SIST EN 13087-10:2012

Protective helmets - Test methods - Part 10: Resistance to radiant heat

This European Standard specifies methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard.
This European Standard specifies the method of test for resistance to radiant heat.

Schutzhelme - Prüfverfahren - Teil 10: Beständigkeit gegen Strahlungswärme

Die Europäische Norm legt Prüfverfahren für Schutzhelme fest. Zweck dieser Prüfungen ist die Beurteilung der Gebrauchstauglichkeit des Helmes, wie es in der entsprechenden Norm für Helme festgelegt ist.
Diese Europäische Norm legt das Verfahren zur Bestimmung der Stoßdämpfung fest.

Casques de protection - Méthodes d'essai - Partie 10: Résistance à la chaleur radiante

La présente Norme européenne décrit des méthodes d'essai pour les casques de protection. Ces essais sont
destinés à permettre l’évaluation de la performance du casque spécifiée dans la norme de casque appropriée.
La présente Norme européenne spécifie la méthode d'essai pour la résistance à la chaleur radiante.

Varovalne čelade - Preskusne metode - 10. del: Odpornost proti toplotnemu sevanju

Ta evropski standard določa preskusne metode za varovalne čelade. Namen teh preskusov je omogočiti oceno lastnosti čelade, kot je določeno v ustreznem standardu za čelado. Ta evropski standard določa preskusne metode za odpornost proti toplotnemu sevanju.

General Information

• Status: Published
• Public Enquiry End Date: 09-Oct-2011
• Publication Date: 03-Jun-2012
• ICS: 13.340.20 - Head protective equipment
• Technical Committee: OVP - Personal protecting equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 11-May-2012
• Due Date: 16-Jul-2012
• Completion Date: 04-Jun-2012
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: EN 13087-10:2012 - Protective helmets - Test methods - Part 10: Resistance to radiant heat

Relations

• Replaces: SIST EN 13087-10:2001 - Protective helmets - Test methods - Part 10: Resistance to radiant heat
• Effective Date: 01-Jul-2012
• Replaces: SIST EN 13087-10:2001 - Protective helmets - Test methods - Part 10: Resistance to radiant heat
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SORWQHPXVHYDQMXSchutzhelme - Prüfverfahren - Teil 10: Beständigkeit gegen StrahlungswärmeCasques de protection - Méthodes d'essai - Partie 10: Résistance à la chaleur radianteProtective helmets - Test methods - Part 10: Resistance to radiant heat13.340.20Varovalna oprema za glavoHead protective equipmentICS:Ta slovenski standard je istoveten z:EN 13087-10:2012SIST EN 13087-10:2012en,fr,de01-julij-2012SIST EN 13087-10:2012SLOVENSKI
STANDARDSIST EN 13087-10:20011DGRPHãþD



SIST EN 13087-10:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13087-10
February 2012 ICS 13.340.20 Supersedes EN 13087-10:2000English Version
Protective helmets - Test methods - Part 10: Resistance to radiant heat
Casques de protection - Méthodes d'essai - Partie 10: Résistance à la chaleur radiante
Schutzhelme - Prüfverfahren - Teil 10: Beständigkeit gegen Strahlungswärme This European Standard was approved by CEN on 17 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13087-10:2012: ESIST EN 13087-10:2012



EN 13087-10:2012 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Terms and definitions .54Prerequisites .55Methods .55.1General .55.2Principle .65.3Apparatus .65.3.1General .65.3.2Heater .65.3.3Calibrated calorimeter/radiometer .65.3.4Headform .65.3.5Temperature sensing elements .65.4Procedure .75.5Report .7Annex A (normative)
Test results – Uncertainty of measurement .9Annex B (informative)
Significant technical changes between this European Standard and EN 13087-10:2000. 10Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC Personal Protective Equipment . 11 SIST EN 13087-10:2012



EN 13087-10:2012 (E) 3 Foreword This document (EN 13087-10:2012) has been prepared by Technical Committee CEN/TC 158 “Head protection”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13087-10:2000. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Annex B provides details of significant technical changes between this European Standard and the previous edition. This European Standard consists of ten parts as follows: Part 1 : Conditions and conditioning; Part 2 : Shock absorption; Part 3 : Resistance to penetration; Part 4 : Retention system effectiveness; Part 5 : Retention system strength; Part 6 : Field of vision; Part 7 : Flame resistance; Part 8 : Electrical properties; Part 9 : Mechanical rigidity1; Part 10 : Resistance to radiant heat. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
1 To be published. SIST EN 13087-10:2012



EN 13087-10:2012 (E) 4 Introduction This European Standard is intended as a supplement to the specific product standards for protective helmets (helmet standards). Test methods may be applicable to complete helmets or parts thereof, and may be referenced in the other helmet standards. Performance requirements are
...