SIST EN 61747-4-1:2005

Liquid crystal display devices -- Part 4-1: Matrix colour LCD modules - Essential ratings and characteristics

Describes the essential ratings and characteristics of matrix colour liquid crystal display modules.

Flüssigkristall-Anzeige-Bauelemente -- Teil 4-1: Farbige Matrix-Flüssigkristall-Anzeigemodule (LCD-Module) - Wesentliche Grenz- und Kennwerte

Dispositifs d'affichage à cristaux liquides -- Partie 4-1: Modules LCD matriciels couleur - Valeurs limites et caractéristiques essentielles

Décrit les valeurs limites et caractéristiques essentielles des modules d'affichage à cristaux liquides matriciels couleur.

Prikazalniški elementi s tekočimi kristali – 4-1. del: Moduli z matričnim barvnim LCD – Bistvene naznačene vrednosti in karakteristike (IEC 61747-4-1:2004)

General Information

• Status: Published
• Publication Date: 30-Nov-2005
• ICS: 31.120 - Electronic display devices
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2005
• Due Date: 01-Dec-2005
• Completion Date: 01-Dec-2005
• Ref Project: EN 61747-4-1:2004 - Liquid crystal display devices - Part 4-1: Matrix colour LCD modules - Essential ratings and characteristics

Standards Content (Sample)

SLOVENSKI SIST EN 61747-4-1:2005

STANDARD
december 2005
Prikazalniški elementi s tekočimi kristali – 4-1. del: Moduli z matričnim
barvnim LCD – Bistvene naznačene vrednosti in karakteristike (IEC 61747-4-
1:2004)
Liquid crystal display devices – Part 4-1: Matrix colour LCD modules – Essential
ratings and characteristics (IEC 61747-4-1:2004)
ICS 31.120 Referenčna številka
SIST EN 61747-4-1:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61747-4-1
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2004

ICS 31.120


English version


Liquid crystal display devices
Part 4-1: Matrix colour LCD modules –
Essential ratings and characteristics
(IEC 61747-4-1:2004)


Dispositifs d'affichage à cristaux liquides Flüssigkristall-Anzeige-Bauelemente
Partie 4-1: Modules LCD matriciels Teil 4-1: Farbige Matrix-Flüssigkristall-
couleur – Anzeigemodule (LCD-Module) -
Valeurs limites et caractéristiques Wesentliche Grenz- und Kennwerte
essentielles (IEC 61747-4-1:2004)
(CEI 61747-4-1:2004)






This European Standard was approved by CENELEC on 2004-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61747-4-1:2004 E

---------------------- Page: 2 ----------------------

EN 61747-4-1:2004 - 2 -
Foreword
The text of document 110/28/FDIS, future edition 1 of IEC 61747-4-1, prepared by IEC TC 110, Flat
panel display devices, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 61747-4-1 on 2004-10-01.
This standard is to be used in conjunction with EN 61747-1:1999.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61747-4-1:2004 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61747-4-1:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 61747-1 1998 Liquid crystal and solid-state display EN 61747-1 1999
devices
Part 1: Generic specification

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



61747-4-1
INTERNATIONAL


Première édition
STANDARD

First edition

2004-11


Dispositifs d'affichage à cristaux liquides –
Partie 4-1:
Modules LCD matriciels couleur –
Valeurs limites et caractéristiques essentielles

Liquid crystal display devices –
Part 4-1:
Matrix colour LCD modules –
Essential ratings and characteristics

 IEC 2004 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
H
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

61747-4-1  IEC:2004 – 3 –
CONTENTS

FOREWORD.5

1 Scope.9
2 Normative reference .9
3 Matrix colour liquid crystal display modules .9
3.1 Type.9
3.2 Principles and material used .9
3.3 Modes of operation.9
3.4 Details of outline .11
3.5 Limiting values (absolute maximum rating system) over the operating
temperature range, unless otherwise stated .11
3.6 Electrical and optical characteristics.11
3.7 Supplementary information.15

---------------------- Page: 6 ----------------------

61747-4-1  IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

LIQUID CRYSTAL DISPLAY DEVICES –

Part 4-1: Matrix colour LCD modules –
Essential ratings and characteristics


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates
closely with the International Organization for Standardization (ISO) in accordance with conditions determined
by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be
...