iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 625.1 S1:1999

(Main)

Insulation coordination for equipment within low-voltage systems -- Part 1: Principles, requirements and tests

Insulation coordination for equipment within low-voltage systems -- Part 1: Principles, requirements and tests

Specifies the requirements for clearances, creepage distances and solid insulation for equipment based upon their perfomance criteria. Applies to equipment for use up to 2 000 m above sea level having a rated voltage up to 1 000 V a.c. with rated frequencies up to 30 kHz or a rated voltage up to 1 500 V d.c. Supersedes IEC 664 and IEC 664A. Has the status of a basic safety publication in accordance with IEC Guide 104.

Isolationskoordination für elektrische Betriebsmittel in Niederspannungsanlagen -- Teil 1: Grundsätze, Anforderungen und Prüfungen

Coordination de l'isolement des matériels dans les systèmes (réseaux) à basse tension -- Partie 1: Principes, prescriptions et essais

Définit les prescriptions pour les distances d'isolement dans l'air, des lignes de fuite et de l'isolation solide des matériels, basés sur leurs critères de performance. S'applique aux matériels utilisés jusqu'à 2 000 m au dessus du niveau de la mer ayant une tension assignée ne dépassant pas 1 000 V en courant alternatif, de fréquences assignées ne dépassant pas 30 kHz, ou une tension assignée ne déppassant pas 1 500 V en courant continu. A le statut d'une publication fondamentale de sécurité conformément au Guide 104.

Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests (IEC 60664-1:1992, modified)

General Information

Status
Withdrawn
Publication Date
30-Jun-1999
Withdrawal Date
07-Apr-2009
ICS
29.080.30 - Insulation systems
Technical Committee
IIZS - Insulating materials and systems
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
06-Mar-2009
Due Date
29-Mar-2009
Completion Date
08-Apr-2009
Directive
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
HD 625.1 S1:1996 - Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests

Relations

Replaced By
SIST EN 60664-1:2004 - Insulation coordination for equipment within low-voltage systems -- Part 1: Principles, requirements and tests
Effective Date
06-May-2014
Replaced By
SIST EN 60664-1:2004 - Insulation coordination for equipment within low-voltage systems -- Part 1: Principles, requirements and tests
Effective Date
29-Jan-2023
Replaced By
SIST EN 60664-1:2004 - Insulation coordination for equipment within low-voltage systems -- Part 1: Principles, requirements and tests
Effective Date
07-Jun-2022

Buy Standard

HD 625.1 S1:1999HD 625.1 S1:1999
PreviousNext
Standardization document
HD 625.1 S1:1999
English language
71 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 625.1 S1:1999
01-julij-1999
Insulation coordination for equipment within low-voltage systems - Part 1:
Principles, requirements and tests (IEC 60664-1:1992, modified)
Insulation coordination for equipment within low-voltage systems -- Part 1: Principles,
requirements and tests
Isolationskoordination für elektrische Betriebsmittel in Niederspannungsanlagen -- Teil 1:
Grundsätze, Anforderungen und Prüfungen
Coordination de l'isolement des matériels dans les systèmes (réseaux) à basse tension -
- Partie 1: Principes, prescriptions et essais
Ta slovenski standard je istoveten z: HD 625.1 S1:1996
ICS:
29.080.30 Izolacijski sistemi Insulation systems
SIST HD 625.1 S1:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 2 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 3 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 4 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 5 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 6 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 7 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 8 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 9 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 10 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 11 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 12 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 13 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 14 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 15 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 16 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 17 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 18 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 19 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 20 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 21 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 22 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 23 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 24 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 25 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 26 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 27 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 28 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 29 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 30 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 31 ----------------------

SIST HD 625.1 S1:1999

---------------------- Page: 32 ----------------------

SIST HD 625.1 S1:1999
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60664-1:2020/AC:2021(Corrigendum)
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests (IEC 60664-1:2020/COR1:2020)
EN IEC 60664-1:2020/AC:2020-12

TAN - // IEC Corrigendum

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60664-1:2020(Main)
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests (IEC 60664-1:2020)
EN IEC 60664-1:2020

