iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 60664-1:2020/AC:2021

(Corrigendum)

Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests (IEC 60664-1:2020/COR1:2020)

Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests (IEC 60664-1:2020/COR1:2020)

TAN - // IEC Corrigendum

Isolationskoordination für elektrische Betriebsmittel in Niederspannungsanlagen - Teil 1: Grundsätze, Anforderungen und Prüfungen (IEC 60664-1:2020/COR1:2020)

Coordination de l'isolement des matériels dans les réseaux d'énergie électrique à basse tension - Partie 1: Principes, exigences et essais (IEC 60664-1:2020/COR1:2020)

Koordinacija izolacije za opremo v okviru nizkonapetostnih sistemov - 1. del: Načela, zahteve in preskusi - Popravek AC (IEC 60664-1:2020/COR1:2020)

General Information

Status
Published
Publication Date
14-Dec-2020
ICS
29.080.30 - Insulation systems
Technical Committee
IIZS - Insulating materials and systems
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Dec-2020
Due Date
15-Feb-2021
Completion Date
15-Dec-2020
Ref Project
EN IEC 60664-1:2020/AC:2020-12 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests

Relations

Corrects
SIST EN IEC 60664-1:2020 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests (IEC 60664-1:2020)
Effective Date
10-Nov-2020

Buy Standard

EN IEC 60664-1:2020/AC:2021EN IEC 60664-1:2020/AC:2021
PreviousNext
Corrigendum
EN IEC 60664-1:2020/AC:2021
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60664-1:2020/AC:2021
01-februar-2021
Koordinacija izolacije za opremo v okviru nizkonapetostnih sistemov - 1. del:
Načela, zahteve in preskusi - Popravek AC (IEC 60664-1:2020/COR1:2020)
Insulation coordination for equipment within low-voltage supply systems - Part 1:
Principles, requirements and tests (IEC 60664-1:2020/COR1:2020)
Isolationskoordination für elektrische Betriebsmittel in Niederspannungsanlagen - Teil 1:
Grundsätze, Anforderungen und Prüfungen (IEC 60664-1:2020/COR1:2020)
Coordination de l'isolement des matériels dans les réseaux d'énergie électrique à basse
tension - Partie 1: Principes, exigences et essais (IEC 60664-1:2020/COR1:2020)
Ta slovenski standard je istoveten z: EN IEC 60664-1:2020/AC:2020-12
ICS:
29.080.30 Izolacijski sistemi Insulation systems
SIST EN IEC 60664-1:2020/AC:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60664-1:2020/AC:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 60664-1:2020/AC:2021

EUROPEAN STANDARD EN IEC 60664-
1:2020/AC:2020-12
NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2020

ICS 29.080.30
English Version
Insulation coordination for equipment within low-voltage supply
systems - Part 1: Principles, requirements and tests
(IEC 60664-1:2020/COR1:2020)
Coordination de l'isolement des matériels dans les réseaux To be completed
d'énergie électrique à basse tension - Partie 1: Principes, (IEC 60664-1:2020/COR1:2020)
exigences et essais
(IEC 60664-1:2020/COR1:2020)
This corrigendum becomes effective on 4 December 2020 for incorporation in the English language version of the EN.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60664-1:2020(Main)
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests (IEC 60664-1:2020)
EN IEC 60664-1:2020

This part of IEC 60664 deals with insulation coordination for equipment having a
rated voltage up to AC 1 000 V or DC 1 500 V connected to low-voltage supply systems.
This document applies to frequencies up to 30 kHz.
NOTE 1 Requirements for insulation coordination for equipment within low-voltage supply systems with rated
frequencies above 30 kHz are given in IEC 60664-4.
NOTE 2 Higher voltages can exist in internal circuits of the equipment.
It applies to equipment for use up to 2 000 m above sea level and provides guidance for use
at higher altitudes (See 5.2.3.4).
It provides requirements for technical committees to determine clearances, creepage
distances and criteria for solid insulation. It includes methods of electrical testing with
respect to insulation coordination.
The minimum clearances specified in this document do not apply where ionized gases are
present. Special requirements for such situations can be specified at the discretion of the
relevant technical committee.
This document does not deal with distances:
– through liquid insulation;
– through gases other than air;
– through compressed air.
This basic safety publication focusing on safety essential requirements is primarily intended
for use by technical committees in the preparation of standards in accordance with the
principles laid down in IEC Guide 104 and ISO/IEC Guide 51.
One of the responsibilities of a technical committee is, wherever applicable, to make use of
basic safety publications in the preparation of its publications.
However, in case of missing specified values for clearances, creepage distances and
requirements for solid insulation in the relevant product standards, or even missing
standards, this document applies.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61857-32:2020(Main)
Electrical insulation systems - Procedures for thermal evaluation - Part 32: Multifactor evaluation with increased factors during diagnostic testing (IEC 61857-32:2019)
EN IEC 61857-32:2019

