SIST EN 301 908-3 V5.2.1:2011

IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)

TThe present document applies to the following radio equipment type:
• Base Stations for IMT-2000 CDMA Direct Spread (UTRA FDD).
This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1-1.
The present document covers requirements for UTRA FDD Base Stations for Releases 99, 4, 5, 6, 7, 8 and 9. In addition, the present document covers requirements for UTRA FDD Base Stations in the operating bands specified in TS 102 735 [i.4].
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present document.

Celična omrežja IMT - Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE - 3. del: CDMA z neposrednim razprševanjem (“Direct Spread”) (UTRA FDD) bazne postaje (BS)

Ta dokument velja za naslednjo vrsto radijske opreme:
• bazne postaje za neposredno razprševanje IMT-2000 (UTRA FDD).
Ta vrsta radijske opreme je zmožna delovati v vseh ali katerem koli delu frekvenčnega pasu, kot so navedeni v preglednici 1-1.
Ta dokument zajema zahteve za bazne postaje UTRA FDD za izdaje 99, 4, 5, 6, 7, 8, in 9. Poleg tega ta dokument zajema zahteve za bazne postaje UTRA FDD v pasovih delovanja, določenih v TS 102 735 [i.4].
Ta dokument zajema določbe člena 3.2. Direktive 1999/5/ES [i.2] (direktive R&TTE), ki navaja, da » … radijska oprema je narejena tako, da učinkovito izrablja spekter, razporejen za prizemne/vesoljske radiokomunikacije in orbitalne vire, tako da ne pride do škodljivega motenja«.
Poleg tega dokumenta se preostali EN, ki določajo tehnične zahteve v skladu z bistvenimi zahtevami v drugih delih člena 3 direktive R&TTE [i.2], lahko uporabljajo za opremo v okviru uporabe tega dokumenta.

General Information

• Status: Published
• Public Enquiry End Date: 31-Jan-2011
• Publication Date: 04-Aug-2011
• ICS: 33.060.99 - Other equipment for radiocommunications
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 25-Jul-2011
• Due Date: 29-Sep-2011
• Completion Date: 05-Aug-2011
• Directive: 1999/5/EC - Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity
• Mandate: M/284
• Ref Project: ETSI EN 301 908-3 V5.2.1 (2011-07) - IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-3 Version 5.2.1SIST EN 301 908-3 V5.2.1:2011en01-september-2011SIST EN 301 908-3 V5.2.1:2011SLOVENSKI
STANDARD



SIST EN 301 908-3 V5.2.1:2011



ETSI EN 301 908-3 V5.2.1 (2011-07)Harmonized European Standard IMT cellular networks;Harmonized EN covering the essential requirementsof article 3.2 of the R&TTE Directive;Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) SIST EN 301 908-3 V5.2.1:2011



ETSI ETSI EN 301 908-3 V5.2.1 (2011-07) 2
Reference REN/MSG-TFES-006-3 Keywords 3G, 3GPP, cellular, digital, IMT-2000, mobile, radio, regulation, UMTS, UTRA, WCDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-3 V5.2.1:2011