This part of IEC 60664 deals with insulation coordination for equipment having a
rated voltage up to AC 1 000 V or DC 1 500 V connected to low-voltage supply systems.
This document applies to frequencies up to 30 kHz.
NOTE 1 Requirements for insulation coordination for equipment within low-voltage supply systems with rated
frequencies above 30 kHz are given in IEC 60664-4.
NOTE 2 Higher voltages can exist in internal circuits of the equipment.
It applies to equipment for use up to 2 000 m above sea level and provides guidance for use
at higher altitudes (See 5.2.3.4).
It provides requirements for technical committees to determine clearances, creepage
distances and criteria for solid insulation. It includes methods of electrical testing with
respect to insulation coordination.
The minimum clearances specified in this document do not apply where ionized gases are
present. Special requirements for such situations can be specified at the discretion of the
relevant technical committee.
This document does not deal with distances:
– through liquid insulation;
– through gases other than air;
– through compressed air.
This basic safety publication focusing on safety essential requirements is primarily intended
for use by technical committees in the preparation of standards in accordance with the
principles laid down in IEC Guide 104 and ISO/IEC Guide 51.
One of the responsibilities of a technical committee is, wherever applicable, to make use of
basic safety publications in the preparation of its publications.
However, in case of missing specified values for clearances, creepage distances and
requirements for solid insulation in the relevant product standards, or even missing
standards, this document applies.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61857-32:2020(Main)
Electrical insulation systems - Procedures for thermal evaluation - Part 32: Multifactor evaluation with increased factors during diagnostic testing (IEC 61857-32:2019)
EN IEC 61857-32:2019

EN-IEC 61857 series is focused on applications where other possible factors need to be incorporated to evaluate any influence on the performance of the electrical insulation system (EIS). Multi- factor evaluation is the most complex type of project to design and conduct. Clear guidelines are needed to give the user of this document a uniform approach and a method to analyse the test results. This document is for applications where the stresses are some combination of other factors of influence identified in IEC 60505. The multi-factor stresses are applied during the diagnostic portion of each test cycle. A few examples of other factors of influence or multi-factor stresses are: - high vibration; - submersion in oils, water, or solutions; - voltage higher than the test voltage of the reference EIS; - decreased cold shock temperature.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60664-3:2017(Main)
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution (IEC 60664-3:2016)
EN 60664-3:2017

Applies to rigid printed board assemblies protected by a coating of insulating material on one or both sides. Describes the requirements and test procedures. Has the status of a basic safety publication in accordance with IEC Guide 104.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61857-31:2017(Main)
Electrical insulation systems-procedures for thermal evaluation - Part 31: Applications with a designed life less than 5000 hours (IEC 61857-31:2017)
EN 61857-31:2017

This part of IEC 61857 establishes an EIS evaluation for applications with a designed life of
5 000 h or less. This test method follows the procedures of IEC 60505 and is modified based
on the range of designed life.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60505:2011/AC:2017(Corrigendum)
Evaluation and qualification of electrical insulation systems (IEC 60505:2011/COR1:2017)
EN 60505:2011/AC:2017-03

IEC corrigendum

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61858-1:2014(Main)
Electrical insulation systems - Thermal evaluation of modifications to an established EIS - Part 1: Wire-wound winding EIS
EN 61858-1:2014

EN IEC 61858-1 lists the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification. This standard is applicable to EIS used in wire-wound winding electrotechnical devices. The test procedures are comparative in that the performance of a candidate EIS is compared to that of a reference EIS, which has proven service experience in accordance with IEC 60505 or has been evaluated by one of the procedures given in the IEC 61857 series.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61858-2:2014(Main)
Electrical insulation systems - Thermal evaluation of modifications to an established EIS- Part-2: Form-wound EIS
EN 61858-2:2014

EN IEC 61858-2 lists the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification. This standard is applicable to EIS used in form-wound electrotechnical devices. The test procedures are comparative in that the performance of a candidate EIS is compared to that of a reference EIS, which has proven service experience in accordance with IEC 60505 or has been evaluated by one of the procedures given in IEC 60085 and IEC 60034-18-31.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62068:2014(Main)
Electrical insulation materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses
EN 62068:2013

This International Standard applies to electrical equipment, regardless of voltage, containing an insulation system, which is - connected to an electronic power supply, and - requires an evaluation of insulation endurance under repetitive voltage impulses. This standard proposes a general test procedure to facilitate screening of electrical insulating materials (EIM) and systems (EIS) and to achieve a relative evaluation of insulation endurance under conditions of repetitive impulses.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60505:2011
Evaluation and qualification of electrical insulation systems
EN 60505:2011

This International Standard establishes the basis for estimating the ageing of electrical insulation systems (EIS) under conditions of either electrical, thermal, mechanical, environmental stresses or combinations of these (multifactor stresses). It specifies the principles and procedures that shall be followed, during the development of EIS functional test and evaluation procedures, to establish the estimated service life for a specific EIS. This standard should be used by all IEC technical committees responsible for equipment having an EIS.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day