EN-IEC 61857 series is focused on applications where other possible factors need to be incorporated to evaluate any influence on the performance of the electrical insulation system (EIS). Multi- factor evaluation is the most complex type of project to design and conduct. Clear guidelines are needed to give the user of this document a uniform approach and a method to analyse the test results. This document is for applications where the stresses are some combination of other factors of influence identified in IEC 60505. The multi-factor stresses are applied during the diagnostic portion of each test cycle. A few examples of other factors of influence or multi-factor stresses are: - high vibration; - submersion in oils, water, or solutions; - voltage higher than the test voltage of the reference EIS; - decreased cold shock temperature.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60664-3:2017(Main)
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution (IEC 60664-3:2016)
EN 60664-3:2017

Applies to rigid printed board assemblies protected by a coating of insulating material on one or both sides. Describes the requirements and test procedures. Has the status of a basic safety publication in accordance with IEC Guide 104.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61857-31:2017(Main)
Electrical insulation systems-procedures for thermal evaluation - Part 31: Applications with a designed life less than 5000 hours (IEC 61857-31:2017)
EN 61857-31:2017

This part of IEC 61857 establishes an EIS evaluation for applications with a designed life of
5 000 h or less. This test method follows the procedures of IEC 60505 and is modified based
on the range of designed life.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60505:2011/AC:2017(Corrigendum)
Evaluation and qualification of electrical insulation systems (IEC 60505:2011/COR1:2017)
EN 60505:2011/AC:2017-03

IEC corrigendum

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61858-1:2014(Main)
Electrical insulation systems - Thermal evaluation of modifications to an established EIS - Part 1: Wire-wound winding EIS
EN 61858-1:2014

EN IEC 61858-1 lists the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification. This standard is applicable to EIS used in wire-wound winding electrotechnical devices. The test procedures are comparative in that the performance of a candidate EIS is compared to that of a reference EIS, which has proven service experience in accordance with IEC 60505 or has been evaluated by one of the procedures given in the IEC 61857 series.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61858-2:2014(Main)
Electrical insulation systems - Thermal evaluation of modifications to an established EIS- Part-2: Form-wound EIS
EN 61858-2:2014

EN IEC 61858-2 lists the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification. This standard is applicable to EIS used in form-wound electrotechnical devices. The test procedures are comparative in that the performance of a candidate EIS is compared to that of a reference EIS, which has proven service experience in accordance with IEC 60505 or has been evaluated by one of the procedures given in IEC 60085 and IEC 60034-18-31.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62068:2014(Main)
Electrical insulation materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses
EN 62068:2013

This International Standard applies to electrical equipment, regardless of voltage, containing an insulation system, which is - connected to an electronic power supply, and - requires an evaluation of insulation endurance under repetitive voltage impulses. This standard proposes a general test procedure to facilitate screening of electrical insulating materials (EIM) and systems (EIS) and to achieve a relative evaluation of insulation endurance under conditions of repetitive impulses.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60505:2011
Evaluation and qualification of electrical insulation systems
EN 60505:2011

This International Standard establishes the basis for estimating the ageing of electrical insulation systems (EIS) under conditions of either electrical, thermal, mechanical, environmental stresses or combinations of these (multifactor stresses). It specifies the principles and procedures that shall be followed, during the development of EIS functional test and evaluation procedures, to establish the estimated service life for a specific EIS. This standard should be used by all IEC technical committees responsible for equipment having an EIS.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61857-21:2009(Main)
Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purpose models - Wire-wound applications (IEC 61857-21:2009)
EN 61857-21:2009

This part of IEC 61857 describes a general-purpose model (GPM) and a tall channel alternative model (GPM-TC) which can be used for the evaluation of wire-wound electrical insulation systems (EIS) where specific electrotechnical products are not available or required.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day