EN 60445:2007

Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations

This International Standard applies to the identification and marking of terminals of electrical equipment such as resistors, fuses, relays, contactors, transformers, rotating machines and, wherever applicable, to combinations of such equipment (e.g. assemblies). It also applies to the identification of terminations of certain designated conductors. This standard further includes general rules for an alphanumeric system. It has the status of a basic safety publication in accordance with IEC Guide 104.

Grund- und Sicherheitsregeln für die Mensch-Maschine-Schnittstelle - Kennzeichnung der Anschlüsse elektrischer Betriebsmittel und angeschlossener Leiterenden

Principes fondamentaux et de sécurité pour les interfaces homme-machines, le marquage et l'identification - Identification des bornes de matériels et des extrémités de conducteurs

Osnovna in varnostna načela za vmesnik človek-stroj, označevanje in razpoznavanje - Razpoznavanje terminalov opreme in končnikov določenih namenskih vodnikov, vključno s splošnimi pravili za alfanumerični sistem (IEC 60445:2006, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 01-Mar-2007
• Withdrawal Date: 31-Jan-2010
• ICS: 29.020 - Electrical engineering in general
• Technical Committee: CLC/SR 16 - Basic and safety principles for man-machine interface, marking and identification
• Drafting Committee: IEC/TC 16 - IEC_TC_16
• Parallel Committee: IEC/TC 16 - IEC_TC_16
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Nov-2013
• Completion Date: 01-Nov-2013
• Ref Project: SIST EN 60445:2008 - Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations

Relations

• Replaces: EN 60445:2000 - Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system
• Effective Date: 29-Jan-2023
• Replaced By: EN 60445:2010 - Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60445:2008
01-januar-2008
1DGRPHãþD
SIST EN 60445:2000
2VQRYQDLQYDUQRVWQDQDþHOD]DYPHVQLNþORYHNVWURMR]QDþHYDQMHLQ
UD]SR]QDYDQMH5D]SR]QDYDQMHWHUPLQDORYRSUHPHLQNRQþQLNRYGRORþHQLK
QDPHQVNLKYRGQLNRYYNOMXþQRVVSORãQLPLSUDYLOL]DDOIDQXPHULþQLVLVWHP,(&
VSUHPHQMHQ
Basic and safety principles for man-machine interface, marking and identification -
Identification of equipment terminals and conductor terminations
Grund- und Sicherheitsregeln für die Mensch-Maschine-Schnittstelle - Kennzeichnung
der Anschlüsse elektrischer Betriebsmittel und angeschlossener Leiterenden
Principes fondamentaux et de sécurité pour les interfaces homme-machines, le
marquage et l'identification - Identification des bornes de matériels et des extrémités de
conducteurs
Ta slovenski standard je istoveten z: EN 60445:2007
ICS:
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST EN 60445:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60445

NORME EUROPÉENNE
March 2007
EUROPÄISCHE NORM

ICS 29.020 Supersedes EN 60445:2000


English version


Basic and safety principles for man-machine interface,
marking and identification -
Identification of equipment terminals and conductor terminations
(IEC 60445:2006, modified)


Principes fondamentaux et de sécurité Grund- und Sicherheitsregeln
pour les interfaces homme-machines, für die Mensch-Maschine-Schnittstelle -
le marquage et l'identification - Kennzeichnung der Anschlüsse
Identification des bornes de matériels elektrischer Betriebsmittel und
et des extrémités de conducteurs angeschlossener Leiterenden
(CEI 60445:2006, modifiée) (IEC 60445:2006, modifiziert)




This European Standard was approved by CENELEC on 2007-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60445:2007 E

---------------------- Page: 2 ----------------------

EN 60445:2007 - 2 -
Foreword
The text of document 16/458/FDIS, future edition 4 of IEC 60445, prepared by IEC TC 16, Basic and
safety principles for man-machine interface, marking and identification, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 60445 on 2007-02-01.
This European Standard supersedes EN 60445:2000.
This edition includes the following significant technical changes with respect to EN 60445:2000:
– addition of Table 1 – Protective bonding conductor PB (earthed PBE, unearthed PBU);
– deletion of Annex A (informative): "Comparison of former and present designation".
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60445:2006 was approved by CENELEC as a European
Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
Table 1
Delete footnotes e) and f) and their references in the table.
Bibliography
Add the following note for IEC 61666:
NOTE  Harmonized as EN 61666:1997 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60445:2007
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The foll
...