ETSI ETSI EN 301 908-3 V5.2.1 (2011-07) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 7 1 Scope . 8 2 References . 8 2.1 Normative references . 8 2.2 Informative references . 9 3 Definitions, symbols and abbreviations . 9 3.1 Definitions . 9 3.2 Symbols . 11 3.3 Abbreviations . 11 4 Technical requirements specifications . 12 4.1 Environmental profile . 12 4.2 Conformance requirements . 12 4.2.1 Introduction. 12 4.2.2 Spectrum emissions mask . 13 4.2.2.1 Definition . 13 4.2.2.2 Limit . 13 4.2.2.3 Conformance . 15 4.2.3 Adjacent channel leakage power ratio (ACLR) . 15 4.2.3.1 Definition . 15 4.2.3.2 Limits . 15 4.2.3.3 Conformance . 16 4.2.4 Transmitter spurious emissions . 16 4.2.4.1 Definition . 16 4.2.4.2 Limits . 16 4.2.4.2.1 Spurious emissions . 16 4.2.4.2.2 Co-existence with other systems . 17 4.2.4.2.3 Co-existence with services in adjacent frequency bands . 18 4.2.4.2.4 Protection of the BS receiver of own or different BS . 18 4.2.4.2.5 Co-existence with Home BS operating in other bands . 19 4.2.4.3 Conformance . 19 4.2.5 Base Station maximum output power . 19 4.2.5.1 Definition . 19 4.2.5.2 Limit . 20 4.2.5.3 Conformance . 20 4.2.6 Transmit intermodulation . 20 4.2.6.1 Definition . 20 4.2.6.2 Limit . 20 4.2.6.3 Conformance . 20 4.2.7 Receiver spurious emissions . 21 4.2.7.1 Definition . 21 4.2.7.2 Limit . 21 4.2.7.3 Conformance . 21 4.2.8 Blocking characteristics . 21 4.2.8.1 Definition . 21 4.2.8.2 Limit . 21 4.2.8.3 Conformance . 25 4.2.9 Receiver intermodulation characteristics . 25 4.2.9.1 Definition . 25 4.2.9.2 Limit . 25 4.2.9.3 Conformance . 27 4.2.10 Receiver adjacent channel selectivity . 27 SIST EN 301 908-3 V5.2.1:2011



ETSI ETSI EN 301 908-3 V5.2.1 (2011-07) 4 4.2.10.1 Definition . 27 4.2.10.2 Limit . 27 4.2.10.3 Conformance . 28 4.2.11 Home BS output power for adjacent channel protection . 28 4.2.11.1 Definition . 28 4.2.11.2 Limit . 28 4.2.11.3 Conformance . 29 5 Testing for compliance with technical requirements . 29 5.1 Environmental conditions for testing . 29 5.2 Interpretation of the measurement results . 29 5.3 Essential radio test suites . 30 5.3.1 Spectrum emission mask . 30 5.3.1.1 Initial conditions . 31 5.3.1.2 Procedures . 31 5.3.2 Adjacent Channel Leakage power Ratio (ACLR) . 31 5.3.2.1 Initial conditions . 31 5.3.2.2 Procedure . 31 5.3.3 Transmitter spurious emissions . 32 5.3.3.1 Initial conditions . 32 5.3.3.2 Procedure . 32 5.3.4 Base Station maximum output power . 32 5.3.4.1 Initial conditions . 32 5.3.4.2 Procedure . 32 5.3.5 Transmit intermodulation . 33 5.3.5.1 Initial conditions . 33 5.3.5.2 Procedures . 33 5.3.6 Receiver spurious emissions . 33 5.3.6.1 Initial conditions . 33 5.3.6.2 Procedure . 34 5.3.7 Blocking characteristics . 34 5.3.7.1 Initial conditions . 34 5.3.7.2 Procedure . 34 5.3.8 Receiver intermodulation characteristics . 35 5.3.8.1 Initial conditions . 35 5.3.8.2 Procedures . 35 5.3.9 Adjacent Channel Selectivity (ACS) . 35 5.3.9.1 Initial conditions . 35 5.3.9.2 Procedure . 36 5.3.10 Home BS output power for adjacent channel protection . 36 5.3.10.1 Initial conditions . 36 5.3.10.2 Procedure . 36 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 37 Annex B (normative): Base Station configurations . 39 B.1 Receiver diversity . 39 B.2 Duplexers . 39 B.3 Power supply options . 39 B.4 Ancillary RF amplifiers . 40 B.5 BS using antenna arrays . 40 B.5.1 Receiver tests . 41 B.5.2 Transmitter tests . 41 B.6 Transmit diversity and MIMO transmission . 41 B.7 BS with integrated Iuant BS modem . 42 Annex C (informative): Environmental profile specification . 43 SIST EN 301 908-3 V5.2.1:2011



