slovenski standard je istoveten z: EN 61300-3-15:2007
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-15:2007 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61300-3-15

NORME EUROPÉENNE
February 2007
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-3-15:1997


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 3-15: Examinations and measurements -
Dome eccentricity of a convex polished ferrule endface
(IEC 61300-3-15:2006)


Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 3-15: Examens et mesures - Teil 3-15: Untersuchungen
Décentrage du dôme de la face terminale und Messungen -
d'une férule polie convexe Exzentrizität eines konvex polierten Stiftes
(CEI 61300-3-15:2006) (IEC 61300-3-15:2006)




This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-3-15:2007 E

---------------------- Page: 2 ----------------------

EN 61300-3-15:2007 - 2 -
Foreword
The text of document 86B/2371/FDIS, future edition 2 of IEC 61300-3-15, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-3-15 on 2006-11-01.
This European Standard supersedes EN 61300-3-15:1997.
EN 61300-3-15:2007 prescribes only an interference method though EN 61300-3-15:1997 prescribed a
Newton ring method as well as an interference method.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-3-15:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61300-1 NOTE  Harmonized as EN 61300-1:2003 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61300-3-15:2007
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
ISO 2538 - Geometrical Product Specifications (GPS) - EN ISO 2538 2003
Series of angles and slopes on prisms




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



61300-3-15
INTERNATIONAL


Deuxième édition
STANDARD

Second edition

2006-10


Dispositifs d’interconnexion et
composants passifs à fibres optiques –
Méthodes fondamentales d’essais et de mesures –
Partie 3-15:
Examens et mesures –
Décentrage du dôme de la face
terminale d’une férule polie convexe

Fibre optic interconnecting
devices and passive components –
Basic test and measurement procedures –
Part 3-15:
Examinations and measurements –
Dome eccentricity of a convex
polished ferrule endface
© IEC 2006 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
K
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

61300-3-15 © IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative reference .9
3 General description .9
3.1 Apex eccentricity.9
3.2 Interference method .11
4 Apparatus.11
5 Procedure .13
6 Details to be specified .17

Bibliography.19

Figure 1 – Definition of apex eccentricity .9
Figure 2 – Example of displacement of ring centre for ferrule rotation .13
Figure 3 – Example of set-up for eccentricity measurement .15

---------------------- Page: 6 ----------------------

61300-3-15 © IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
__________

FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 3-15: Examinations and measurements –
Dome eccentricity of a convex polished ferrule endface


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publis
...