SIST EN 3813:2014

Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De ≤ 50 mm

This standard specifies the requirements relating to: Titanium alloy Ti-6Al-4V Annealed Bar and wire for forged fasteners De ≤ 50 mm for aerospace applications.

Luft- und Raumfahrt - Titanlegierung TI-P64001(Ti-6Al-4V) - Geglüht - Stangen und Drähte zum Warmstauchschmied für Verbindungselemente - De ≤ 50 mm

Diese Norm legt die Anforderungen an:
Titanlegierung Ti-6Al-4V Geglüht Stangen und Drähte zum Warmstauchschmieden für Verbindungselemente De ≤ 50 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Barre et fil pour éléments de fixations forgées - De ≤ 50 mm

Aeronavtika - Titanova zlitina TI-P64001 (Ti-6Al-4V) - Žarjeno - Palice in žice za kovane vezne elemente - De ≤ 50 mm

General Information

• Status: Published
• Publication Date: 02-Jan-2014
• ICS: 49.025.30 - Titanium
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 23-Dec-2013
• Due Date: 27-Feb-2014
• Completion Date: 03-Jan-2014
• Ref Project: EN 3813:2013 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De ≤ 50 mm

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 3813:2013SIST EN 3813:2014en01-februar-2014SIST EN 3813:2014SLOVENSKI
STANDARD



SIST EN 3813:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3813
January 2013 ICS 49.025.30 English Version
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De ≤ 50 mm
Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Barre et fil pour éléments de fixations forgées - De ≤ 50 mm
Luft- und Raumfahrt - Titanlegierung TI-P64001(Ti-6Al-4V) - Geglüht - Stangen und Drähte zum Warmstauchschmieden für Verbindungselemente - De ≤ 50 mm This European Standard was approved by CEN on 10 March 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3813:2013: ESIST EN 3813:2014



EN 3813:2013 (E) 2 Contents Foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5
SIST EN 3813:2014



EN 3813:2013 (E) 3 Foreword This document (EN 3813:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 3813:2014



EN 3813:2013 (E) 4 Introduction This standard is part of the series of EN me
...