ETSI ETSI EN 301 908-3 V5.2.1 (2011-07) 5 Annex D (informative): The EN title in the official languages . 44 Annex E (informative): Bibliography . 45 History . 46
SIST EN 301 908-3 V5.2.1:2011



ETSI ETSI EN 301 908-3 V5.2.1 (2011-07) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has been produced by ETSI in response to mandate M/284 from the European Commission issued under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The title and reference to the present document are intended to included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2]. See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [i.2] are summarised in annex A. The present document is part 3 of a multi-part deliverable covering the essential requirements under article 3.2 of Directive 1999/5/EC [i.2] (R&TTE Directive) for Base Stations (BS), Repeaters and User Equipment (UE) for IMT cellular networks, as identified below: Part 1: "Introduction and common requirements"; Part 2: "CDMA Direct Spread (UTRA FDD) User Equipment (UE)"; Part 3: "CDMA Direct Spread (UTRA FDD) Base Stations (BS)"; Part 4: "CDMA Multi-Carrier (cdma2000) User Equipment (UE)"; Part 5: "CDMA Multi-Carrier (cdma2000) Base Stations (BS)"; Part 6: "CDMA TDD (UTRA TDD) User Equipment (UE)"; Part 7: "CDMA TDD (UTRA TDD) Base Stations (BS)"; Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 10: "Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 11: "CDMA Direct Spread (UTRA FDD) (Repeaters)"; Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 13:
"Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)"; SIST EN 301 908-3 V5.2.1:2011



ETSI ETSI EN 301 908-3 V5.2.1 (2011-07) 7 Part 14:
"Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)"; Part 15:
"Evolved Universal Terrestrial Radio Access (E-UTRA FDD) (Repeaters)"; Part 16:
"Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 17:
"Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 18:
"E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)"; Part 19:
"OFDMA TDD WMAN (Mobile WiMAX) TDD User Equipment (UE)"; Part 20:
"OFDMA TDD WMAN (Mobile WiMAX) TDD Base Stations (BS)"; Part 21:
"OFDMA TDD WMAN (Mobile WiMAX) FDD User Equipment (UE)"; Part 22:
"OFDMA TDD WMAN (Mobile WiMAX) FDD Base Stations (BS)".
National transposition dates Date of adoption of this EN: 4 July 2011 Date of latest announcement of this EN (doa): 31 October 2011 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 April 2012 Date of withdrawal of any conflicting National Standard (dow): 30 April 2013
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The modular structure is shown in EG 201 399 [i.3]. SIST EN 301 908-3 V5.2.1:2011



ETSI ETSI EN 301 908-3 V5.2.1 (2011-07) 8 1 Scope The present document applies to the following radio equipment type: • Base Stations for IMT-2000 CDMA Direct Spread (UTRA FDD). This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1-1. Table 1-1: UTRA FDD Base Station operating bands UTRA FDD
band Direction of transmission UTRA FDD Base Station operating bands I Transmit 2 110 MHz to 2 170 MHz Receive 1 920 MHz to 1 980 MHz III Transmit 1 805 MHz to 1 880 MHz Receive 1 710 MHz to 1 785 MHz VII Transmit 2 620 MHz to 2 690 MHz Receive 2 500 MHz to 2 570 MHz VIII Transmit 925 MHz to 960 MHz Receive 880 MHz to 915 MHz XV Transmit 2 600 MHz to 2 620 MHz Receive 1 900 MHz to 1 920 MHz XVI Transmit 2 585 MHz to 2 600 MHz Receive 2 010 MHz to 2 025 MHz XX Transmit 791 MHz to 821 MHz Receive 832 MHz to 862 MHz
The present document covers requirements for UTRA FDD Base Stations for Releases 99, 4, 5, 6, 7, 8 and 9. In addition, the present document covers requirements for UTRA FDD Base Stations in the operating bands specified in TS 102 735 [i.4]. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http://www.newapproach.org/. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. [1] Void. SIST EN 301 908-3 V5.2.1:2011



