SIST ISO 1625:1996

Plastics -- Aqueous dispersions of polymers and copolymers -- Determination of residue at 105 degrees C

Plastiques -- Dispersions aqueuses de polymères et copolymères -- Détermination du résidu à 105 degrés C

Polimerni materiali - Vodne disperzije polimerov in kopolimerov - Določanje ostanka pri 105° C

General Information

• Status: Withdrawn
• Publication Date: 31-May-1996
• Withdrawal Date: 31-May-2001
• ICS: 83.080.01 - Plastics in general
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Jun-2001
• Due Date: 01-Jun-2001
• Completion Date: 01-Jun-2001
• Ref Project: ISO 1625:1977 - Plastics — Aqueous dispersions of polymers and copolymers — Determination of residue at 105 degrees C

Relations

• Replaced By: SIST ISO 1625:2001 - Plastics -- Polymer dispersions -- Determination of non-volatile matter (residue) at specified temperatures
• Effective Date: 01-Jun-2001

Standards Content (Sample)

INTERNATIONAL STANDARD
~~~~~~~~~~~~~~
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION *MEXnYHAPOflHAR OPiAHU3AUMR no CTAHilAPTU3AUAU .ORGANISATION INTERNATIONALE DE NORMALISATION
Plastics - Aqueous dispersions of polymers and copolymers
k.
- Determination of residue at 105 "C
Plastiques - Dispersions aqueuses de polymères et copolymères - Détermination du résidu à 105 'C
First edition - 1977-11-15
-
w
-
Ref. No. IS0 1625-1977 (E)
UDC 678.7 : 541.182 : 543.814
r-
r-
z
Descriptors : plastics, aqueous dispersions, tests, high temperature tests, determination of content, residues.
v)
N
(9
?
E
Price based on 3 pages

---------------------- Page: 1 ----------------------
FOREWORD
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 member bodies). The work of developing
International Standards is carried out through IS0 technical committees. Every
member body interested in a subject for which a technical committee has been set
up has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
as International
to the member bodies for approval before their acceptance
Standards by the IS0 Council.
International Standard IS0 1625 was developed by Technical Committee
ISO/TC 6 1, Plastics.
It was submitted directly to the IS0 Council, in accordance with clause 6.12.1
of the Directives for the technical work of ISO. It cancels and replaces IS0
Recommendation R 1625-1970, which had been approved by the member bodies
of the following countries :
Austria I ran South Africa, Rep. of
Belgium Israel Sweden
Czech oslova k ia Italy Switzerland
Egypt, Arab Rep. of Japan Turkey
France Korea, Rep. of United Kingdom
Germany Netherlands U.S.A.
Hungary Poland U.S.S. R.
India Portugal
No member body had expressed disapproval of the document.
O International organization for Standardization, 1977
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD IS0 1625-1977 (E)
Plastics - Aqueous dispersions of polymers and copolymers
- Determination of residue at 105 "C
1 SCOPE AND FIELD OF APPLICATION 3.1.3 Apparatus C
This International Standard specifies a method for the Metal or glass dish of about 70 mm diameter, having a rim
determination of residue of aqueous dispersions at 105 OC. with a minimum height of 3 mm.
The procedure is suitable for all aqueous polymer and
NOTE - This apparatus is recommended particularly for very fluid
'L dispersions, because it avoids any overflow.
copolymer dispersions which are chemically stable at the
test temperature and which do not contain other volatile
as organic solvents.
matter such 3.2 Oven, with natural air ventilation, capable of being
at 105 _+ 2 OC.
controlled
The residue of unplasticized aqueous polymer and
copolymer dispersions consists essentially of the polymer
3.3 Desiccator containing a suitable desiccant, for example
or copolymer and of a small quantity of additives, such as
calcium chloride or silica gel.
emulsifiers, protective colloids, etc.
For plasticized dispersions, the plasticizer is included in the
3.4 Balance, accurate to 0,000 1 g
residue.
Under the conditions of temperature and time adopted in
this method, the product should not show any thermal
4 PROCEDURE
degradation; otherwise different conditions should be used
test report.
and specified in the
4.1 Using apparatus A
4.1.1 Place the two parts of the unit (3.1.1), arranged
2 PRINCIPLE
as shown in figure 3, in the oven (3.21, controlled at
105 f 2 OC, and leave them for about 30 min. Allow them
