SIST EN 61988-3-1:2007

Plasma display panels -- Part 3-1: Mechanical interface

This part of IEC 61988 defines drawings and required dimensions of plasma display (PDP) modules, PDP components, PDP sub-assemblies and ancillary components. This standard serves as a basis to establish a set of PDP modules with a standard description of dimensions.

Plasmabildschirme -- Teil 3-1: Mechanische Schnittstelle

Panneaux d'affichage à plasma -- Partie 3-1: Interface mécanique

La présente partie de la EN 61988 définit les plans et les dimensions requises des modules d'afficheurs plasma (PDP), de parties constituantes des PDP, et des sous-ensembles et accessoires des PDP. Cette norme sert de base à l'établissement d'un ensemble de modules PDP ayant une description normalisée de leurs dimensions.

Plošče s plazemskimi prikazovalniki - 3-1. del: Mehanski vmesnik (IEC 61988-3-1:2005)

General Information

• Status: Published
• Publication Date: 31-Dec-2006
• ICS: 31.120 - Electronic display devices
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2007
• Due Date: 01-Jan-2007
• Completion Date: 01-Jan-2007
• Ref Project: EN 61988-3-1:2005 - Plasma display panels - Part 3-1: Mechanical interface

Standards Content (Sample)

6,67(16/29(16.,MDQXDU67$1'$5'LVWRYHWHQ(13ORãþHVSOD]HPVNLPLSULND]RYDOQLNLGHO0HKDQVNLYPHVQLN,(&3ODVPDGLVSOD\SDQHOV3DUW0HFKDQLFDOLQWHUIDFH,(& !"#$%&'( )&!*- . 5HIHUHQþQDãWHYLOND6,67(1HQ,&6







EUROPEAN STANDARD
EN 61988-3-1 NORME EUROPÉENNE EUROPÄISCHE NORM
November 2005 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61988-3-1:2005 E
ICS 31.260
English version
Plasma display panels Part 3-1: Mechanical interface (IEC 61988-3-1:2005)
Panneaux d'affichage à plasma Partie 3-1: Interface mécanique (CEI 61988-3-1:2005)
Plasmabildschirme Teil 3-1: Mechanische Schnittstelle (IEC 61988-3-1:2005)
This European Standard was approved by CENELEC on 2005-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 61988-3-1:2005 - 2 - Foreword The text of document 110/62/FDIS, future edition 1 of IEC 61988-3-1, prepared by IEC TC 110, Flat panel display devices, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61988-3-1 on 2005-11-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2006-08-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2008-11-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61988-3-1:2005 was approved by CENELEC as a European Standard without any modification. __________



- 3 - EN 61988-3-1:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61988-1 - 1) Plasma display panels Part 1: Terminology and letter symbols EN 61988-1 2003 2)
1) Undated reference.
2) Valid edition at date of issue.







NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 61988-3-1Première éditionFirst edition2005-10 Panneaux d'affichage à plasma – Partie 3-1: Interface mécanique
Plasma display panels – Part 3-1: Mechanical interface
Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2005
Droits de reproduction réservés

Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: [phone] Telefax: [phone] E-mail: [e-mail]
Web: www.iec.ch CODE PRIX PRICE CODE M Commission Electrotechnique InternationaleInternational Electrotechnical Commission



61988-3-1  IEC:2005 – 3 – CONTENTS
FOREWORD.5
1 Scope.9 2 Normative references.9 3 Terms and definitions.9 4 General requirements.11 5 Mechanical drawings.11 5.1 General.11 5.2 Assembled view and exploded view.11 5.3 Front view and side view.17 5.4 Rear view.19 5.5 Height map.23 5.6 Total list of parameters and dimensions.23
Figure 1 – Assembled view of an example PDP module.13 Figure 2 – Exploded view of an example PDP module.15 Figure 3 – Front view and side view of the PDP module including flex cables.17 Figure 4 – Rear view of the PDP module including flex cables.21 Figure 5 – Height map (rear view and side view).23
Table 1 – List of parameters defined in the front view and side view (Figure 3).19 Table 2 – List of parameters defined in the rear view (Figure 4).21 Table 3 – List of parameters defined in the height map (Figure 5).23 Table 4 – Total list of parameters and dimensions of the PDP module.25



61988-3-1  IEC:2005 – 5 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ___________
PLASMA DISPLAY PANELS –
Part 3-1: Mechanical interface
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61988-3-1 has been prepared by IEC technical committee 110: Flat panel display devices. The text of this standard is based on the following documents: FDIS Report on voting 110/62/FDIS 110/67/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.



61988-3-1  IEC:2005 – 7 – IEC 61988 consists of the following parts, under the general title Plasma display panels: Part 1:
Terminology and letter symbols; Part 2-1:
Measuring methods – Optical; Part 2-2:
Measuring methods – Optoelectrical;
Part 2-3:
Measuring methods – Quality1; Part 3-1:
Mechanical interface;
Part 3-2:
Electrical interface; Part 4:
Environmental and mechanical endurance test methods; Part 5:
Generic specification.
The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed; • withdrawn; • replaced by a revised edition, or
...