ETSI ETSI EN 301 908-3 V5.2.1 (2011-07) 9 [2] ETSI TS 125 141 (V9.7.0): "Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 9.7.0 Release 9)". [3] ITU-R Recommendation SM.329-11 (2011): "Unwanted emissions in the spurious domain". [4] ITU-T Recommendation O.153 (1992): "Basic parameters for the measurement of error performance at bit rates below the primary rate". [5] ETSI EN 301 908-1 (V5.2.1): "IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 1: Introduction and common requirements". [6] ETSI TS 145 004 (V9.1.0): "Digital cellular telecommunications system (Phase 2+); Modulation (3GPP TS 45.004 version 9.1.0 Release 9)". [7] Void. [8] ETSI EN 301 908-18 (V5.2.1): "IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)". [9] ETSI TS 125 104 (V9.6.0): "Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 9.6.0 Release 9)". 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [i.2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [i.3] ETSI EG 201 399 (V2.2.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of Harmonized Standards for application under the R&TTE Directive". [i.4] ETSI TS 102 735 (V7.1.0): "Universal Mobile Telecommunications System (UMTS); Band-specific requirements for UMTS Frequency Division Duplex (FDD) operation in the bands 1 900 MHz to 1 920 MHz paired with 2 600 MHz to 2 620 MHz and 2 010 MHz to 2 025 MHz paired with 2 585 MHz to 2 600 MHz". [i.5] ETSI TR 102 215 (V1.3.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Recommended approach, and possible limits for measurement uncertainty for the measurement of radiated electromagnetic fields above
...

Final draft ETSI EN 301 908-3 V5.2.1 (2011-05)
Harmonized European Standard


IMT cellular networks;
Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive;
Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)

---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 301 908-3 V5.2.1 (2011-05)



Reference
REN/MSG-TFES-006-3
Keywords
3G, 3GPP, cellular, digital, IMT-2000, mobile,
radio, regulation, UMTS, UTRA, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2011.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 301 908-3 V5.2.1 (2011-05)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 11
3.3 Abbreviations . 11
4 Technical requirements specifications . 12
4.1 Environmental profile . 12
4.2 Conformance requirements . 12
4.2.1 Introduction. 12
4.2.2 Spectrum emissions mask . 13
4.2.2.1 Definition . 13
4.2.2.2 Limit . 13
4.2.2.3 Conformance . 15
4.2.3 Adjacent channel leakage power ratio (ACLR) . 15
4.2.3.1 Definition . 15
4.2.3.2 Limits . 15
4.2.3.3 Conformance . 16
4.2.4 Transmitter spurious emis sions . 16
4.2.4.1 Definition . 16
4.2.4.2 Limits . 16
4.2.4.2.1 Spurious emissions . 16
4.2.4.2.2 Co-existence with other systems . 17
4.2.4.2.3 Co-existence with services in adjacent frequency bands . 18
4.2.4.2.4 Protection of the BS receiver of own or different BS . 18
4.2.4.2.5 Co-existence with Home BS operating in other bands . 19
4.2.4.3 Conformance . 19
4.2.5 Base Station maximum output power . 19
4.2.5.1 Definition . 19
4.2.5.2 Limit . 20
4.2.5.3 Conformance . 20
4.2.6 Transmit intermodulation . 20
4.2.6.1 Definition . 20
4.2.6.2 Limit . 20
4.2.6.3 Conformance . 20
4.2.7 Receiver spurious emissions . 21
4.2.7.1 Definition . 21
4.2.7.2 Limit . 21
4.2.7.3 Conformance . 21
4.2.8 Blocking characteristics . 21
4.2.8.1 Definition . 21
4.2.8.2 Limit . 21
4.2.8.3 Conformance . 25
4.2.9 Receiver intermodulation characteristics . 25
4.2.9.1 Definition . 25
4.2.9.2 Limit . 25
4.2.9.3 Conformance . 27
4.2.10 Receiver adjacent channel selectivity . 27
ETSI

