SIST EN 13920-16:2004

Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics

This part of this European Standard specifies characteristics, chemical composition and metal yield of aluminium scrap consisting of skimmings, drosses and spills. It also applies to the metallic obtained by dry processing of drosses and skimmings. Full lots of dross fines with particle size smaller than 0,8 mm, or loft of drosses with a metal yield less than 30% are not within the scope of this Standard.

Aluminium und Aluminiumlegierungen - Schrott - Teil 16: Schrott aus Krätzen, Ausläufern und Gröben

Diese Europäische Norm legt die Anforderungen an die Eigenschaften, die chemische Zusammensetzung und die Metallausbeute von Aluminiumschrott aus Krätzen und Ausläufern fest. Sie gilt auch für Gröbe, die bei der Aufbereitung der Krätze anfällt.
Ganze Lose von Feinanteilen mit einer Partikelgröße unter 0,8 mm oder Lose von Krätzen mit einer Metallausbeute unter 30 % gehören nicht zum Anwendungsbereich dieser Norm.

Aluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 16: Crasses de fonderie

Cette Norme européenne spécifie les caractéristiques, la composition chimique et le rendement en métal  du scrap constitué de crasses de fonderie. Elle spécifie également les fractions métalliques obtenues par traitement a sec des crasses de fonderie.
Cette norme ne traite pas des lots complets de fines de crasses constitués de particules de moins de 0,8 mm ou des lots de crasses présentant un rendement en métal inférieur a 30 %.

Aluminij in aluminijeve zlitine – Odpadni aluminij – 16. del: Livarniški odpadki (žlindra, posnemki, polivki)

General Information

• Status: Published
• Publication Date: 31-Dec-2003
• ICS: 13.030.50 - Recycling
• ICS: 77.120.10 - Aluminium and aluminium alloys
• Technical Committee: INEK - Nonferrous metals
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2004
• Due Date: 01-Jan-2004
• Completion Date: 01-Jan-2004
• Ref Project: EN 13920-16:2003 - Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine – Odpadni aluminij – 16. del: Livarniški odpadki (žlindra, posnemki, polivki)Aluminium und Aluminiumlegierungen - Schrott - Teil 16: Schrott aus Krätzen, Ausläufern und GröbenAluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 16: Crasses de fonderieAluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys13.030.50RecikliranjeRecyclingICS:Ta slovenski standard je istoveten z:EN 13920-16:2003SIST EN 13920-16:2004en01-januar-2004SIST EN 13920-16:2004SLOVENSKI
STANDARD



SIST EN 13920-16:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13920-16April 2003ICS 13.030.50; 77.120.10English versionAluminium and aluminium alloys - Scrap - Part 16: Scrapconsisting of skimmings, drosses, spills and metallicsAluminium et alliages d'aluminium - Scrap (matièrespremières pour recyclage) - Partie 16: Crasses de fonderieAluminium und Aluminiumlegierungen - Schrott - Teil 16:Schrott aus Krätzen, Ausläufern und GröbenThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13920-16:2003 ESIST EN 13920-16:2004



EN 13920-16:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Ordering information.45Requirements.45.1General.45.2Characteristics.55.3Chemical composition.55.4Metal yield.56Classification procedure, treatment of non-conformities and arbitration.5SIST EN 13920-16:2004



EN 13920-16:2003 (E)3ForewordThis document (EN 13920-16:2003) has been prepared by Technical Committee CEN /TC 132, "Aluminium andaluminium alloys", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by October 2003, and conflicting national standards shall be withd
...