SIST EN 60445:2008
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations
This International Standard applies to the identification and marking of terminals of electrical equipment such as resistors, fuses, relays, contactors, transformers, rotating machines and, wherever applicable, to combinations of such equipment (e.g. assemblies). It also applies to the identification of terminations of certain designated conductors. This standard further includes general rules for an alphanumeric system.
Grund- und Sicherheitsregeln für die Mensch-Maschine-Schnittstelle - Kennzeichnung der Anschlüsse elektrischer Betriebsmittel und angeschlossener Leiterenden
Principes fondamentaux et de sécurité pour les interfaces homme-machines, le marquage et l'identification - Identification des bornes de matériels et des extrémités de conducteurs
Osnovna in varnostna načela za vmesnik človek-stroj, označevanje in razpoznavanje - Razpoznavanje terminalov opreme in končnikov določenih namenskih vodnikov, vključno s splošnimi pravili za alfanumerični sistem (IEC 60445:2006, spremenjen)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60445:2008
01-januar-2008
1DGRPHãþD
SIST EN 60445:2000
2VQRYQDLQYDUQRVWQDQDþHOD]DYPHVQLNþORYHNVWURMR]QDþHYDQMHLQ
UD]SR]QDYDQMH5D]SR]QDYDQMHWHUPLQDORYRSUHPHLQNRQþQLNRYGRORþHQLK
QDPHQVNLKYRGQLNRYYNOMXþQRVVSORãQLPLSUDYLOL]DDOIDQXPHULþQLVLVWHP ,(&
VSUHPHQMHQ
Basic and safety principles for man-machine interface, marking and identification -
Identification of equipment terminals and conductor terminations
Grund- und Sicherheitsregeln für die Mensch-Maschine-Schnittstelle - Kennzeichnung
der Anschlüsse elektrischer Betriebsmittel und angeschlossener Leiterenden
Principes fondamentaux et de sécurité pour les interfaces homme-machines, le
marquage et l'identification - Identification des bornes de matériels et des extrémités de
conducteurs
Ta slovenski standard je istoveten z: EN 60445:2007
ICS:
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST EN 60445:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 60445
NORME EUROPÉENNE
March 2007
EUROPÄISCHE NORM
ICS 29.020 Supersedes EN 60445:2000
English version
Basic and safety principles for man-machine interface,
marking and identification -
Identification of equipment terminals and conductor terminations
(IEC 60445:2006, modified)
Principes fondamentaux et de sécurité Grund- und Sicherheitsregeln
pour les interfaces homme-machines, für die Mensch-Maschine-Schnittstelle -
le marquage et l'identification - Kennzeichnung der Anschlüsse
Identification des bornes de matériels elektrischer Betriebsmittel und
et des extrémités de conducteurs angeschlossener Leiterenden
(CEI 60445:2006, modifiée) (IEC 60445:2006, modifiziert)
This European Standard was approved by CENELEC on 2007-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60445:2007 E
---------------------- Page: 2 ----------------------
EN 60445:2007 - 2 -
Foreword
The text of document 16/458/FDIS, future edition 4 of IEC 60445, prepared by IEC TC 16, Basic and
safety principles for man-machine interface, marking and identification, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 60445 on 2007-02-01.
This European Standard supersedes EN 60445:2000.
This edition includes the following significant technical changes with respect to EN 60445:2000:
– addition of Table 1 – Protective bonding conductor PB (earthed PBE, unearthed PBU);
– deletion of Annex A (informative): "Comparison of former and present designation".
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60445:2006 was approved by CENELEC as a European
Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
Table 1
Delete footnotes e) and f) and their references in the table.
Bibliography
Add the following note for IEC 61666:
NOTE Harmonized as EN 61666:1997 (not modified).
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60445:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60417 Data- Graphical symbols for use on equipment - -
base
1) 2)
IEC 60446 - Basic and safety principles for man-machine EN 60446 1999
interface, marking and identification -
Identification of conductors by colours or
numerals
IEC 60617 Data- Graphical symbols for diagrams - -
base
1)
IEC Guide 104 - The preparation of safety publications and - -
the use of basic safety publications and group
safety publications
1)
ISO/IEC Guide 51 - Safety aspects - Guidelines for their inclusion - -
in standards
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 4 ----------------------
INTERNATIONAL IEC
STANDARD 60445
Fourth edition
2006-11
BASIC SAFETY PUBLICATION
Basic and safety principles for man-machine
interface, marking and identification –
Identification of equipment terminals and
conductor terminations
© IEC 2006 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale M
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
---------------------- Page: 5 ----------------------
– 2 – 60445 © IEC:2006(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Terms and definitions .6
4 Methods of identification.8
5 Application of identification means .8
6 General rules for an alphanumeric system.8
6.1 General .8
6.2 Marking principles .8
7 Marking of equipment terminals intended for certain designated conductors and of
terminations of these conductors .11
Bibliography.13
Figure 1 – Single element with two terminals .9
Figure 2 – Single element with four terminals: two endpoints and two intermediate
points .9
Figure 3 – Three-phase equipment with six terminals.9
Figure 4 – Three-element equipment with twelve terminals: six endpoints and six
intermediate points .10
Figure 5a – Three-phase equipment with two groups of elements .10
Figure 5b – Two-phase equipment with two groups of elements with four terminals
each .10
Figure 5 – Equipment with groups of elements.10
Figure 6 – Interconnection of equipment terminals and certain designated conductors.11
Table 1 – Marking of equipment terminals intended for certain designated conductors.12
---------------------- Page: 6 ----------------------
60445 © IEC:2006(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE,
MARKING AND IDENTIFICATION –
IDENTIFICATION OF EQUIPMENT TERMINALS AND CONDUCTOR
TERMINATIONS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60445 has been prepared by IEC technical committee 16: Basic
and safety principles for man-machine interface, marking and identification.
This fourth edition cancels and replaces the third edition published in 1999 and constitutes a
technical r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.