---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 301 908-3 V5.2.1 (2011-05)
4.2.10.1 Definition . 27
4.2.10.2 Limit . 27
4.2.10.3 Conformance . 28
4.2.11 Home BS output power for adjacent channel protection . 28
4.2.11.1 Definition . 28
4.2.11.2 Limit . 28
4.2.11.3 Conformance . 29
5 Testing for compliance with technical requirements . 29
5.1 Environmental conditions for testing . 29
5.2 Interpretation of the measurement results . 29
5.3 Essential radio test suites . 30
5.3.1 Spectrum emission mask . 30
5.3.1.1 Initial conditions . 31
5.3.1.2 Procedures . 31
5.3.2 Adjacent Channel Leakage power Ratio (ACLR) . 31
5.3.2.1 Initial conditions . 31
5.3.2.2 Procedure . 31
5.3.3 Transmitter spurious emis sions . 32
5.3.3.1 Initial conditions . 32
5.3.3.2 Procedure . 32
5.3.4 Base Station maximum output power . 32
5.3.4.1 Initial conditions . 32
5.3.4.2 Procedure . 32
5.3.5 Transmit intermodulation . 33
5.3.5.1 Initial conditions . 33
5.3.5.2 Procedures . 33
5.3.6 Receiver spurious emissions . 33
5.3.6.1 Initial conditions . 33
5.3.6.2 Procedure . 34
5.3.7 Blocking characteristics . 34
5.3.7.1 Initial conditions . 34
5.3.7.2 Procedure . 34
5.3.8 Receiver intermodulation characteristics . 35
5.3.8.1 Initial conditions . 35
5.3.8.2 Procedures . 35
5.3.9 Adjacent Channel Selectivity (ACS) . 35
5.3.9.1 Initial conditions . 35
5.3.9.2 Procedure . 36
5.3.10 Home BS output power for adjacent channel protection . 36
5.3.10.1 Initial conditions . 36
5.3.10.2 Procedure . 36
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 37
Annex B (normative): Base Station configurations . 39
B.1 Receiver diversity . 39
B.2 Duplexers . 39
B.3 Power supply options . 39
B.4 Ancillary RF amplifiers . 40
B.5 BS using antenna arrays . 40
B.5.1 Receiver tests . 41
B.5.2 Transmitter tests . 41
B.6 Transmit diversity and MIMO transmission . 41
B.7 BS with integrated Iuant BS modem . 42
Annex C (informative): Environmental profile specification . 43
ETSI

---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 301 908-3 V5.2.1 (2011-05)
Annex D (informative): The EN title in the official languages . 44
Annex E (informative): Bibliography . 45
History . 46

ETSI

---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 301 908-3 V5.2.1 (2011-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile
Standards Group (MSG), and is now submitted for the Vote phase of the ETSI standards Two-step Approval Procedure.
The present document has been produced by ETSI in response to mandate M/284 from the European Commission
issued under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information
in the field of technical standards and regulations.
The title and reference to the present document are intended to included in the publication in the Official Journal of the
European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2].
See article 5.1 of Directive 1999/5/EC for information on presumption of conformity and Harmonised Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.2] are summarised in annex A.
The present document is part 3 of a multi-part deliverable covering the essential requirements under article 3.2 of
Directive 1999/5/EC [i.2] (R&TTE Directive) for Base Stations (BS), Repeaters and User Equipment (UE) for IMT
cellular networks, as identified below:
Part 1: "Introduction and common requirements";
Part 2: "CDMA Direct Spread (UTRA FDD) User Equipment (UE)";
Part 3: "CDMA Direct Spread (UTRA FDD) Base Stations (BS)";
Part 4: "CDMA Multi-Carrier (cdma2000) User Equipment (UE)";
Part 5: "CDMA Multi-Carrier (cdma2000) Base Stations (BS)";
Part 6: "CDMA TDD (UTRA TDD) User Equipment (UE)";
Part 7: "CDMA TDD (UTRA TDD) Base Stations (BS)";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 10: "Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive";
Part 11: "CDMA Direct Spread (UTRA FDD) (Repeaters)";
Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the essential
requirements of article 3.2 of the R&TTE Directive";
Part 13: "Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)";
ETSI