Stoving at 105"C, for 1 h, of a test portion spread in a
to cool in the desiccator (3.3) for about 30 min, then weigh
thin, even layer, and weighing of the residue obtained.
the unit to the nearest 0,000 1 g.
'L
3 APPARATUS 4.1.2 With the aid of a glass rod or a small spatula, pour
1 f 0,2 g of the dispersion being tested onto the centre of
the lower plate. This operation is easier if the upper plate IS
3.1 Spreading and evaporation apparatus
removed from its support.
It is essential to obtain an evenly spread fi
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Plastiques -- Dispersions aqueuses de polymères et copolymères -- Détermination du résidu à 105 degrés CPlastics -- Aqueous dispersions of polymers and copolymers -- Determination of residue at 105 degrees C83.080.01Polimerni materiali na splošnoPlastics in generalICS:Ta slovenski standard je istoveten z:ISO 1625:1977SIST ISO 1625:1996en01-junij-1996SIST ISO 1625:1996SLOVENSKI
STANDARD



SIST ISO 1625:1996



INTERNATIONAL STANDARD ~~~~~~~~~~~~~~ INTERNATIONAL ORGANIZATION FOR STANDARDIZATION *MEXnYHAPOflHAR OPiAHU3AUMR no CTAHilAPTU3AUAU .ORGANISATION INTERNATIONALE DE NORMALISATION Plastics - Aqueous dispersions of polymers and copolymers - Determination of residue at 105 "C k. Plastiques - Dispersions aqueuses de polymères et copolymères - Détermination du résidu à 105 'C First edition - 1977-11-15 - UDC 678.7 : 541.182 : 543.814 Ref. No. IS0 1625-1977 (E) w r- r- - z v) N (9 Descriptors : plastics, aqueous dispersions, tests, high temperature tests, determination of content, residues. ? E Price based on 3 pages SIST ISO 1625:1996



FOREWORD IS0 (the International Organization for Standardization) is a worldwide federation of national standards institutes (IS0 member bodies). The work of developing International Standards is carried out through IS0 technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the IS0 Council. International Standard IS0 1625 was developed by Technical Committee ISO/TC 6 1, Plastics. It was submitted directly to the IS0 Council, in accordance with clause 6.12.1 of the Directives for the technical work of ISO. It cancels and replaces IS0 Recommendation R 1625-1970, which had been approved by the member bodies of the following countries : Austria Belgium Czech oslova k ia Egypt, Arab Rep. of France Germany Hungary India I ran South Africa, Rep. of Israel Sweden Italy Switzerland Japan Turkey Korea, Rep. of United Kingdom Netherlands U.S.A. Poland U.S.S. R. Portugal No member body had expressed disapproval of the document. O International organization for Standardization, 1977 Printed in Switzerland SIST ISO 1625:1996



INTERNATIONAL STANDARD IS0 1625-1977 (E) Plastics - Aqueous dispersions of polymers and copolymers - Determination of residue at 105 "C 1 SCOPE AND FIELD OF APPLICATION This International Standard specifies a method for the determination of residue of aqueous dispersions at 105 OC. The procedure is suitable for all aqueous polymer and copolymer dispersions which are chemically stable at the test temperature and which do not contain other volatile matter such as organic solvents. The residue of unplasticized aqueous polymer and copolymer dispersions consists essentially of the polymer or copolymer and of a small quantity of additives, such as emulsifiers, protective colloids, etc. For plasticized dispersions, the plasticizer is included in the residue. Under the conditions of temperature and time adopted in this method, the product should not show any thermal degradation; otherwise different conditions should be used and specified in the test report. 'L 2 PRINCIPLE Stoving at 105"C, for 1 h, of a test portion spread in a thin, even layer, and weighing of the residue obtained. 'L 3 APPARATUS 3.1 Spreading and evaporation apparatus It is essential to obtain an evenly spread film of about 0.15 mm, for which one of the following devices is suitable. 3.1 .I Apparatus A The unit illustrated in figures 1, 2 and 3, consisting of two glass plates of diameter about 60 mm, one of the plates being provided with a support for the other one. The inside circular surfaces shall be perfectly flat and smooth. 3.1.2 Apparatus B Aluminium foils about 0,l mm thick, cut into rectangles of about 60 mm x 120 mm. NOTE - The apparatuses described in 3.1.1 and 3.1.2 are recommended particularly for very viscous dispersions, because they are capable of spreading the film automatically 3.1.3 Apparatus C Metal o
