Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature)/425 °C

This document specifies the characteristics of externally threaded fasteners, 100° countersunk normal head, Spiral Drive Recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated, for aerospace applications.
Classification: 1 100 MPa /425 °C

Luft- und Raumfahrt - 100° Senkschraube mit Spiral Antrieb, enge Schafttoleranz, kurzes Gewinde, aus Titanlegierung, Aluminium IVD beschichtet - Klasse: 1 100 MPa (bei Raumtemperatur)/425 °C

Dieses Dokument legt die Eigenschaften von Verbindungselementen mit Außengewinde, 100° Senkkopfschraube, Spiral-Antrieb, enge Schafttoleranz, kurzes Gewinde, aus Titanlegierung, Aluminium-IVD-beschichtet, für Luft- und Raumfahrtanwendungen fest.

Série aérospatiale - Vis à tête fraisée normale 100°, empreinte en spirale, tige normale à tolérance large, filetage court, en alliage de titane, revêtue d’aluminium IVD - Classification : 1 100 MPa (à température ambiante)/425 °C

Le présent document spécifie les caractéristiques des éléments de fixation à filetage extérieur, à tête fraisée normale 100°, empreinte en spirale, tige normale à tolérance large, filetage court, en alliage de titane, revêtus d’aluminium IVD, pour les applications aérospatiales.
Classification : 1 100 MPa/425 °C.

Aeronavtika - Vijak, 100° ugrezna glava, spiralna vdolbina, ozka toleranca, kratek navoj, iz titanove zlitine, prevlečene z aluminijem IVD - Klasifikacija: 1100 MPa (pri temperaturi okolice)/425 °C

Ta dokument določa značilnosti zunanjih navojnih veznih elementov – 100° ugrezna glava, spiralna vdolbina, ozka toleranca, kratek navoj, iz titanove zlitine, prevlečenih z aluminijem IVD – za uporabo v aeronavtiki.
Klasifikacija: 1100 MPa/425 °C.

General Information

Status
Published
Publication Date
05-Apr-2022
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
30-Mar-2022
Due Date
04-Jun-2022
Completion Date
06-Apr-2022

Buy Standard

Standard
EN 4849:2022
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4849:2022
01-maj-2022
Aeronavtika - Vijak, 100° ugrezna glava, spiralna vdolbina, ozka toleranca, kratek
navoj, iz titanove zlitine, prevlečene z aluminijem IVD - Klasifikacija: 1100 MPa (pri
temperaturi okolice)/425 °C
Aerospace series - Screw, 100° countersunk normal head, Spiral Drive Recess, close
tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated -
Classification: 1 100 MPa (at ambient temperature)/425 °C
Luft- und Raumfahrt - 100° Senkschraube mit Spiral Antrieb, enge Schafttoleranz, kurzes
Gewinde, aus Titanlegierung, Aluminium IVD beschichtet - Klasse: 1 100 MPa (bei
Raumtemperatur)/425 °C
Série aérospatiale - Vis à tête fraisée normale 100°, empreinte en spirale, tige normale à
tolérance large, filetage court, en alliage de titane, revêtue d’aluminium IVD -
Classification : 1 100 MPa (à température ambiante)/425 °C
Ta slovenski standard je istoveten z: EN 4849:2022
ICS:
49.025.20 Aluminij Aluminium
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN 4849:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4849:2022

---------------------- Page: 2 ----------------------
SIST EN 4849:2022


EN 4849
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2022
EUROPÄISCHE NORM
ICS 49.030.20
English Version

Aerospace series - Screw, 100° countersunk normal head,
Spiral Drive Recess, close tolerance normal shank, short
thread, in titanium alloy, aluminium IVD coated -
Classification: 1 100 MPa (at ambient temperature)/425
°C
Série aérospatiale - Vis à tête fraisée normale 100°, Luft- und Raumfahrt - 100° Senkschraube mit Spiral
empreinte en spirale, tige normale à tolérance large, Antrieb, enge Schafttoleranz, kurzes Gewinde, aus
filetage court, en alliage de titane, revêtue d'aluminium Titanlegierung, Aluminium IVD beschichtet - Klasse: 1
IVD - Classification : 1 100 MPa (à température 100 MPa (bei Raumtemperatur)/425 °C
ambiante)/425 °C
This European Standard was approved by CEN on 10 January 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4849:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 4849:2022
EN 4849:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Requirements . 6
4.1 Configuration — Dimensions — Masses . 6
4.2 Tolerances of form and position . 10
4.3 Materials . 10
4.4 Surface treatment . 10
4.5 Lubrication . 10
5 Designation . 10
6 Marking . 10
7 Technical specification . 11
8 Oversize bolts . 11
Bibliography. 12

2

---------------------- Page: 4 ----------------------
SIST EN 4849:2022
EN 4849:2022 (E)
European foreword
This document (EN 4849:2022) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2022, and conflicting national standards shall
be withdrawn at the latest by September 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
3

---------------------- Page: 5 ----------------------
SIST EN 4849:2022
EN 4849:2022 (E)
Introduction
Aerospace and Defence Standardisation (ASD-STAN) draws attention to the fact that it is claimed that
compliance with this document may involve the use of a patent “Spiral Drive System for Threaded
Fasteners” EP1025370B1.
ASD-STAN takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured ASD-STAN that he/she is willing to negotiate licences under
reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this
respect, the statement of the holder of this patent right is registered with ASD-STAN. Information may be
obtained from:
Phillips Screw Company
301 Edgewater Drive, Suite 320
Wakefield, Massachusetts 01880
USA
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights other than those identified above. ASD-STAN shall not be held responsible for identifying
any or all such patent rights.
4

---------------------- Page: 6 ----------------------
SIST EN 4849:2022
EN 4849:2022 (E)
1 Scope
This document specifie
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.