---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 301 908-3 V5.2.1 (2011-05)
Part 14: "Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)";
Part 15: "Evolved Universal Terrestrial Radio Access (E-UTRA FDD) (Repeaters)";
Part 16: "Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE)
covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 17: "Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS)
covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 18: "E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)";
Part 19: "OFDMA TDD WMAN (Mobile WiMAX) TDD User Equipment (UE)";
Part 20: "OFDMA TDD WMAN (Mobile WiMAX) TDD Base Stations (BS)";
Part 21: "OFDMA TDD WMAN (Mobile WiMAX) FDD User Equipment (UE)";
Part 22: "OFDMA TDD WMAN (Mobile WiMAX) FDD Base Stations (BS)".

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in EG 201 399 [i.3].
ETSI

---------------------- Page: 7 ----------------------
8 Final draft ETSI EN 301 908-3 V5.2.1 (2011-05)
1 Scope
The present document applies to the following radio equipment type:
• Base Stations for IMT-2000 CDMA Direct Spread (UTRA FDD).
This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1-1.
Table 1-1: UTRA FDD Base Station operating bands
UTRA FDD Direction of transmission UTRA FDD Base Station operating bands
band
I Transmit 2 110 MHz to 2 170 MHz
Receive 1 920 MHz to 1 980 MHz
III Transmit 1 805 MHz to 1 880 MHz
Receive 1 710 MHz to 1 785 MHz
VII Transmit 2 620 MHz to 2 690 MHz
Receive 2 500 MHz to 2 570 MHz
VIII Transmit 925 MHz to 960 MHz
Receive 880 MHz to 915 MHz
XV Transmit 2 600 MHz to 2 620 MHz
Receive 1 900 MHz to 1 920 MHz
XVI Transmit 2 585 MHz to 2 600 MHz
Receive 2 010 MHz to 2 025 MHz
XX Transmit 791 MHz to 821 MHz
Receive 832 MHz to 862 MHz

The present document covers requirements for UTRA FDD Base Stations for Releases 99, 4, 5, 6, 7, 8 and 9. In
addition, the present document covers requirements for UTRA FDD Base Stations in the operating bands specified in
TS 102 735 [i.4].
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2,
which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org/.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] Void.
ETSI

---------------------- Page: 8 ----------------------
9 Final draft ETSI EN 301 908-3 V5.2.1 (2011-05)
[2] ETSI TS 125 141 (V9.7.0): "Universal Mobile Telecommunications System (UMTS); Base
Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 9.7.0 Release 9)".
[3] ITU-R Recommendation SM.329-11 (2011): "Unwanted emissions in the spurious domain".
[4] ITU-T Recommendation O.153 (1992): "Basic parameters for the measurement of error
performance at bit rates below the primary rate".
[5] ETSI EN 301 908-1 (V5.2.1): "IMT cellular networks; Harmonized EN covering the essential
requirements of article 3.2 of the R&TTE Directive; Part 1: Introduction and common
requirements".
[6] ETSI TS 145 004 (V9.1.0): "Digital cellular telecommunications system (Phase 2+); Modulation
(3GPP TS 45.004 version 9.1.0 Release 9)".
[7] Void.
[8] ETSI EN 301 908-18 (V5.2.1): "IMT cellular networks; Harmonized EN covering the essential
requirements of article 3.2 of the R&TTE Directive; Part 18: E-UTRA, UTRA and GSM/EDGE
Multi-Standard Radio (MSR) Base Station (BS)".
[9] ETSI TS 125 104 (V9.6.0): "Universal Mobile Telecommunications System (UMTS); Base
Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 9.6.0 Release 9)".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[i.2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[i.3] ETSI EG 201 399 (V2.2.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
A guide to the production of Harmonized Standards for application under the R&TTE Directive".
[i.4] ETSI TS 102 735 (V7.1.0): "Universal Mobile Telecommunications System (UMTS);
Band-specific requirements for UMTS Frequency Division Duplex (FDD) operation in the bands
1 900 MHz
...