...

NORME INTERNATIONALE 1625
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEYLIYHAF'OnHAR OPTAHWAUHR no CTAHnAPTH3AUHH.ORGANISATION INTERNATIONALE DE NORMALISATION
Plastiques - Dispersions aqueuses de polymères et de
'
copolymères - Détermination du résidu à 105 "C
Plastics - Aqueous dispersions of polymers and copolymers - Determination of residue at 105 "C
Première édition - 1977-1 1-15
U
-
Réf. no : IS0 1625-1977 (F)
CDU 678.7 : 541.182 : 543.814
PI
m
c
Descripteurs : plastique, dispersion aqueuse, essai, essai a haute température, dosage, résidu chimique.
ln
(v
?
O
2
Prix basé sur 3 pages

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L'ISO (Organisation internationale de normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (comités membres de I'ISO). L'élaboration
des Normes internationales est confiée aux comités techniques de I'ISO. Chaque
a le droit de faire partie du comité technique
comité membre intéressé par une étude
et non
correspondant. Les organisations internationales, gouvernementales
avec I'ISO, participent également aux travaux.
gouvernementales, en liaison
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I'ISO.
La Norme internationale IS0 1625 a été élaborée par le comité technique
lSO/TC 61, Matières plastiques.
Elle fut soumise directement au Conseil de I'ISO, conformément au paragraphe
6.12.1 des Directives pour les travaux techniques de I'ISO. Elle annule et remplace
la Recommandation ISO/R 1625-1970, qui avail été approuvée par les comités
membres des pays suivants :
Afrique du Sud, Rép. d' Inde Royaume-Uni
I ran
Allemagne Suède
Suisse
Autriche Israël
Tchécoslovaquie
Belgique Italie
Turquie
Corée, Rép. de Japon
Égypte, Rép. arabe d' Pays-Bas U.R.S.S.
France Pologne U.S.A.
Hongrie Portugal
Aucun comité membre ne l'avait désapprouvée.
O Organisation internationda de normalisation, 1977
imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE IS0 1625-1977 (FI
Plastiques - Dispersions aqueuses de polymères et
copolymères - Détermination du résidu à 105 "C
1 OBJET ET DOMAINE D'APPLICATION 3.1.3 Dispositif C
La présente Norme internationale spécifie une méthode de Cristallisoir en métal ou en verre, forme basse, de diamètre
détermination du résidu à 105 OC des dispersions aqueuses. environ 70 mm et de hauteur minimale 3 mm.
La méthode est applicable à toutes les dispersions aqueuses NOTE - Ce dispositif est particulièrement recommandé pour les
dispersions très fluides, car il évite tout débordement.
de polymères et copolymères, chimiquement stables à la
température d'essai et qui ne contiennent pas d'autres
\- ' substances volatiles, telles que des solvants organiques. 3.2 Étuve, à légère ventilation naturelle, réglable
à 105 f 2 OC.
Le résidu des dispersions aqueuses non plastifiées de
polymères et copolymères est constitué essentiellement par
3.3 Dessiccateur, contenant un agent desséchant
le polymère ou copolymère et par une petite quantité
convenable, par exemple : chlorure de calcium ou gel de
d'additifs, tels que émulsifiants, colloïdes protecteurs, etc.
silice.
Pour les dispersions plastifiées, le plastifiant est compris
dans le résidu. 3.4 Balance, précise à 0,000 1 g.
Dans les conditions de température et de durée fixées par la
méthode, le produit ne doit pas présenter de dégradation
4 MODE OPÉRATOIRE
thermique; sinon, d'autres conditions doivent être utilisées
et précisées dans le procès-verbal d'essai.
4.1 Avec le dispositif A
2 PRINCIPE
4.1.1 Placer les deux parties de l'ensemble (3.1.1),
disposées comme indiqué à la figure 3, dans l'étuve (3.2),
Mise à l'étuve, à 105 OC durant 1 h, d'une prise d'essai
réglée à 105 _+ 2 OC, et les y laisser durant 30 min environ.
étalée en couche mince régulière, et pesée du résidu obtenu.
Les laisser refroidir dans le dessiccateur (3.3) durant 30 min
environ et peser ensuite l'ensemble à 0,000 1 g près.
3 APPAREILLAGE
.... 4.1.2 Sur le centre du disque inférieur, verser une prise
d'essai de 7 f 0,2 g, à l'aide d'une baguette en verre ou
3.1 Appareil d'étalement et d'évaporation
d'une petite spatule. Cette opération est facilitée en
L'essentiel étant d'obtenir une couche régulièrement étalée,
enlevant du support le disque supérieu
...