SIST EN ISO 4865-1:2024
(Main)Dentistry - General requirements of hand instruments - Part 1: Non-hinged hand instruments (ISO 4865-1:2023)
Dentistry - General requirements of hand instruments - Part 1: Non-hinged hand instruments (ISO 4865-1:2023)
This document specifies requirements and test methods common to all non-hinged metallic dental hand instruments including materials, hardness, surface finish, resistance to reprocessing and information for marking. It does not specify terms and definitions or classification of specific types of hand instruments. This document excludes powered instruments.
Zahnheilkunde - Allgemeine Anforderungen an Handinstrumente - Teil 1: Gelenklose Handinstrumente (ISO 4865-1:2023)
Dieses Dokument legt Anforderungen und Prüfverfahren für alle in der Zahnheilkunde verwendeten gelenklosen Handinstrumente fest, einschließlich Werkstoff, Härte, Oberflächenbeschaffenheit, Beständigkeit gegenüber Wiederaufbereitung und Informationen zur Kennzeichnung. Für einige Instrumente können jedoch zusätzliche spezifische Anforderungen und Prüfverfahren gelten.
Dieses Dokument legt keine Begriffe fest oder klassifiziert bestimmte Arten von Handinstrumenten.
Dieses Dokument gilt nicht für elektrisch betriebene Instrumente. Die Klassifizierung und die Form der Arbeitsenden der gelenklosen Handinstrumente sind nicht Gegenstand dieses Dokuments.
Médecine bucco-dentaire - Exigences générales relatives aux instruments à main - Partie 1: Instruments à main non articulés (ISO 4865-1:2023)
Zobozdravstvo - Splošne zahteve za ročne instrumente - 1. del: Ročni instrumenti brez tečajev (ISO 4865-1:2023)
Ta dokument določa zahteve in preskusne metode za vse zobozdravstvene ročne instrumente brez tečajev, vključno z materiali, trdoto, površinsko obdelavo, odpornostjo proti ponovni obdelavi in informacijami za označevanje. Ne določa izrazov in definicij oziroma klasifikacije posebnih vrst ročnih instrumentov. Ta dokument izključuje električne instrumente.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4865-1:2024
01-februar-2024
Zobozdravstvo - Splošne zahteve za ročne instrumente - 1. del: Ročni instrumenti
brez tečajev (ISO 4865-1:2023)
Dentistry - General requirements of hand instruments - Part 1: Non-hinged hand
instruments (ISO 4865-1:2023)
Zahnheilkunde - Allgemeine Anforderungen an Handinstrumente - Teil 1: Gelenklose
Handinstrumente (ISO 4865-1:2023)
Médecine bucco-dentaire - Exigences générales relatives aux instruments à main -
Partie 1: Instruments à main non articulés (ISO 4865-1:2023)
Ta slovenski standard je istoveten z: EN ISO 4865-1:2023
ICS:
11.060.25 Zobotehnični instrumenti Dental instruments
SIST EN ISO 4865-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4865-1:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 4865-1:2024
EN ISO 4865-1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 11.060.20
English Version
Dentistry - General requirements of hand instruments -
Part 1: Non-hinged hand instruments (ISO 4865-1:2023)
Médecine bucco-dentaire - Exigences générales Zahnheilkunde - Teil 1: Allgemeine Anforderungen an
relatives aux instruments à main - Partie 1: gelenklose Handinstrumente (ISO 4865-1:2023)
Instruments à main non articulés (ISO 4865-1:2023)
This European Standard was approved by CEN on 5 August 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4865-1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4865-1:2024
EN ISO 4865-1:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4865-1:2024
EN ISO 4865-1:2023 (E)
European foreword
This document (EN ISO 4865-1:2023) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2024, and conflicting national standards shall be
withdrawn at the latest by April 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4865-1:2023 has been approved by CEN as EN ISO 4865-1:2023 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 4865-1:2024
---------------------- Page: 6 ----------------------
SIST EN ISO 48
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.